|
|
|
|
|
Amana 304010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Bilek Compatible; 48mm Overall Length; 19.3mm Large Diameter
Amana 304010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Bilek Compatible; 48mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $21.80 Our Price: $15.57 Savings: $6.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 304105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Bilek Compatible; 48mm Overall Length; 19.3mm Large Diameter
Amana 304105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Bilek Compatible; 48mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $21.80 Our Price: $15.57 Savings: $6.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 358010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Morbidelli, Nottmeyer Compatible; 41mm Overall Length; 19.3mm Large Diameter
Amana 358010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Morbidelli, Nottmeyer Compatible; 41mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $21.80 Our Price: $15.57 Savings: $6.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 303105 Boring Bits Machine Replacement Chucks - Left Hand Rotation; 10mm Shank Diameter; Busselatto, Ompec Machine; 46mm Overall Length; 19.3mm Large Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 310010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Nottmeyer Compatible; 40mm Overall Length; 19.3mm Large Diameter
Amana 310010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Nottmeyer Compatible; 40mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $25.60 Our Price: $18.29 Savings: $7.31
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313090 Through-Hole Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 9.0mm Cutting Diameter; 57mm Overall Length; 25mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313008 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313008 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.15 Our Price: $20.11 Savings: $8.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 302010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Torwegge, Ayen Compatible; 40mm Overall Length; 19.5mm Large Diameter
Amana 302010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Torwegge, Ayen Compatible; 40mm Overall Length; 19.5mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 302105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Torwegge, Ayen Compatible; 40mm Overall Length; 19.5mm Large Diameter
Amana 302105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Torwegge, Ayen Compatible; 40mm Overall Length; 19.5mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 303010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Busselatto, Ompec Compatible; 46mm Overall Length; 19.3mm Large Diameter
Amana 303010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Busselatto, Ompec Compatible; 46mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 305010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Holz-Her -S.C.M.I.- Morbidelli - Biese - Reimall Compatible; 41mm Overall Length; 19.3mm Large Diameter
Amana 305010 Boring Bits Machine Replacement Chuck - Right Rotation; 10mm Shank Diameter; Holz-Her -S.C.M.I.- Morbidelli - Biese - Reimall Compatible; 41mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 305105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Holz-Her -S.C.M.I.- Morbidelli - Biese - Reimall Compatible; 41mm Overall Length; 19.3mm Large Diameter
Amana 305105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Holz-Her -S.C.M.I.- Morbidelli - Biese - Reimall Compatible; 41mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 310105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Nottmeyer Compatible; 40mm Overall Length; 19.3mm Large Diameter
Amana 310105 Boring Bits Machine Replacement Chuck - Left Rotation; 10mm Shank Diameter; Nottmeyer Compatible; 40mm Overall Length; 19.3mm Large Diameter
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $28.50 Our Price: $20.36 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 363032 Brad Point Right-Handed Solid Carbide Drill - 3.2mm Drill Diameter; 55mm Overall Length; 3.2mm Shank Diameter
Amana 363032 Brad Point Right-Handed Solid Carbide Drill - 3.2mm Drill Diameter; 55mm Overall Length; 3.2mm Shank Diameter
Application: Boring machines for shelving hardware, etc. Use with 10mm shank drill adapters or bushings.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $29.00 Our Price: $20.71 Savings: $8.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201051 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201051 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $30.20 Our Price: $21.57 Savings: $8.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201070 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201070 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $30.20 Our Price: $21.57 Savings: $8.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201005 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201005 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $30.70 Our Price: $21.93 Savings: $8.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201052 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201052 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $31.40 Our Price: $22.43 Savings: $8.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202005 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202005 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $31.40 Our Price: $22.43 Savings: $8.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202052 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202052 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $31.40 Our Price: $22.43 Savings: $8.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315008 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Amana 315008 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $31.40 Our Price: $22.43 Savings: $8.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313009 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313009 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.00 Our Price: $23.57 Savings: $9.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204005 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204005 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.20 Our Price: $23.71 Savings: $9.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201055 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201055 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.85 Our Price: $24.19 Savings: $9.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204075 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204075 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $33.85 Our Price: $24.19 Savings: $9.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201007 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/4" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201007 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/4" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.05 Our Price: $25.04 Savings: $10.01
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201008 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201008 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.05 Our Price: $25.04 Savings: $10.01
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201006 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201006 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $35.70 Our Price: $25.50 Savings: $10.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201067 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 6.7mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202004 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202004 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.20 Our Price: $25.86 Savings: $10.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204052 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204052 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204055 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204055 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313004 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313004 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 363003 Brad Point Right-Handed Solid Carbide Drill - 3mm Drill Diameter; 55mm Overall Length; 3mm Shank Diameter
