SuperCut B63.5W38R14 Three Wheeler Bandsaw Blade, 63-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.014" Thickness; 5' 3-1/2" (5 feet 3-1/2 inch) Long, For 2 and 3 Wheel Tabletop Band Saws
It cuts solid materials approximately 3/16" to 7/16" thick
This 63-1/2 inch (5 ft. 3-1/2 in.; 5' 3-1/2"; 5 pies 3-1/2 pulgadas; 63-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 21461 Tilt Head; Hitachi 10” CB6Y Tilt Head
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
