Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Raised Panel
We found 54 results matching your criteria.
Raised Panel Router Bit, 5 Degree Face-Cut 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round 2-Flute Horizontal, Carbide Tipped

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info
Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round with Under Cutter 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, 15 Degree Face Cut 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, 15 Degree Face-Cut with Under Cutter 2-Flute Horizontal, Carbide Tipped

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info
Raised Panel Router Bit, 18 Degree Face-Cut 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, 25 Degree Face Cut 2-Flute Horizontal, Carbide Tipped

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info
Raised Panel Groove, 25 Degree Face-Cut Router Bit 2-Flute Carbide Tipped Raised Panel Router Bit, Ogee 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, Ogee with Under Cutter 2-Flute Horizontal, Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info
Raised Panel Router Bit, Convex 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, Convex with Under Cutter 2-Flute Horizontal, Carbide Tipped Raised Panel Router Bit, Classical 2-Flute Horizontal, Carbide Tipped

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info

2-Flute Horizontal, Carbide Tipped more info
Raised Panel Router Bit, Classical with Under Cutter 2-Flute Horizontal, Carbide Tipped Raised Panel Under Cutter Router Bit 2-Flute Carbide Tipped Raised Panel Router Bit, Vertical 5 Degree Face-Cut 2-Flute Carbide Tipped

