SuperCut B92.5P58V3 Carbide Impregnated Bandsaw Blade, 92-1/2" Long - 5/8" Width; 3-4 Variable Tooth; 0.025" Thickness; .030" Kerf; WoodSaver Plus Resaw Blade; 7' 8-1/2" (7 feet 8-1/2 inch) Long, For Woodcutting Only
Cuts solid materials approximately 1" to 2-1/2" thick
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience
This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS
If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
