Magnate M132M114V3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Cuts solid materials approximately 1" to 2-1/2" thick
For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.
This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS
If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