2-Flute Horizontal, Carbide Tipped more info

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Raised Panel Router Bit, Vertical 12 Degree Face-Cut With Quarter Round 2-Flute Carbide Tipped Raised Panel Router Bit, Vertical 15 Degree Face-Cut 2-Flute Carbide Tipped Raised Panel Router Bit, Vertical 18 Degree Face-Cut 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Raised Panel Router Bit, Vertical Ogee 2-Flute Carbide Tipped Raised Panel Router Bit, Vertical Convex 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $27.08
Our Price: $24.62
Savings: $2.46
Qty Add
MAGNATE 3802 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3802 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3802 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $29.98
Our Price: $27.25
Savings: $2.73
Qty Add
MAGNATE 3801 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3801 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3801 Raised Panel Router Bit, 25 Degree Face Cut - 9/16" Reveal ; 1-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $30.37
Our Price: $27.61
Savings: $2.76
Qty Add
MAGNATE 3837 Raised Panel Router Bit, Convex - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3837 Raised Panel Router Bit, Convex - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3837 Raised Panel Router Bit, Convex - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $32.52
Our Price: $29.56
Savings: $2.96
Qty Add
MAGNATE 3835 Raised Panel Router Bit, Ogee - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3835 Raised Panel Router Bit, Ogee - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3835 Raised Panel Router Bit, Ogee - 5/8" Reveal ; 1-3/4" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $32.64
Our Price: $29.67
Savings: $2.97
Qty Add
MAGNATE 3856 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1-1/8" Overall Diameter; 0.16" Profile Height; 3/8" Small Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3856 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1-1/8" Overall Diameter; 0.16" Profile Height; 3/8" Small Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.91
Our Price: $29.92
Savings: $2.99
Qty Add
MAGNATE 3800 Raised Panel Under Cutter Router Bit - 5/8" Reveal ; 1-3/4" Overall Diameter; 3/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3800 Raised Panel Under Cutter Router Bit - 5/8" Reveal ; 1-3/4" Overall Diameter; 3/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.92
Our Price: $30.84
Savings: $3.08
Qty Add
MAGNATE 3823 Raised Panel Router Bit, 5 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3823 Raised Panel Router Bit, 5 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3823 Raised Panel Router Bit, 5 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $37.85
Our Price: $34.41
Savings: $3.44
Qty Add
MAGNATE 3824 Raised Panel Router Bit, 15 Degree Face Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3824 Raised Panel Router Bit, 15 Degree Face Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $38.03
Our Price: $34.57
Savings: $3.46
Qty Add
MAGNATE 3829 Raised Panel Router Bit, 18 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3829 Raised Panel Router Bit, 18 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3829 Raised Panel Router Bit, 18 Degree Face-Cut - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $38.19
Our Price: $34.72
Savings: $3.47
Qty Add
MAGNATE 3827 Raised Panel Router Bit, Convex - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3827 Raised Panel Router Bit, Convex - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3827 Raised Panel Router Bit, Convex - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $38.39
Our Price: $34.90
Savings: $3.49
Qty Add
MAGNATE 3825 Raised Panel Router Bit, Ogee - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3825 Raised Panel Router Bit, Ogee - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3825 Raised Panel Router Bit, Ogee - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $38.56
Our Price: $35.05
Savings: $3.51
Qty Add
MAGNATE 3826 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3826 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 3/4" Reveal ; 2" Overall Diameter; 1/4" Shank Diameter; 3/32" Radius; 1-1/4" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $38.68
Our Price: $35.16
Savings: $3.52
Qty Add
MAGNATE 3815 Raised Panel Router Bit, Vertical Ogee - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3815 Raised Panel Router Bit, Vertical Ogee - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3815 Raised Panel Router Bit, Vertical Ogee - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $40.34
Our Price: $36.67
Savings: $3.67
Qty Add
MAGNATE 3813 Raised Panel Router Bit, Vertical 5 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3813 Raised Panel Router Bit, Vertical 5 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3813 Raised Panel Router Bit, Vertical 5 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $41.04
Our Price: $37.31
Savings: $3.73
Qty Add
MAGNATE 3814 Raised Panel Router Bit, Vertical 15 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3814 Raised Panel Router Bit, Vertical 15 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3814 Raised Panel Router Bit, Vertical 15 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $41.18
Our Price: $37.44
Savings: $3.74
Qty Add
MAGNATE 3819 Raised Panel Router Bit, Vertical 18 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3819 Raised Panel Router Bit, Vertical 18 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3819 Raised Panel Router Bit, Vertical 18 Degree Face-Cut - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $41.53
Our Price: $37.75
Savings: $3.78
Qty Add
MAGNATE 3817 Raised Panel Router Bit, Vertical Convex - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3817 Raised Panel Router Bit, Vertical Convex - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3817 Raised Panel Router Bit, Vertical Convex - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $41.62
Our Price: $37.84
Savings: $3.78
Qty Add
MAGNATE 3858 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1.575" Overall Diameter; 1/4" Profile Height; 1/2" Small Diameter; 9/16" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
MAGNATE 3858 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1.575" Overall Diameter; 1/4" Profile Height; 1/2" Small Diameter; 9/16" Cutting Height; 1/2" Shank Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $41.81
Our Price: $38.01
Savings: $3.80
Qty Add
MAGNATE 3816 Raised Panel Router Bit, Vertical 12 Degree Face-Cut With Quarter Round - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3816 Raised Panel Router Bit, Vertical 12 Degree Face-Cut With Quarter Round - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 3816 Raised Panel Router Bit, Vertical 12 Degree Face-Cut With Quarter Round - 1-5/8" Cutting Height; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $42.57
Our Price: $38.70
Savings: $3.87
Qty Add
MAGNATE 3892 Raised Panel Router Bit, 25 Degree Face Cut - 1" Reveal ; 2-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3892 Raised Panel Router Bit, 25 Degree Face Cut - 1" Reveal ; 2-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3892 Raised Panel Router Bit, 25 Degree Face Cut - 1" Reveal ; 2-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $43.26
Our Price: $39.33
Savings: $3.93
Qty Add
MAGNATE 3803 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3803 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3803 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $44.69
Our Price: $40.63
Savings: $4.06
Qty Add
