Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Amana® Tool > Amana® Boring Bits > Automatic Boring Machines > Brad Point Boring Bit - 57MM Long, 10MM Shank Carbide Tipped
We found 31 results matching your criteria.

Carbide Tipped
Application: Do not use in portable drills or routers.
Sort By:
Page of 1
Amana 201051 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201051 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201051 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $30.20
Our Price: $21.57
Savings: $8.63
Qty Add
Amana 201070 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201070 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201070 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $30.20
Our Price: $21.57
Savings: $8.63
Qty Add
Amana 201005 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201005 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201005 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $30.70
Our Price: $21.93
Savings: $8.77
Qty Add
Amana 201052 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201052 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201052 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $31.40
Our Price: $22.43
Savings: $8.97
Qty Add
Amana 201055 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201055 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201055 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $33.85
Our Price: $24.19
Savings: $9.66
Qty Add
Amana 201007 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/4" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201007 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/4" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201007 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/4" Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $35.05
Our Price: $25.04
Savings: $10.01
Qty Add
Amana 201008 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201008 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201008 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $35.05
Our Price: $25.04
Savings: $10.01
Qty Add
Amana 201006 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201006 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201006 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $35.70
Our Price: $25.50
Savings: $10.20
Qty Add
Amana 201067 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 6.7mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 201067 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 6.7mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $25.62
Qty Add
Amana 201045 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201045 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201045 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $36.90
Our Price: $26.36
Savings: $10.54
Qty Add
Amana 201004 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201004 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201004 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $37.40
Our Price: $26.71
Savings: $10.69
Qty Add
Amana 301012 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 12mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 301012 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 12mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $26.84
Qty Add
Amana 201012 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 12mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201012 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 12mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201012 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 12mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $38.65
Our Price: $27.61
Savings: $11.04
Qty Add
Amana 201090 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201090 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201090 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $41.75
Our Price: $29.83
Savings: $11.92
Qty Add
Amana 201082 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201082 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201082 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $41.85
Our Price: $29.90
Savings: $11.95
Qty Add
Amana 201010 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201010 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201010 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $42.75
Our Price: $30.54
Savings: $12.21
Qty Add
Amana 201065 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201065 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201065 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.20
Our Price: $30.86
Savings: $12.34
Qty Add
Amana 201075 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201075 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201075 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.20
Our Price: $30.86
Savings: $12.34
Qty Add
Amana 201105 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201105 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201105 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 10.5mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.50
Our Price: $31.07
Savings: $12.43
Qty Add
Amana 201009 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201009 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201009 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 3/8" Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.60
Our Price: $31.14
Savings: $12.46
Qty Add
Amana 201013 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/2" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201013 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/2" Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201013 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 1/2" Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $50.35
Our Price: $35.97
Savings: $14.38
Qty Add
Amana 201016 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 16mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 201016 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 16mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $36.19
Qty Add
Amana 201014 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 14mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201014 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 14mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201014 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 14mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $52.00
Our Price: $37.14
Savings: $14.86
Qty Add
Amana 301105 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 10.5mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 301105 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 10.5mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $41.88
Qty Add
Amana 201018 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 18mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 201018 Brad Point Boring Bit - 57MM Long, 10MM Shank - Right Hand Rotation; 18mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $47.48
Qty Add
Amana 201015 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 15mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201015 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 15mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201015 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 15mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $71.10
Our Price: $50.79
Savings: $20.31
Qty Add
Amana 301018 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 18mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 301018 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 18mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $56.38
Qty Add
Amana 301017 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 17mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Amana 301017 Brad Point Boring Bit - 57MM Long, 10MM Shank - Left Hand Rotation; 17mm Cutting Diameter; 57mm Overall Length; 27mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $59.16
Qty Add
Amana 201017 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 17mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201017 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 17mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201017 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 17mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $101.60
Our Price: $72.57
Savings: $29.03
Qty Add
Amana 201019 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 19mm (3/4") Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201019 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 19mm (3/4") Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201019 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 19mm (3/4") Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $111.20
Our Price: $79.43
Savings: $31.77
Qty Add
Amana 201020 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 20mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201020 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 20mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped
Amana 201020 Brad Point Right-Handed Boring Bit, 57mm OAL x 10mm Shank - 20mm Cutting Diameter; 27mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $114.15
Our Price: $81.54
Savings: $32.61
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>