|
|
|
|
|
MAGNATE 3351 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/4" Shank Diameter; 1-3/4" Overall Length
MAGNATE 3351 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/4" Shank Diameter; 1-3/4" Overall Length
These arbors are designed for use with 1/4"-28 thread mortising screw-type cutters.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $6.30 Our Price: $5.73 Savings: $0.57
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3352 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/2" Shank Diameter; 1-3/4" Overall Length
MAGNATE 3352 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/2" Shank Diameter; 1-3/4" Overall Length
These arbors are designed for use with 1/4"-28 thread mortising screw-type cutters.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $6.42 Our Price: $5.84 Savings: $0.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3353 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 15/32" Thread Height; 1/2" Shank Diameter; 2-5/8" Overall Length
MAGNATE 3353 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 15/32" Thread Height; 1/2" Shank Diameter; 2-5/8" Overall Length
These arbors are designed for use with 1/4"-28 thread mortising screw-type cutters.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $7.24 Our Price: $7.41
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3354 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/2" Shank Diameter; 2-5/8" Overall Length
MAGNATE 3354 1/4"-28 Threaded Arbor for Screw Type Mortising Cutters - 1/4" Thread Height; 1/2" Shank Diameter; 2-5/8" Overall Length
These arbors are designed for use with 1/4"-28 thread mortising screw-type cutters.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $8.39 Our Price: $7.63 Savings: $0.76
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3340 1/4"-28 Thread Screw Type Mortising Cutter - 1/2" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.25 Our Price: $10.23 Savings: $1.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3370 5/16"-24 Thread Screw Type Mortising Cutter - 1/2" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.25 Our Price: $10.23 Savings: $1.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3301 Mortising Router Bit - 1/2" Cutting Diameter; 13/32" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.92 Our Price: $10.84 Savings: $1.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3341 1/4"-28 Thread Screw Type Mortising Cutter - 5/8" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.97 Our Price: $10.88 Savings: $1.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3371 5/16"-24 Thread Screw Type Mortising Cutter - 5/8" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.97 Our Price: $10.88 Savings: $1.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3343 1/4"-28 Thread Screw Type Mortising Cutter - 3/4" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.69 Our Price: $11.54 Savings: $1.15
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3373 5/16"-24 Thread Screw Type Mortising Cutter - 3/4" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.69 Our Price: $11.54 Savings: $1.15
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3311 Mortising Router Bit - 1/2" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.94 Our Price: $11.76 Savings: $1.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3302 Mortising Router Bit - 5/8" Cutting Diameter; 9/16" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.42 Our Price: $12.20 Savings: $1.22
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3344 1/4"-28 Thread Screw Type Mortising Cutter - 13/16" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.50 Our Price: $12.27 Savings: $1.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3374 5/16"-24 Thread Screw Type Mortising Cutter - 13/16" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.50 Our Price: $12.27 Savings: $1.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3345 1/4"-28 Thread Screw Type Mortising Cutter - 7/8" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.19 Our Price: $12.90 Savings: $1.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3375 5/16"-24 Thread Screw Type Mortising Cutter - 7/8" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.19 Our Price: $12.90 Savings: $1.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3312 Mortising Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.76 Our Price: $13.42 Savings: $1.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3303 Mortising Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.93 Our Price: $13.57 Savings: $1.36
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3347 1/4"-28 Thread Screw Type Mortising Cutter - 1" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.96 Our Price: $13.60 Savings: $1.36
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3346 1/4"-28 Thread Screw Type Mortising Cutter - 15/16" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.05 Our Price: $13.68 Savings: $1.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3376 5/16"-24 Thread Screw Type Mortising Cutter - 15/16" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.05 Our Price: $13.68 Savings: $1.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3377 5/16"-24 Thread Screw Type Mortising Cutter - 1" Cutting Diameter; 17/32" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.20 Our Price: $13.82 Savings: $1.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3348 1/4"-28 Thread Screw Type Mortising Cutter - 1-1/8" Cutting Diameter; 9/16" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.43 Our Price: $14.03 Savings: $1.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3378 5/16"-24 Thread Screw Type Mortising Cutter - 1-1/8" Cutting Diameter; 9/16" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.43 Our Price: $14.03 Savings: $1.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3349 1/4"-28 Thread Screw Type Mortising Cutter - 1-1/4" Cutting Diameter; 5/8" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.86 Our Price: $14.42 Savings: $1.44
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3379 5/16"-24 Thread Screw Type Mortising Cutter - 1-1/4" Cutting Diameter; 5/8" Cutting Height; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.92 Our Price: $14.47 Savings: $1.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3305 Mortising Router Bit - 1-1/4" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.93 Our Price: $14.48 Savings: $1.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3304 Mortising Router Bit - 1" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.35 Our Price: $14.86 Savings: $1.49
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3315 Mortising Router Bit - 1-1/4" Cutting Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.45 Our Price: $15.86 Savings: $1.59
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3306 Mortising Router Bit - 1-1/4" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.47 Our Price: $17.70 Savings: $1.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 3316 Mortising Router Bit - 1-1/4" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.07 Our Price: $19.15 Savings: $1.92
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
|
|
