Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Grooving
We found 79 results matching your criteria.
V-Grooving Router Bit 2-Flute Carbide Tipped V-Grooving With Top Bearing Router Bit, 60 Degree 2 Flute Carbide Tipped V-Grooving With Top Bearing Router Bit, 90 Degree 2 Flute Carbide Tipped

2-Flute Carbide Tipped more info

2 Flute Carbide Tipped more info

2 Flute Carbide Tipped more info
V-Grooving & Carving 3-Flute Router Bit Carbide Tipped 60 Degree Lettering Router Bit 2 Flute Carbide Tipped Thread Cutting 90-Degree Router Bit 2-Flute Carbide Tipped

Carbide Tipped more info

2 Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Side V-Grooving Router Bit 2-Flute Carbide Tipped Side V-Grooving Extended Shank Router Bit 2-Flute Carbide Tipped Classic Plunge Beading Router Bit 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Cove & Bead Plunge Router Bit 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped Classic Spiral Router Bit 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped Large Cove Classic Plunge Router Bit 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped

1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped more info

1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped more info

1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped more info
Raised Panel Groove, 25 Degree Face-Cut Router Bit 2-Flute Carbide Tipped Plunge Flat Roundover Router Bit 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 700 V-Grooving Router Bit - 90 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 700 V-Grooving Router Bit - 90 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $12.19
Our Price: $11.08
Savings: $1.11
Qty Add
MAGNATE 701 V-Grooving Router Bit - 90 Degree; 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 701 V-Grooving Router Bit - 90 Degree; 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $12.35
Our Price: $11.23
Savings: $1.12
Qty Add
MAGNATE 710 V-Grooving Router Bit - 60 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 710 V-Grooving Router Bit - 60 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $13.82
Our Price: $12.56
Savings: $1.26
Qty Add
MAGNATE 702 V-Grooving Router Bit - 90 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 702 V-Grooving Router Bit - 90 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $13.83
Our Price: $12.57
Savings: $1.26
Qty Add
MAGNATE 711 V-Grooving Router Bit - 60 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 711 V-Grooving Router Bit - 60 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.17
Our Price: $12.88
Savings: $1.29
Qty Add
MAGNATE 731 V-Grooving Router Bit, 90 Degree with Top Bearing - 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-18 Bearing; 2 Flute Carbide Tipped
MAGNATE 731 V-Grooving Router Bit, 90 Degree with Top Bearing - 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-18 Bearing; 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $15.32
Our Price: $13.93
Savings: $1.39
Qty Add
MAGNATE 732 V-Grooving Router Bit, 90 Degree with Top Bearing - 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-05 Bearing; 2 Flute Carbide Tipped
MAGNATE 732 V-Grooving Router Bit, 90 Degree with Top Bearing - 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-05 Bearing; 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.89
Our Price: $15.35
Savings: $1.54
Qty Add
MAGNATE 741 V-Grooving Router Bit, 60 Degree with Top Bearing - 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-04 Bearing; 2 Flute Carbide Tipped
MAGNATE 741 V-Grooving Router Bit, 60 Degree with Top Bearing - 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-04 Bearing; 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $17.02
Our Price: $15.47
Savings: $1.55
Qty Add
MAGNATE 1251 Plunge Flat Roundover Router Bit - 3/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1251 Plunge Flat Roundover Router Bit - 3/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $17.08
Our Price: $15.53
Savings: $1.55
Qty Add
MAGNATE 712 V-Grooving Router Bit - 60 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 13/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 712 V-Grooving Router Bit - 60 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 13/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $17.99
Our Price: $16.35
Savings: $1.64
Qty Add
MAGNATE 703 V-Grooving Router Bit - 90 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 703 V-Grooving Router Bit - 90 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $18.19
Our Price: $16.54
Savings: $1.65
Qty Add
MAGNATE 1291 Classic Plunge Beading Router Bit - 5/64" Radius; 1/2" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1291 Classic Plunge Beading Router Bit - 5/64" Radius; 1/2" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.32
Our Price: $17.56
Savings: $1.76
Qty Add
MAGNATE 1252 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1252 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.39
Our Price: $17.63
Savings: $1.76
Qty Add
MAGNATE 721 V-Grooving Router Bit - 120 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 721 V-Grooving Router Bit - 120 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.91
