|
|
|
|
|
Amana 45506 Panel Pilot Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; Single Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $26.35 Our Price: $18.83 Savings: $7.52
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45402 Amana CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 3/8" Shank Diameter; 2-1/4" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45414 Amana CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45418 Amana CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45204 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45204 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $29.00 Our Price: $20.71 Savings: $8.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45406 Amana CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Height; 3/8" Shank Diameter; 2-1/2" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45208 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45208 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $29.75 Our Price: $21.26 Savings: $8.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45508 Panel Pilot Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 3/8" Shank Diameter; 3" Overall Length; Single Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $29.75 Our Price: $21.26 Savings: $8.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45210 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45210 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $30.70 Our Price: $21.93 Savings: $8.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43108 Plastic Router Bits - 'O' Flute - 1 Flute; 3/8" Cutting Diameter; 1" Cutting Height; 3/8" Shank Diameter; 2-1/4" Overall Length
New carbide tipped tools for fast cutting in harder more abrasive plastics such as phenolic resin, acrylic, etc.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43304 Plastic Router Bits - 'O' Flute - 2 Flute; 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length
New carbide tipped tools for fast cutting in harder more abrasive plastics such as phenolic resin, acrylic, etc.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45210-01 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45210-01 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $31.30 Our Price: $22.36 Savings: $8.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45400 Amana CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 3/8" Shank Diameter; 2-3/4" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45404 Amana CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 3/8" Shank Diameter; 3-3/8" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45214 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45214 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $32.00 Our Price: $22.86 Savings: $9.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45216 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45216 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $32.10 Our Price: $22.93 Savings: $9.17
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45416 Amana CNC Straight Plunge Router Bit - 7/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45500 Mortising Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $32.85 Our Price: $23.47 Savings: $9.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45510 Panel Pilot Router Bit - 1/2" Cutting Diameter; 1-3/16" Cutting Height; 1/2" Shank Diameter; 3-1/2" Overall Length; Single Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $33.20 Our Price: $23.71 Savings: $9.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45210-3 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Amana 45210-3 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.45 Our Price: $23.90 Savings: $9.55
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45203 CNC Straight Plunge Router Bit - 15/64" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45203 CNC Straight Plunge Router Bit - 15/64" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.85 Our Price: $24.19 Savings: $9.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45218 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45218 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.90 Our Price: $24.21 Savings: $9.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45218S CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45218S CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.90 Our Price: $24.21 Savings: $9.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45212 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45212 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $34.05 Our Price: $24.33 Savings: $9.72
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45224 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-3/4" Overall Length; 2-Flute Carbide Tipped
Amana 45224 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-3/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $34.25 Our Price: $24.47 Savings: $9.78
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45502 Mortising Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $34.60 Our Price: $24.71 Savings: $9.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45425 Amana CNC Straight Plunge Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45432 Amana CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45214-01 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Amana 45214-01 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.10 Our Price: $25.07 Savings: $10.03
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45410 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45410 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.70 Our Price: $25.50 Savings: $10.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45413 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45413 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.70 Our Price: $25.50 Savings: $10.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45414-LH Left Hand Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2 Flute, Carbide Tipped
Amana 45414-LH Left Hand Plunge Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2 Flute, Carbide Tipped
This special series of plunging straight bits is for reverse-rotation (counter-clockwise) routers.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.70 Our Price: $25.50 Savings: $10.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45242 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45242 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.75 Our Price: $25.54 Savings: $10.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45244 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-13/16" Overall Length; 2-Flute Carbide Tipped
Amana 45244 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-13/16" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.75 Our Price: $25.54 Savings: $10.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45211 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45211 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.80 Our Price: $25.57 Savings: $10.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45420 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45420 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.90 Our Price: $25.64 Savings: $10.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 51300 Stagger Tooth Plunge Cutting Router Bits - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2 Flute, Carbide Tipped
Amana 51300 Stagger Tooth Plunge Cutting Router Bits - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2 Flute, Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.90 Our Price: $25.64 Savings: $10.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45206 CNC Straight Plunge Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45206 CNC Straight Plunge Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45226 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 30mm Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Amana 45226 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 30mm Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45412 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Amana 45412 CNC Straight Plunge Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45227 CNC Straight Plunge Router Bit - 9/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2-Flute Carbide Tipped
Amana 45227 CNC Straight Plunge Router Bit - 9/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.30 Our Price: $25.93 Savings: $10.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45224-01 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45224-01 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.75 Our Price: $26.26 Savings: $10.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45245 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45245 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.90 Our Price: $26.36 Savings: $10.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 51309 Stagger Tooth Plunge Cutting Router Bits - 1/2" Cutting Diameter; 2-1/8" Cutting Height; 1/2" Shank Diameter; 4-1/4" Overall Length; 2 Flute, Carbide Tipped
Amana 51309 Stagger Tooth Plunge Cutting Router Bits - 1/2" Cutting Diameter; 2-1/8" Cutting Height; 1/2" Shank Diameter; 4-1/4" Overall Length; 2 Flute, Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.50 Our Price: $26.79 Savings: $10.71
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45205 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45205 CNC Straight Plunge Router Bit - 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.55 Our Price: $26.83 Savings: $10.72
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45470 Template Plunge 2-Flute Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 47712 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $37.85 Our Price: $27.04 Savings: $10.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45228 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45228 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.90 Our Price: $27.07 Savings: $10.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45422 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2-Flute Carbide Tipped
Amana 45422 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.90 Our Price: $27.07 Savings: $10.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45415 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Amana 45415 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.25 Our Price: $27.33 Savings: $10.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45426 Amana CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Height; 1/2" Shank Diameter; 4-1/4" Overall Length
• New generation of high wear outstanding carbide• New superior geometric design• New advanced automatic grinding technology that improves the carbides' resistance to wear• Super clean cuts• 200% longer life time even when working with abrasive materials• Cost effective
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45212-01 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Amana 45212-01 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.35 Our Price: $27.40 Savings: $10.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45222 CNC Straight Plunge Router Bit - 7/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2-Flute Carbide Tipped
Amana 45222 CNC Straight Plunge Router Bit - 7/16" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.45 Our Price: $27.47 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45223 CNC Straight Plunge Router Bit - 15/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45223 CNC Straight Plunge Router Bit - 15/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.45 Our Price: $27.47 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45247 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45247 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.45 Our Price: $27.47 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 51306 Stagger Tooth Plunge Cutting Router Bits - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2 Flute, Carbide Tipped
Amana 51306 Stagger Tooth Plunge Cutting Router Bits - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2 Flute, Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.45 Our Price: $27.47 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45238-01 CNC Straight Plunge Router Bit - 19/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45238-01 CNC Straight Plunge Router Bit - 19/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.45 Our Price: $27.47 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45420-LH Left Hand Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2 Flute, Carbide Tipped
Amana 45420-LH Left Hand Plunge Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2 Flute, Carbide Tipped
This special series of plunging straight bits is for reverse-rotation (counter-clockwise) routers.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.55 Our Price: $28.26 Savings: $11.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45220 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45220 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.70 Our Price: $28.36 Savings: $11.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45469 Template Plunge 2-Flute Router Bit - .615" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 47712 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $39.75 Our Price: $28.40 Savings: $11.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45217 CNC Straight Plunge Router Bit - 13/64" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45217 CNC Straight Plunge Router Bit - 13/64" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.75 Our Price: $28.40 Savings: $11.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45507 Panel Pilot Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-7/8" Overall Length; Single Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $39.95 Our Price: $28.54 Savings: $11.41
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45504 Mortising Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $40.35 Our Price: $28.83 Savings: $11.52
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45419 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45419 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $40.55 Our Price: $28.97 Savings: $11.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45193 CNC Straight Plunge Router Bit - 13/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45193 CNC Straight Plunge Router Bit - 13/32" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.55 Our Price: $29.69 Savings: $11.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45230 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45230 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.85 Our Price: $29.90 Savings: $11.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 51302 Stagger Tooth Plunge Cutting Router Bits - 3/8" Cutting Diameter; 1-3/8" Cutting Height; 3/8" Shank Diameter; 3" Overall Length; 2 Flute, Carbide Tipped
Amana 51302 Stagger Tooth Plunge Cutting Router Bits - 3/8" Cutting Diameter; 1-3/8" Cutting Height; 3/8" Shank Diameter; 3" Overall Length; 2 Flute, Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.20 Our Price: $30.14 Savings: $12.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45181 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45181 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.25 Our Price: $30.19 Savings: $12.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45430 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Amana 45430 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.30 Our Price: $30.21 Savings: $12.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45428 CNC Straight Plunge Router Bit - 9/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45428 CNC Straight Plunge Router Bit - 9/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.50 Our Price: $30.36 Savings: $12.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45401 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Amana 45401 CNC Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.70 Our Price: $31.93 Savings: $12.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45409 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Amana 45409 CNC Straight Plunge Router Bit - 9/32" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.70 Our Price: $31.93 Savings: $12.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45229 CNC Straight Plunge Router Bit - 11/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45229 CNC Straight Plunge Router Bit - 11/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.75 Our Price: $31.97 Savings: $12.78
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43504 Plastic Solid Carbide O-Flute Router Bit - 1 Flute; 3/16" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 2" Overall Length
