Magnate, Inc.

Amana MB14108-30 Double-Face Melamine & Laminate Saw Blade - 14" Diameter; 108 Tooth; 30mm Bore; .126" Kerf; .102" Plate; With 2/7/42, 2/9/46 & 2/10/60 pin holes; 25-Degree H-ATB Grind, 6-Degree Negative Hook, Carbide Tipped

Designed specifically to cut melamine, this blade does just that without chipping on the top or bottom edges. (Your table saw must be properly tuned, of course.) The special High-ATB grind (with 25-degree bevels) slices cleanly through fragile surface coatings like melamine and laminate. Coupled with a thick, heavy-duty plate for added stability, this blade produces extremely smooth cuts. It is easily resharpened.

Please note: Product images are for illustrative purposes and may vary from the actual item.

Cancer and Reproductive Harm    WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder  ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.    Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.     More Safety Information     www.p65warnings.ca.gov  www.p65warnings.ca.gov/chemicals/cobalt-metal-powder  www.p65warnings.ca.gov/products/wood-dust