MAGNATE 3804 Raised Panel Router Bit, 15 Degree Face Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3804 Raised Panel Router Bit, 15 Degree Face Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.85
Our Price: $40.77
Savings: $4.08
Qty Add
MAGNATE 3809 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $45.00
Our Price: $40.91
Savings: $4.09
Qty Add
MAGNATE 3807 Raised Panel Router Bit, Convex - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807 Raised Panel Router Bit, Convex - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807 Raised Panel Router Bit, Convex - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $45.16
Our Price: $41.05
Savings: $4.11
Qty Add
MAGNATE 3805 Raised Panel Router Bit, Ogee - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805 Raised Panel Router Bit, Ogee - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805 Raised Panel Router Bit, Ogee - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $45.31
Our Price: $41.19
Savings: $4.12
Qty Add
MAGNATE 3806 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3806 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $45.45
Our Price: $41.32
Savings: $4.13
Qty Add
MAGNATE 3808 Raised Panel Router Bit, Classical - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3808 Raised Panel Router Bit, Classical - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3808 Raised Panel Router Bit, Classical - 1-1/16" Reveal ; 2-5/8" Overall Diameter; 1/2" Shank Diameter; 1-1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $45.63
Our Price: $41.48
Savings: $4.15
Qty Add
MAGNATE 3894 Raised Panel Router Bit, 25 Degree Face Cut - 1-7/32" Reveal ; 2-31/32" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3894 Raised Panel Router Bit, 25 Degree Face Cut - 1-7/32" Reveal ; 2-31/32" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3894 Raised Panel Router Bit, 25 Degree Face Cut - 1-7/32" Reveal ; 2-31/32" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; BR-03 Bearing; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $54.13
Our Price: $49.21
Savings: $4.92
Qty Add
MAGNATE 3843 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3843 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3843 Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $56.50
Our Price: $51.36
Savings: $5.14
Qty Add
MAGNATE 3844 Raised Panel Router Bit, 15 Degree Face Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3844 Raised Panel Router Bit, 15 Degree Face Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $56.67
Our Price: $51.52
Savings: $5.15
Qty Add
MAGNATE 3849 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3849 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3849 Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $56.83
Our Price: $51.66
Savings: $5.17
Qty Add
MAGNATE 3847 Raised Panel Router Bit, Convex - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3847 Raised Panel Router Bit, Convex - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3847 Raised Panel Router Bit, Convex - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $56.99
Our Price: $51.81
Savings: $5.18
Qty Add
MAGNATE 3845 Raised Panel Router Bit, Ogee - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3845 Raised Panel Router Bit, Ogee - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3845 Raised Panel Router Bit, Ogee - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $57.20
Our Price: $52.00
Savings: $5.20
Qty Add
MAGNATE 3846 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3846 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/4" Reveal ; 3" Overall Diameter; 1/2" Shank Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $57.37
Our Price: $52.15
Savings: $5.22
Qty Add
MAGNATE 3863 Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 3/32" Radius; BR-40 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped
MAGNATE 3863 Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 3/32" Radius; BR-40 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped
MAGNATE 3863 Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 3/32" Radius; BR-40 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $60.83
Our Price: $55.30
Savings: $5.53
Qty Add
MAGNATE 3864 Raised Panel Router Bit, 15 Degree Face-Cut with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3864 Raised Panel Router Bit, 15 Degree Face-Cut with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $61.09
Our Price: $55.54
Savings: $5.55
Qty Add
MAGNATE 3869 Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3869 Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3869 Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $61.36
Our Price: $55.78
Savings: $5.58
Qty Add
MAGNATE 3867 Raised Panel Router Bit, Convex with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3867 Raised Panel Router Bit, Convex with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3867 Raised Panel Router Bit, Convex with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $61.51
Our Price: $55.92
Savings: $5.59
Qty Add
MAGNATE 3868 Raised Panel Router Bit, Classical with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3868 Raised Panel Router Bit, Classical with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3868 Raised Panel Router Bit, Classical with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $61.67
Our Price: $56.06
Savings: $5.61
Qty Add
MAGNATE 3865 Raised Panel Router Bit, Ogee with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3865 Raised Panel Router Bit, Ogee with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3865 Raised Panel Router Bit, Ogee with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $61.73
Our Price: $56.12
Savings: $5.61
Qty Add
MAGNATE 3866 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3866 Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round with Under Cutter - 15/16" Reveal ; 2-5/8" Overall Diameter; 1/8" Radius; BR-40 Bearing; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $61.86
Our Price: $56.24
Savings: $5.62
Qty Add
MAGNATE 3806B Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3806B Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 5/32" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $68.96
Our Price: $62.69
Savings: $6.27
Qty Add
MAGNATE 3803B Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3803B Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3803B Raised Panel Router Bit, 5 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $69.22
Our Price: $62.93
Savings: $6.29
Qty Add
MAGNATE 3804B Raised Panel Router Bit, 15 Degree Face Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3804B Raised Panel Router Bit, 15 Degree Face Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.45
Our Price: $63.14
Savings: $6.31
Qty Add
MAGNATE 3809B Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809B Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809B Raised Panel Router Bit, 18 Degree Face-Cut - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $69.56
Our Price: $63.24
Savings: $6.32
Qty Add
MAGNATE 3807B Raised Panel Router Bit, Convex - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807B Raised Panel Router Bit, Convex - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807B Raised Panel Router Bit, Convex - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $69.88
Our Price: $63.53
Savings: $6.35
Qty Add
MAGNATE 3805B Raised Panel Router Bit, Ogee - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805B Raised Panel Router Bit, Ogee - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805B Raised Panel Router Bit, Ogee - 1-1/2" Reveal ; 3-1/2" Overall Diameter; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Horizontal, Carbide Tipped