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $44.90 Our Price: $32.07 Savings: $12.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45249 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45249 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1-1/4" Cutting Height; 1/4" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $45.70 Our Price: $32.64 Savings: $13.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 51304 Stagger Tooth Plunge Cutting Router Bits - 3/8" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2 Flute, Carbide Tipped
Amana 51304 Stagger Tooth Plunge Cutting Router Bits - 3/8" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2 Flute, Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $45.75 Our Price: $32.69 Savings: $13.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45251 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45251 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $46.35 Our Price: $33.11 Savings: $13.24
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45232 CNC Straight Plunge Router Bit - 13/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Amana 45232 CNC Straight Plunge Router Bit - 13/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $46.40 Our Price: $33.14 Savings: $13.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45424 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 4-1/4" Overall Length; 2-Flute Carbide Tipped
Amana 45424 CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 4-1/4" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.25 Our Price: $33.76 Savings: $13.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45440 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45440 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.30 Our Price: $33.79 Savings: $13.51
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45438 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Amana 45438 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.75 Our Price: $34.11 Savings: $13.64
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45251-01 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Amana 45251-01 CNC Straight Plunge Router Bit - 3/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.90 Our Price: $34.21 Savings: $13.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45426S CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Height; 1/2" Shank Diameter; 3-1/2" Overall Length; 2-Flute Carbide Tipped
Amana 45426S CNC Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Height; 1/2" Shank Diameter; 3-1/2" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.90 Our Price: $34.21 Savings: $13.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45429 CNC Straight Plunge Router Bit - 17/32" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45429 CNC Straight Plunge Router Bit - 17/32" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.95 Our Price: $34.26 Savings: $13.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 46110 Composite Cutting Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; Fine; End Mill Point Diamond Pattern
Amana 46110 Composite Cutting Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; Fine; End Mill Point Diamond Pattern
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. The up-cut/down-cut diamond pattern cutting edges effectively grinds through the material evenly in all directions.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.45 Our Price: $34.61 Savings: $13.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 46112 Composite Cutting Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; Coarse; End Mill Point Diamond Pattern
Amana 46112 Composite Cutting Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; Coarse; End Mill Point Diamond Pattern
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. The up-cut/down-cut diamond pattern cutting edges effectively grinds through the material evenly in all directions.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.45 Our Price: $34.61 Savings: $13.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 46110-M Composite Cutting Router Bit - 6.0mm Cutting Diameter; 18mm Cutting Height; 6mm Shank Diameter; 50mm Overall Length; Fine; End Mill Point Diamond Pattern
Amana 46110-M Composite Cutting Router Bit - 6.0mm Cutting Diameter; 18mm Cutting Height; 6mm Shank Diameter; 50mm Overall Length; Fine; End Mill Point Diamond Pattern
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. The up-cut/down-cut diamond pattern cutting edges effectively grinds through the material evenly in all directions.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.45 Our Price: $34.61 Savings: $13.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 55258 Mortising Cutters - 1/4"-28 thread - 1-1/4" Cutting Diameter; 5/8" Cutting Height; 2 Flute, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $48.60 Our Price: $34.71 Savings: $13.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45491 Template Plunge 2-Flute Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 47701 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $49.15 Our Price: $35.11 Savings: $14.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43512 Plastic Solid Carbide O-Flute Router Bit - 1 Flute; 1/4" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $49.55 Our Price: $35.40 Savings: $14.15
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45436 CNC Straight Plunge Router Bit - 11/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45436 CNC Straight Plunge Router Bit - 11/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.65 Our Price: $35.47 Savings: $14.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43500 Plastic Solid Carbide O-Flute Router Bit - 1 Flute; 1/8" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2" Overall Length
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $49.95 Our Price: $35.69 Savings: $14.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45434 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2-Flute Carbide Tipped
Amana 45434 CNC Straight Plunge Router Bit - 5/8" Cutting Diameter; 1-1/2" Cutting Height; 1/2" Shank Diameter; 3-1/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $50.35 Our Price: $35.97 Savings: $14.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45435 CNC Straight Plunge Router Bit - 21/32" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Amana 45435 CNC Straight Plunge Router Bit - 21/32" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; 2-Flute Carbide Tipped
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: Wood, MDF, Plywood. 200% longer lifetime even when working with abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $50.65 Our Price: $36.19 Savings: $14.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45476 Template Plunge 2-Flute Router Bit - .615" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 47712 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $50.65 Our Price: $36.19 Savings: $14.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45478 Template Plunge 2-Flute Router Bit - .615" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; 47712 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $50.65 Our Price: $36.19 Savings: $14.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45479 Template Plunge 2-Flute Router Bit - 9/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 47712 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $50.65 Our Price: $36.19 Savings: $14.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45361 Template Plunge 2-Flute Router Bit - 9/16" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-5/16" Overall Length; 47753 Bearing; With Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $51.15 Our Price: $36.54 Savings: $14.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43600 Plastic Solid Carbide O-Flute Router Bit - 2 Flute; 1/8" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2" Overall Length
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $51.25 Our Price: $36.61 Savings: $14.64
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 43604 Plastic Solid Carbide O-Flute Router Bit - 2 Flute; 3/16" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 2" Overall Length
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $51.25 Our Price: $36.61 Savings: $14.64
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 45584 Down-Shear Mortiser Router Bits - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 2-3/8" Overall Length; 47712 Bearing; 2 Flute with Upper Ball Bearing, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $51.25 Our Price: $36.61 Savings: $14.64
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
