Magnate, Inc.

Amana 313004 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item.

Cancer and Reproductive Harm    WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder  ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.    Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.     More Safety Information     www.p65warnings.ca.gov  www.p65warnings.ca.gov/chemicals/cobalt-metal-powder  www.p65warnings.ca.gov/products/wood-dust