Magnate, Inc.

Amana 684004 Combination Ripping & Cross-Cut Saw Blade - 8" Diameter; 40 Tooth; 5/8" Bore; .087" Plate; .126" Kerf; 15-Degree Hook, 4 ATB & 1 Raker Grind, Carbide Tipped

Where one blade must do almost everything ripping and crosscutting hardwood and softwood, cutting plywood this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved chip ejection.

Please note: Product images are for illustrative purposes and may vary from the actual item.

Cancer and Reproductive Harm    WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder  ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.    Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.     More Safety Information     www.p65warnings.ca.gov  www.p65warnings.ca.gov/chemicals/cobalt-metal-powder  www.p65warnings.ca.gov/products/wood-dust