Our Price: $18.10
Savings: $1.81
Qty Add
MAGNATE 704 V-Grooving Router Bit - 90 Degree; 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 704 V-Grooving Router Bit - 90 Degree; 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.94
Our Price: $18.13
Savings: $1.81
Qty Add
MAGNATE 1272 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1272 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.74
Our Price: $18.85
Savings: $1.89
Qty Add
MAGNATE 1262 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1262 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.79
Our Price: $18.90
Savings: $1.89
Qty Add
MAGNATE 1253 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1253 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $21.05
Our Price: $19.14
Savings: $1.91
Qty Add
MAGNATE 796 Thread Cutting 90-Degree Router Bit - 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 5/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 796 Thread Cutting 90-Degree Router Bit - 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 5/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $21.95
Our Price: $19.95
Savings: $2.00
Qty Add
MAGNATE 733 V-Grooving Router Bit, 90 Degree with Top Bearing - 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-09 Bearing; 2 Flute Carbide Tipped
MAGNATE 733 V-Grooving Router Bit, 90 Degree with Top Bearing - 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-09 Bearing; 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.26
Our Price: $20.24
Savings: $2.02
Qty Add
MAGNATE 1282 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1282 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.26
Our Price: $20.24
Savings: $2.02
Qty Add
MAGNATE 1292 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1292 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.29
Our Price: $20.26
Savings: $2.03
Qty Add
MAGNATE 761 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; Carbide Tipped
MAGNATE 761 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.41
Our Price: $20.37
Savings: $2.04
Qty Add
MAGNATE 1293 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1293 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.00
Our Price: $20.91
Savings: $2.09
Qty Add
MAGNATE 1256 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1256 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.19
Our Price: $21.08
Savings: $2.11
Qty Add
MAGNATE 781 60 Degree Lettering Router Bit - 1" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1/8" Radius; 1-1/4" Shank Length; Small diameter is about 7.04mm (0.277"); 2 Flute Carbide Tipped
MAGNATE 781 60 Degree Lettering Router Bit - 1" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1/8" Radius; 1-1/4" Shank Length; Small diameter is about 7.04mm (0.277"); 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.34
Our Price: $21.22
Savings: $2.12
Qty Add
MAGNATE 1273 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1273 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.53
Our Price: $21.39
Savings: $2.14
Qty Add
MAGNATE 1254 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1254 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.62
Our Price: $21.47
Savings: $2.15
Qty Add
MAGNATE 1268 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1268 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.67
Our Price: $21.52
Savings: $2.15
Qty Add
MAGNATE 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.69
Our Price: $21.54
Savings: $2.15
Qty Add
MAGNATE 716 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 1" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 716 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 1" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.76
Our Price: $21.60
Savings: $2.16
Qty Add
MAGNATE 734 V-Grooving Router Bit, 90 Degree with Top Bearing - 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length; BR-07 Bearing; 2 Flute Carbide Tipped
MAGNATE 734 V-Grooving Router Bit, 90 Degree with Top Bearing - 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length; BR-07 Bearing; 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.80
Our Price: $21.64
Savings: $2.16
Qty Add
MAGNATE 763 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length; Carbide Tipped
MAGNATE 763 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.07
Our Price: $21.88
Savings: $2.19
Qty Add
MAGNATE 705 V-Grooving Router Bit - 90 Degree; 7/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 705 V-Grooving Router Bit - 90 Degree; 7/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.23
Our Price: $22.03
Savings: $2.20
Qty Add
MAGNATE 1255 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1255 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.46
Our Price: $22.24
Savings: $2.22
Qty Add
MAGNATE 1274 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1274 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.66
Our Price: $22.42
Savings: $2.24
Qty Add
MAGNATE 717 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 1-3/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 717 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 1-3/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.33
