SuperCut B70G38H4 Carbide Impregnated Bandsaw Blade, 70" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; Premium Gold 5' 10" (5 feet 10 inch) Long, For Woodcutting Only
Cuts solid materials approximately 1" to 2-1/2" thick
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214
If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
