Magnate, Inc.

MAGNATE 2201 1 Flute Compression Mortise Spiral Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; 1+1 Up-Down, Solid Carbide

This mortise compression bit is designed for double sided laminated or veneered material.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on lower horsepower router.

It is used where an excellent finish on top and bottom with short up-cut to allow mortise cut when down-cut is required.

Cancer and Reproductive Harm    WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder  ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.    Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.     More Safety Information     www.p65warnings.ca.gov  www.p65warnings.ca.gov/chemicals/cobalt-metal-powder  www.p65warnings.ca.gov/products/wood-dust