Amana LB14108 Plastic Cutting, Non-Melt Saw Blade - 14" Diameter; 108 Tooth; 1" Bore; .145" Kerf; .118" Plate; Modified TC Grind, 2-Degree Negative Hook, Carbide Tipped
When cutting acrylics and plastics, "chip-welding" a melting of the material is a concern. But not with this Non-Melt blade. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge. Excellent for cutting: Plastics, Acrylonitrile Butadiene Styrene (ABS), Acetal, Acrylic, Acrylic Sheets, Alupanel, Copolymer, Coroplast (A soft plastic cardboard made with super soft super flexible PVC.), Correx Boards, Corrugated Polypropolyene, Delrin, Epoxy, Ethylene-Vinyl Acetate, Foam Board, Gatorfoam (A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer), High Density Polyethylene (HDPE), High Impact Polystyrene (HIPS), High Pressure Laminates (HPL), Low Density Polyethylene (LDPE), Lucite, Mechanical/Engineered Plastics, Nitrile Rubber, Nylon, Perspex Cast Acrylic Sheet, Plastic Laminate Flooring, Plexiglas, Poly (methyl methacrylate) (PMMA), Polycarbonate (Lexan), Polyethylene (PE), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol-Modified (PETG / PET-G), Polypropylene (PP), Solid Surface, Styrene-Acrylonitrile, Styrene-Butadiene Rubber (SBR), Styrene-Isoprene-Styrene (SIS), Teflon, Thermoplastic, Polyolefin (TPO), Trespa Meteon ( Decorative high-pressure compact laminate (HPL) with an integral surface.), Ultra High Molecular Weight Polyethylene (UHMWPE) and Wood. Note: Alupanel, Coroplast, Gatorfoam, Lucite, Perspex, Plexiglas, Polycarbonate, Lexan, Teflon, Trespa and Meteon are registered trademarks of their respective owners. Use of these names is for identification purposes only.
Please note: Product images are for illustrative purposes and may vary from the actual item.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
