Amana RC-2267 CNC Heavy Duty Spoilboard Surfacing - 1-3/4" Overall Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-15/64" Overall Length; 3 Flute; Planing, Flycutter and Leveler
Insert carbide spoilboard surfacing & chamfering router bit utilizes 4-sided carbide inserts, great for planing large surface areas. Higher number of teeth allows for a higher feed rate. Featuring solid carbide insert knives with four cutting edges that allow users to rotate the knife when one side becomes dull providing the highest-quality finish available. • Capable of removing thin layers of material, less than 0.001" per pass • Tool can plunge up to a maximum depth of 6mm (1 /4"), then start resurfacing • The unique chamfer corner insert design creates a flawless surface Designed for planing & chamfering the following materials: • MDF, Plywood/Chipboard, Plastic/Acrylic. • Fiberboard, Balsa Core, HDU Board • HDF/LDF, Epoxy (Epoxy Resins), UHMWPE • Hardwood/Softwood • For optimal results and maximum insert life, replace inserts with optional general purpose knives (sold separately). Perfect for: • Resurfacing spoilboards using CNC • Surfacing and finishing wood using timber slab machines • Planing large glued-up panels using CNC • Rabbeting and slotting Featuring: • Exclusive carbide grade for highest quality of cut • Utilizes 4-sided carbide inserts • Maximum cutting efficiency • Faster material removal process replacement knives: use AMANA RCK-459 for MDF, or use AMANA RCK-457 for general purpose. CNC feed and speed available online.
Please note: Product images are for illustrative purposes and may vary from the actual item.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