Comes with a Magnate BR-03 bearing.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $70.11
Our Price: $63.74
Savings: $6.37
Qty Add
MAGNATE 3803C Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped
MAGNATE 3803C Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped
MAGNATE 3803C Raised Panel Router Bit, 5 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, 1/2" Shank Diameter, 1-1/2" Shank Length Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $83.11
Our Price: $75.55
Savings: $7.56
Qty Add
MAGNATE 3804C Raised Panel Router Bit, 15 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3804C Raised Panel Router Bit, 15 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $83.35
Our Price: $75.77
Savings: $7.58
Qty Add
MAGNATE 3809C Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809C Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3809C Raised Panel Router Bit, 18 Degree Face-Cut with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 1/8" Radius; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $83.59
Our Price: $75.99
Savings: $7.60
Qty Add
MAGNATE 3807C Raised Panel Router Bit, Convex with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807C Raised Panel Router Bit, Convex with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3807C Raised Panel Router Bit, Convex with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $83.82
Our Price: $76.20
Savings: $7.62
Qty Add
MAGNATE 3805C Raised Panel Router Bit, Ogee with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805C Raised Panel Router Bit, Ogee with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3805C Raised Panel Router Bit, Ogee with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped

This raised panel bit with undercutter is designed for 3/4" or 7/8" stock and leaves a 1/4" wide x 1/4" depth tongue.

Please note: Product images are for illustrative purposes and may vary from the actual item.

A carbide-tipped router bit delivers precision, durability, and smooth cutting performance for professional woodworking. Built with premium carbide edges on high-carbon steel body heat-treated as needed. it provides strength, clean cuts, and efficient chip removal when working with wood, plywood, and composites. Although designed primarily for woodworking, it can also cut non-ferrous metals such as aluminum, brass, and copper when used at reduced speeds with proper lubrication. However, dedicated end mills are recommended for regular metalworking applications. For optimal results, select the shortest bit length that meets your project needs to minimize vibration, and always secure the workpiece to ensure safety and protect both the tool and the material. more info
List Price: $84.05
Our Price: $76.41
Savings: $7.64
Qty Add
MAGNATE 3806C Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 5/32" Radius; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
MAGNATE 3806C Raised Panel Router Bit, 12 Degree Face-Cut with Quarter Round with Under Cutter - 1-3/8" Reveal ; 3-1/2" Overall Diameter; 5/32" Radius; BR-05 Bearing; 2-Flute Horizontal, Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $84.23
Our Price: $76.57
Savings: $7.66
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>