Magnate, Inc.

Magnate M150G14MC Carbide Grit Bandsaw Blade, 150" Long - 1/4" Width; 0.020" Thickness; Continuous Teeth for 1/4" or Thinner Material; 12' 6" (12 feet 6 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 150 inch (12 ft. 6 in.; 12' 6"; 12 pies 6 pulgadas; 150 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: DELTA 20" (year 1953 to 1997) 28-651W; DELTA 28-652, DELTA 28-653; DELTA 28-654; DELTA 28-656; DELTA 28-662; DELTA 28-663; DELTA 28-665; Jet JWBS-20QT; JET 20" JWBS-20QT-3; JET JWBS-20QT-5; Jet HBS-10-M; Jet HBS-12-A; Laguna LT16 HD; LAGUNA 16" LT16HD 4.5 HP NEW; LAGUNA 18" LT18 ACM 1997; Rockwell 10; Rockwell 10-A; Rockwell 12-A; Rockwell 20; Rockwell 20/930; Rockwell 20/931; Rockwell 20/960; Rockwell 20/961; Rockwell 20/970; Rockwell 260; Rockwell 260-A; Rockwell 28/340; Rockwell 28/345; Rockwell 28/651; Rockwell 28/652; Rockwell 28/653; Rockwell 28/654; Rockwell 28/655; Rockwell 28/656; Rockwell 28/662; Rockwell 28/663; Rockwell 28/664; Rockwell 28/665; POWERMATIC 20" 181; STEEL CITY 20""; WESTERN SAWYER; Amada 20; Autosaw 10-A; Batens T-350 ; Bliss 77-B-300; Climax Anglematic; Kalamazoo H-10-A; Kalamazoo H-205-A; Kalamazoo H-10-M; Kalamazoo H-205-A; Kalamazoo H-255-SA; Continental 10; Continental 100-M; Continental 10-A; Continental 12; Continental 120-A; Continental 12-A; Continental BS; Continental LF; Dake - Johnson 20 ; Enco 1362710 ; Enco 1362720; Friggi 400/104-A; Grob 4-V-18; Houghton; Hyd-Mech V-12-A; Jaespa MS-5; Jaespa MSP-5; Kasto BSM-220-BA; Leonard 10-A; Lian Feng LFBS-10 series; Lian Feng LFBS-12 series; Mastercut / Everising S-12 series; Mastercut / Everising S-300-HA; Mastercut / Everising S-330-HA; Meba 250; Meba 250-A; Meba 300-A; Meba 300-HS; Meba 320; Meba MEBAMAT; Metora HMB-280; Metora VMB-280; Mighty A; Mighty SA; Mighty SA-12-AA; Parma 14-10; Parma Trademaster; Peerless 1012-A; Peerless 1012-HB; Peerless 1014-A; Peerless HB-1012-A; Peerless HB-1012-M; Peerless HB-1014-A; Peerless HB-125-A; Phoenix PA-13; Qualters and Smith QSB-10; Qualters and Smith QSB-10-A; Qualters and Smith QSB-12-A; Roll In Journeyman; Sawmaster DY-500; Sawmaster DY-500-S; Serm S-330-HA; Startrite 200 Series; Startrite H-10; Startrite H-200-A; Startrite H-255-SA; Startrite H-300 series; Startrite H-320-A; Startrite H-321; Startrite H-325; T-Jaw 400-D; Ultra RH-360 series; Ultra RH-275 series; Victor S-330-HA; Wellsaw 1118; Wellsaw 1216-A; Wellsaw 1318; Wellsaw 1318-SA; Wellsaw 1316S

If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.

Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust