Custom Made Tooling
Magnate custom makes carbide, diamond and
steel cutting tools i.e. router bits, shaper cutters and etc. (thereafter
referred to as Cutters) to
your specifications. All Cutters are industrial grade carbide tipped and
made in USA unless otherwise specified.
The procedure is as follows:
- Please download
and fill out our Custom Made Tooling Information Sheet.
E-mail or fax (800-733-9076 or
909-468-5745) the sheet with the dimensions of
the Cutters that you want. Specify the number of wings or flutes and
rotation. If the dimensions is not easy to describe, the ACTUAL size
of wood sample is desired.
- Upon receiving your drawing or wood
sample, Magnate will quote you the pricing usually within 24-48 hours by
e-mail, fax or phone whichever you prefer.
- Upon your agreement with the pricing, Magnate will provide
you with the CAD-like drawing (see example below) for your approval. Magnate's trained personnel
will then discuss the drawing with you if you have any questions.
- You will give us written approval or your signature on the final drawing.
- Upon receiving the written approval or your signature,
Magnate will make the Cutters according to the final drawing you approved.
- It usually takes 7-10 working days before we can ship the Cutters. Rush orders may require an extra charge.
You are responsible for providing an
accurate drawing. It must be paid in full before Magnate starts making the
Cutters. The charge is not refundable UNDER ANY CIRCUMSTANCES. If The Cutter is
defective or it does not fit the final drawing you approved, we will re-make it
at no extra charge. Beyond this, Magnate is not responsible for any damages
caused by any errors of yours, Magnate or any third parties.
Please call us at 800-827-2316 or 909-468-5747 or send e-mail to
[email protected] if you have further questions.