Our Price: $23.03
Savings: $2.30
Qty Add
MAGNATE 771 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 771 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.63
Our Price: $23.30
Savings: $2.33
Qty Add
MAGNATE 723 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 15/32" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 723 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 15/32" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.96
Our Price: $23.60
Savings: $2.36
Qty Add
MAGNATE 784 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; Small diameter is about 10.24mm (0.403"); 2 Flute Carbide Tipped
MAGNATE 784 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; Small diameter is about 10.24mm (0.403"); 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.98
Our Price: $23.62
Savings: $2.36
Qty Add
MAGNATE 776 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 776 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.00
Our Price: $23.64
Savings: $2.36
Qty Add
MAGNATE 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.42
Our Price: $24.02
Savings: $2.40
Qty Add
MAGNATE 1265 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1265 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.51
Our Price: $24.10
Savings: $2.41
Qty Add
MAGNATE 726 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 726 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.70
Our Price: $24.27
Savings: $2.43
Qty Add
MAGNATE 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $27.08
Our Price: $24.62
Savings: $2.46
Qty Add
MAGNATE 1257 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1257 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $27.39
Our Price: $24.90
Savings: $2.49
Qty Add
MAGNATE 706 V-Grooving Router Bit - 90 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 706 V-Grooving Router Bit - 90 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.17
Our Price: $25.61
Savings: $2.56
Qty Add
MAGNATE 1284 Plunge Flat Roundover Router Bit - 1/4" Radius; 7/16" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1284 Plunge Flat Roundover Router Bit - 1/4" Radius; 7/16" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.24
Our Price: $25.67
Savings: $2.57
Qty Add
MAGNATE 1285 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1285 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.31
Our Price: $25.74
Savings: $2.57
Qty Add
MAGNATE 767 V-Grooving & Carving 3-Flute Router Bit - 45 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; Carbide Tipped
MAGNATE 767 V-Grooving & Carving 3-Flute Router Bit - 45 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.57
Our Price: $25.97
Savings: $2.60
Qty Add
MAGNATE 1275 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1275 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.63
Our Price: $26.03
Savings: $2.60
Qty Add
MAGNATE 1269 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1269 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.59
Our Price: $26.90
Savings: $2.69
Qty Add
MAGNATE 773 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 773 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.67
Our Price: $26.97
Savings: $2.70
Qty Add
MAGNATE 724 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 724 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.70
Our Price: $27.00
Savings: $2.70
Qty Add
MAGNATE 727 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 21/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 727 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 21/32" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.93
Our Price: $27.21
Savings: $2.72
Qty Add
MAGNATE 778 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 778 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $30.15
Our Price: $27.41
Savings: $2.74
Qty Add
MAGNATE 794 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; Comes with a Magnate MR-07 bearing at shank; Small diameter is about 10.24mm (0.403")
MAGNATE 794 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; Comes with a Magnate MR-07 bearing at shank; Small diameter is about 10.24mm (0.403")
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $30.51
Our Price: $27.74
Savings: $2.77
Qty Add
MAGNATE 1276 Plunge Flat Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1276 Plunge Flat Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.20
Our Price: $28.36
Savings: $2.84
Qty Add
MAGNATE 718 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 7/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 718 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 7/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.70
Our Price: $28.87
Qty Add
MAGNATE 707 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 707 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.60
Our Price: $29.64
Savings: $2.96
Qty Add
MAGNATE 3856 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1-1/8" Overall Diameter; 0.16" Profile Height; 3/8" Small Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3856 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1-1/8" Overall Diameter; 0.16" Profile Height; 3/8" Small Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.91
