SuperCut B156.5H12T3 Hawc Pro Resaw Bandsaw Blade - 156-1/2" Length; 1/2" Width; 3 Hook Tooth; High Silcon Content for Woodcutting, .025" Thickness, .045" kerf
This high-silicon-content HAWC Pro resaw blade features an aggressive tooth set and a modified gullet design that enhance cutting speed, extend blade life, and improve cut straightness. Its efficient sawdust removal makes it ideal for long or thick cuts. Designed for resawing materials up to 1/2" thick, it is the best all-around blade in its class. The special design and induction-hardened teeth provide superior durability and straighter cuts compared to conventional bandsaw blades. The blade includes teeth with a positive hook angle and an aggressive, modified raker set pattern: left, right, left, right, straight.
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
