SuperCut B125G34H3 Carbide Impregnated Bandsaw Blade, 125" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 10' 5" (10 feet 5 inch) Long, For Woodcutting Only
Cuts solid materials approximately 1-1/2" to 3" thick
Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.
This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience
This 125 inch (10 ft. 5 in.; 10' 5"; 10 pies 5 pulgadas; 125 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Laguna LT14 3000 Series; Laguna LT14 SUV; Laguna LT14 x14; JET 14" 3 HP #714550;714500; STEEL CITY 16”; DoAll 161; DoAll 1612; DoAll 16120; DoAll 16121; DoAll 16123; DoAll 3593; DoAll 3612/2-H; DoAll 36122; DoAll 36122-H-3; DoAll 36123;DoAll 3612-H; DoAll 3613/1; DoAll 3613/20; Enco 1999090; FMB Jupiter; FMB Major; Kalamazoo U-816; Muller HBA 240; Muller HBA 240 G; Roll In Contour-Matic 16; Startrite Standard 816; Upam 200; Upam Pneumatic Up-1; Upam UP-1; Upam UP-1-SA
If you are unsure of your bandsaw blade's correct length, follow these steps: Check the owner's manual for blade specifications, including length, width, and thickness. Refer to past invoices for blade details if the manual is unavailable. Measure your old blade with a soft cloth measuring tape: carefully uncoil the blade, press the tape firmly along the back edge, and record the full length. Measure on the floor: mark a starting point on both the blade and the floor, roll the blade in a straight line until the mark touches the floor again, then measure the distance between the two marks. As an alternative, cut the blade in half and lay it flat on a level surface to measure its full length accurately.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