Amana 363003 Brad Point Right-Handed Solid Carbide Drill - 3mm Drill Diameter; 55mm Overall Length; 3mm Shank Diameter
Application: Boring machines for shelving hardware, etc. Use with 10mm shank drill adapters or bushings.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 363035 Brad Point Right-Handed Solid Carbide Drill - 3.5mm Drill Diameter; 55mm Overall Length; 3.5mm Shank Diameter
Amana 363035 Brad Point Right-Handed Solid Carbide Drill - 3.5mm Drill Diameter; 55mm Overall Length; 3.5mm Shank Diameter
Application: Boring machines for shelving hardware, etc. Use with 10mm shank drill adapters or bushings.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.25 Our Price: $25.90 Savings: $10.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204006 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204006 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.50 Our Price: $26.07 Savings: $10.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201045 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201045 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.90 Our Price: $26.36 Savings: $10.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204008 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204008 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.90 Our Price: $26.36 Savings: $10.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201004 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201004 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.40 Our Price: $26.71 Savings: $10.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 301012 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 12mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204007 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204007 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $37.85 Our Price: $27.04 Savings: $10.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201012 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 12mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201012 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 12mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.65 Our Price: $27.61 Savings: $11.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204004 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204004 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $38.65 Our Price: $27.61 Savings: $11.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313007 Through-Hole Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 1/4" Cutting Diameter; 57mm Overall Length; 25mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204011 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 11mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204011 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 11mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.90 Our Price: $28.50 Savings: $11.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204045 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204045 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.90 Our Price: $28.50 Savings: $11.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204070 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204070 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.90 Our Price: $28.50 Savings: $11.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314004 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314004 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.90 Our Price: $28.50 Savings: $11.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314006 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314006 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.90 Our Price: $28.50 Savings: $11.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204051 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204051 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $40.15 Our Price: $28.69 Savings: $11.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202082 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202082 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.10 Our Price: $29.36 Savings: $11.74
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313070 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313070 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.10 Our Price: $29.36 Savings: $11.74
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201090 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201090 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.75 Our Price: $29.83 Savings: $11.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201082 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201082 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.85 Our Price: $29.90 Savings: $11.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313005 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313005 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.20 Our Price: $30.14 Savings: $12.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204067 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204067 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.30 Our Price: $30.21 Savings: $12.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314055 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314055 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.30 Our Price: $30.21 Savings: $12.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201010 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201010 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.75 Our Price: $30.54 Savings: $12.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 302051 Brad Point Boring Bit - 77MM Long, 10MM Shank - Left Hand Rotation; 5.1mm Cutting Diameter; 77mm Overall Length; 44mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201065 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201065 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.20 Our Price: $30.86 Savings: $12.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201075 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201075 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.20 Our Price: $30.86 Savings: $12.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204090 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204090 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.30 Our Price: $30.93 Savings: $12.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201105 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201105 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.50 Our Price: $31.07 Savings: $12.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202070 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 7mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202070 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 7mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.50 Our Price: $31.07 Savings: $12.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314007 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314007 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.50 Our Price: $31.07 Savings: $12.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201009 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201009 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $43.60 Our Price: $31.14 Savings: $12.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 302090 Brad Point Boring Bit - 77MM Long, 10MM Shank - Left Hand Rotation; 9.0mm Cutting Diameter; 77mm Overall Length; 44mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202012 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 12mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202012 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 12mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.70 Our Price: $31.93 Savings: $12.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 363045 Metric Boring Drills - Right Hand Rotation; 4.5mm Drill Diameter; 55mm Overall Length; 4.5mm Shank Diameter
