Amana 512961-30 Non-Ferrous Metal Thin-Walled Metal Saw Blade - 12" Diameter; 96 Tooth; 30mm Bore; .126" Kerf; .102" Plate; With 2/7/42, 2/9/46 & 2/10/60 Pin Holes; TC Grind, 6-Degree Negative Hook, Carbide Tipped
Thanks to its special carbide formulation and blade geometry, this is the ideal blade for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames. The negative hook angle (-6-Degree), triple-chip grind and thick plate combine to produce a superior finish. The blade can also be used to cut other "difficult" materials such as plastic, PVC tubing, fiberglass and ACM (Aluminum Composite Material). Warning: Never attempt to cut ferrous metals with these blades. Clamp down the workpiece. For optimal results and extended saw blade sharpness use blade wax, mist lubricant system or air cooling. Note: Pistorious and Hitachi are registered trademarks of their respective owners. Use of these names is for identification purposes only.
Please note: Product images are for illustrative purposes and may vary from the actual item.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
