Magnate, Inc.

Amana 55314 45-Degree Laminate Miter Joint Undercut Assembly - 1-3/8" Cutting Diameter; 1/4" Cutting Height; 1/2" Shank Diameter; 2-3/8" Overall Length; 4 Wing with 'Ultra-Glide'(TM) Bearing, Carbide Tipped

Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrait can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.

Please note: Product images are for illustrative purposes and may vary from the actual item.

Cancer and Reproductive Harm    WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder  ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.    Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.     More Safety Information     www.p65warnings.ca.gov  www.p65warnings.ca.gov/chemicals/cobalt-metal-powder  www.p65warnings.ca.gov/products/wood-dust