Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Amana® Tool > Amana® Boring Bits > Automatic Boring Machines > Through-Hole Boring Bit - 70MM Long, 10MM Shank Carbide Tipped
We found 16 results matching your criteria.

Carbide Tipped
Application: Do not use in portable drills or routers.
Sort By:
Page of 1
Amana 314004 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314004 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314004 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $39.90
Our Price: $28.50
Savings: $11.40
Qty Add
Amana 314006 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314006 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314006 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $39.90
Our Price: $28.50
Savings: $11.40
Qty Add
Amana 314055 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314055 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314055 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $42.30
Our Price: $30.21
Savings: $12.09
Qty Add
Amana 314007 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314007 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314007 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.50
Our Price: $31.07
Savings: $12.43
Qty Add
Amana 314005 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314005 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314005 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $49.15
Our Price: $35.11
Savings: $14.04
Qty Add
Amana 314047 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314047 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314047 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $50.10
Our Price: $35.79
Savings: $14.31
Qty Add
Amana 314010 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314010 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314010 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $52.00
Our Price: $37.14
Savings: $14.86
Qty Add
Amana 314070 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314070 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314070 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $55.00
Our Price: $39.29
Savings: $15.71
Qty Add
Amana 314009 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314009 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314009 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $55.60
Our Price: $39.71
Savings: $15.89
Qty Add
Amana 314008 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314008 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314008 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $56.00
Our Price: $40.00
Savings: $16.00
Qty Add
Amana 314012 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314012 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314012 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $58.05
Our Price: $41.47
Savings: $16.58
Qty Add
Amana 314281 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9/32" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314281 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9/32" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314281 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9/32" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $59.50
Our Price: $42.50
Savings: $17.00
Qty Add
Amana 314090 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314090 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314090 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9mm Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $64.45
Our Price: $46.04
Savings: $18.41
Qty Add
Amana 314013 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314013 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314013 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $65.30
Our Price: $46.64
Savings: $18.66
Qty Add
Amana 414014 Through-Hole Boring Bit - 70MM Long, 10MM Shank - Left Hand Rotation; 14mm Cutting Diameter; 70mm Overall Length; 40mm Boring Height
Amana 414014 Through-Hole Boring Bit - 70MM Long, 10MM Shank - Left Hand Rotation; 14mm Cutting Diameter; 70mm Overall Length; 40mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $49.95
Qty Add
Amana 314113 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314113 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped
Amana 314113 Through-Hole Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; V-Point, 40mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $111.25
Our Price: $79.47
Savings: $31.78
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>