Our Price: $29.92
Savings: $2.99
Qty Add
MAGNATE 728 V-Grooving Router Bit - 120 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 11/16" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 728 V-Grooving Router Bit - 120 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 11/16" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $34.14
Our Price: $31.04
Savings: $3.10
Qty Add
MAGNATE 1278 Plunge Flat Roundover Router Bit - 1/2" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1278 Plunge Flat Roundover Router Bit - 1/2" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $34.22
Our Price: $31.11
Savings: $3.11
Qty Add
MAGNATE 779 Side V-Grooving Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-3/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 779 Side V-Grooving Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-3/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $34.32
Our Price: $31.20
Savings: $3.12
Qty Add
MAGNATE 708 V-Grooving Router Bit - 90 Degree; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 1" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 708 V-Grooving Router Bit - 90 Degree; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 1" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $37.05
Our Price: $33.68
Savings: $3.37
Qty Add
MAGNATE 751 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 751 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $38.84
Our Price: $35.31
Savings: $3.53
Qty Add
MAGNATE 753 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 753 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-1/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $41.80
Our Price: $38.00
Savings: $3.80
Qty Add
MAGNATE 3858 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1.575" Overall Diameter; 1/4" Profile Height; 1/2" Small Diameter; 9/16" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3858 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1.575" Overall Diameter; 1/4" Profile Height; 1/2" Small Diameter; 9/16" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $41.81
Our Price: $38.01
Savings: $3.80
Qty Add
MAGNATE 775 Side V-Grooving Router Bit - 90 Degree; 1" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-5/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 775 Side V-Grooving Router Bit - 90 Degree; 1" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-5/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $42.36
Our Price: $38.51
Savings: $3.85
Qty Add
MAGNATE 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.07
Our Price: $40.06
Savings: $4.01
Qty Add
MAGNATE 709 V-Grooving Router Bit - 90 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 1-1/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 709 V-Grooving Router Bit - 90 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 1-1/4" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.88
Our Price: $40.80
Savings: $4.08
Qty Add
MAGNATE 756 Side V-Grooving Extended Shank Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-3/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 756 Side V-Grooving Extended Shank Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-3/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.92
Our Price: $40.84
Savings: $4.08
Qty Add
MAGNATE 3951 Classic Spiral Router Bit - 1" Cutting Diameter; 1/2" & 3/32" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
MAGNATE 3951 Classic Spiral Router Bit - 1" Cutting Diameter; 1/2" & 3/32" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $49.32
Our Price: $44.84
Savings: $4.48
Qty Add
MAGNATE 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $54.27
Our Price: $49.34
Savings: $4.93
Qty Add
MAGNATE 3954 Classic Spiral Router Bit - 1-1/2" Cutting Diameter; 3/4" & 9/64" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
MAGNATE 3954 Classic Spiral Router Bit - 1-1/2" Cutting Diameter; 3/4" & 9/64" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $56.86
Our Price: $51.69
Savings: $5.17
Qty Add
MAGNATE 3942 Large Cove Classic Plunge Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/4", 1" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3942 Large Cove Classic Plunge Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/4", 1" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $63.60
Our Price: $57.82
Savings: $5.78
Qty Add
MAGNATE 3952 Classic Spiral Router Bit - 2" Cutting Diameter; 1" & 3/16" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
MAGNATE 3952 Classic Spiral Router Bit - 2" Cutting Diameter; 1" & 3/16" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $64.65
Our Price: $58.77
Savings: $5.88
Qty Add
MAGNATE 3953 Classic Spiral Router Bit - 3" Cutting Diameter; 1-1/2" & 9/32" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
MAGNATE 3953 Classic Spiral Router Bit - 3" Cutting Diameter; 1-1/2" & 9/32" Radius; 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $87.47
Our Price: $79.52
Savings: $7.95
Qty Add
3950, 3-Bit Classic Spiral Set - 3950
3950, 3-Bit Classic Spiral Set - 3950
3950, 3-Bit Classic Spiral Set - 3950 more info
Our Price: $155.65
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>