Magnate S16X48S12 16" x 48" Sanding Belts, 4 Belts/Pack - 120 Grit; X Weight; Silicon Carbide, Closed Coat, Resin Bond Polyester Backing
Please note: Product images are for illustrative purposes and may vary from the actual item.
This closed coat silicon carbide belt uses a heavy X-weight (100 grit or finer) or Y-weight (80 grit or coarser) resin bond polyester backing. Its silicon carbide grain will outlast aluminum oxide on softwoods. This belt cuts freer and will not load as readily. It is also used for grinding glass, ceramic, solid surface materials, stone, concrete block, nonferrous metals, titanium and stainless steel.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
Second only to diamond in hardness, silicon carbide is distinguished by its sharp, sliver-like grains that allow it to cut efficiently with light pressure. It is widely used for grinding nonferrous metals such as brass, copper, bronze, and aluminum, as well as for glass, wood, rubber, and plastics. Additional applications include finishing polyurethanes, primers, lacquers, and sealers, along with achieving specific finishes on stainless steels. Silicon carbide abrasives are typically black in color.
Closed Coat Abrasive Grain Coverage The surface is fully covered with abrasive grains, providing a denser cutting action. This design delivers a smoother finish and higher stock removal throughout the product's life. When loading is not an issue, Closed Coat abrasives offer longer life and lower overall cost, making them a preferred choice in both metalworking and woodworking applications.
Resin bond backings offer greater resistance to heat, are more durable in heavy stock removal applications and provide the best all-around bond system.
|