Application: Boring machines for shelving hardware, etc.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 302100 Brad Point Boring Bit - 77MM Long, 10MM Shank - Left Hand Rotation; 10mm Cutting Diameter; 77mm Overall Length; 44mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 313010 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Amana 313010 Through-Hole Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $46.10 Our Price: $32.93 Savings: $13.17
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204010 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204010 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.20 Our Price: $33.71 Savings: $13.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204009 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204009 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.30 Our Price: $33.79 Savings: $13.51
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 363005 Brad Point Right-Handed Solid Carbide Drill - 5mm Drill Diameter; 55mm Overall Length; 5mm Shank Diameter
Amana 363005 Brad Point Right-Handed Solid Carbide Drill - 5mm Drill Diameter; 55mm Overall Length; 5mm Shank Diameter
Application: Boring machines for shelving hardware, etc. Use with 10mm shank drill adapters or bushings.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $47.60 Our Price: $34.00 Savings: $13.60
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204047 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204047 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.15 Our Price: $34.40 Savings: $13.75
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202010 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 10mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202010 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 10mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.35 Our Price: $34.54 Savings: $13.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 202008 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Amana 202008 Brad Point Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 8mm Cutting Diameter; 44mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $48.40 Our Price: $34.57 Savings: $13.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314005 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314005 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.15 Our Price: $35.11 Savings: $14.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204082 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204082 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.65 Our Price: $35.47 Savings: $14.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314047 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314047 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $50.10 Our Price: $35.79 Savings: $14.31
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201013 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/2" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201013 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/2" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $50.35 Our Price: $35.97 Savings: $14.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315005 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.0mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Amana 315005 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 5.0mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $50.40 Our Price: $36.00 Savings: $14.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201016 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 16mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315006 Through-Hole Boring Bit - 77MM Long, 10MM Shank - Right Hand Rotation; 6.0mm Cutting Diameter; 77mm Overall Length; 45mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204012 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204012 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $51.90 Our Price: $37.07 Savings: $14.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 201014 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 14mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201014 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 14mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $52.00 Our Price: $37.14 Savings: $14.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314010 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314010 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $52.00 Our Price: $37.14 Savings: $14.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315090 Through-Hole Boring Bit - 77MM Long, 10MM Shank - Right Hand Rotation; 9.0mm Cutting Diameter; 77mm Overall Length; 45mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204065 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204065 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $53.45 Our Price: $38.19 Savings: $15.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204013 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204013 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.40 Our Price: $38.86 Savings: $15.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314070 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314070 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $55.00 Our Price: $39.29 Savings: $15.71
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204130 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 13mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204130 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 13mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $55.60 Our Price: $39.71 Savings: $15.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314009 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314009 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $55.60 Our Price: $39.71 Savings: $15.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315070 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Amana 315070 Through-Hole Right-Handed Boring Bit, 77mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 45mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $55.60 Our Price: $39.71 Savings: $15.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314008 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314008 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $56.00 Our Price: $40.00 Savings: $16.00
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 315010 Through-Hole Boring Bit - 77MM Long, 10MM Shank - Right Hand Rotation; 10mm Cutting Diameter; 77mm Overall Length; 45mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 204014 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 14mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204014 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 14mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $56.80 Our Price: $40.57 Savings: $16.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314012 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314012 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $58.05 Our Price: $41.47 Savings: $16.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 301105 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 10.5mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 314281 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9/32" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314281 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9/32" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $59.50 Our Price: $42.50 Savings: $17.00
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
