|
|
|
|
|
MAGNATE 2421 Shallow Flute Router Bit - 5/16" Flute Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.73 Our Price: $15.21 Savings: $1.52
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2401 Shallow Flute Router Bit - 5/16" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.55 Our Price: $15.95 Savings: $1.60
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2422 Shallow Flute Router Bit - 3/8" Flute Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $18.22 Our Price: $16.56 Savings: $1.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2402 Shallow Flute Router Bit - 3/8" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.14 Our Price: $17.40 Savings: $1.74
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2423 Shallow Flute Router Bit - 1/2" Flute Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.32 Our Price: $17.56 Savings: $1.76
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2403 Shallow Flute Router Bit - 1/2" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.60 Our Price: $18.73 Savings: $1.87
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6011F Boat Planking Router Bit - Flute Profile; 1/8" Radius; 1/4" Shank Diameter; 1/4" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.24 Our Price: $19.31 Savings: $1.93
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6023 Flute Cutter with Top Bearing - 1/8" Radius; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.33 Our Price: $19.39 Savings: $1.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6001 Flute Cutting Router Bit with Top and Bottom Bearings - 1/8" Radius; 1/8" Cutting Depth; 1/4" Shank Diameter; 1-1/2" Shank Length; 1/4" Cutting Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.23 Our Price: $20.21 Savings: $2.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6011B Boat Planking Router Bit - Bead Profile; 1/8" Radius; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.40 Our Price: $20.36 Savings: $2.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6013F Boat Planking Router Bit - Flute Profile; 5/32" Radius; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.62 Our Price: $20.56 Savings: $2.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6013B Boat Planking Router Bit - Bead Profile; 5/32" Radius; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $23.68 Our Price: $21.53 Savings: $2.15
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6012F Boat Planking Router Bit - Flute Profile; 3/16" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $23.76 Our Price: $21.60 Savings: $2.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2424 Shallow Flute Router Bit - 5/8" Flute Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 15/16" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $24.17 Our Price: $21.97 Savings: $2.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6012B Boat Planking Router Bit - Bead Profile; 3/16" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/2" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $24.54 Our Price: $22.31 Savings: $2.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2404 Shallow Flute Router Bit - 5/8" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 15/16" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $25.00 Our Price: $22.73 Savings: $2.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6002 Flute Cutting Router Bit with Top and Bottom Bearings - 3/16" Radius; 3/16" Cutting Depth; 1/4" Shank Diameter; 1-1/2" Shank Length; 3/8" Cutting Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $25.33 Our Price: $23.03 Savings: $2.30
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2425 Shallow Flute Router Bit - 3/4" Flute Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 1" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $25.88 Our Price: $23.53 Savings: $2.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2405 Shallow Flute Router Bit - 3/4" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $26.71 Our Price: $24.28 Savings: $2.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6003 Flute Cutting Router Bit with Top and Bottom Bearings - 1/4" Radius; 1/4" Cutting Depth; 1/4" Shank Diameter; 1-3/4" Shank Length; 1/2" Cutting Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $27.98 Our Price: $25.44 Savings: $2.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2406 Shallow Flute Router Bit - 7/8" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $30.25 Our Price: $27.50 Savings: $2.75
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6004 Flute Cutting Router Bit with Top and Bottom Bearings - 5/16" Radius; 5/16" Cutting Depth; 1/4" Shank Diameter; 1-3/4" Shank Length; 5/8" Cutting Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $31.49 Our Price: $28.63 Savings: $2.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2407 Shallow Flute Router Bit - 1" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $31.78 Our Price: $28.89 Savings: $2.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2408 Shallow Flute Router Bit - 1-1/8" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $35.05 Our Price: $31.86 Savings: $3.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6005 Flute Cutting Router Bit with Top and Bottom Bearings - 3/8" Radius; 3/8" Cutting Depth; 1/4" Shank Diameter; 1-3/4" Shank Length; 3/4" Cutting Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $35.77 Our Price: $32.52 Savings: $3.25
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2409 Shallow Flute Router Bit - 1-1/4" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $36.34 Our Price: $33.04 Savings: $3.30
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6041 Multi-Fluting Router Bit - 1/8" Radius; 1" Cutting Length; 1/4" Shank Diameter; 7/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $36.49 Our Price: $33.17 Savings: $3.32
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6045 Multi-Fluting Router Bit - 3/32" Radius; 11/16" Cutting Length; 1/2" Shank Diameter; 13/16" Overall Diameter; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $37.00 Our Price: $33.64 Savings: $3.36
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6042 Multi-Fluting Router Bit - 1/8" Radius; 1" Cutting Length; 1/2" Shank Diameter; 7/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $38.02 Our Price: $34.56 Savings: $3.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2410 Shallow Flute Router Bit - 1-1/2" Flute Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $41.51 Our Price: $37.74 Savings: $3.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2451 Shallow Flute Extended Shank Router Bit - 1/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 13/16" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $41.86 Our Price: $38.05 Savings: $3.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6053 Fluting Extended Shank Router Bit - 3/16" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 3/32" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $44.63 Our Price: $40.57 Savings: $4.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2453 Shallow Flute Extended Shank Router Bit - 3/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $44.69 Our Price: $40.63 Savings: $4.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6051 Fluting Extended Shank Router Bit - 1/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1/8" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $47.73 Our Price: $43.39 Savings: $4.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2455 Shallow Flute Extended Shank Router Bit - 1/2" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $50.49 Our Price: $45.90 Savings: $4.59
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6054 Fluting Extended Shank Router Bit - 3/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 3/16" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $53.48 Our Price: $48.62 Savings: $4.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2456 Shallow Flute Extended Shank Router Bit - 5/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 15/16" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $56.25 Our Price: $51.14 Savings: $5.11
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6052 Fluting Extended Shank Router Bit - 1/2" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1/4" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $59.22 Our Price: $53.84 Savings: $5.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2457 Shallow Flute Extended Shank Router Bit - 3/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $62.80 Our Price: $57.09 Savings: $5.71
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6056 Fluting Extended Shank Router Bit - 5/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 5/16" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $65.63 Our Price: $59.66 Savings: $5.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2459 Shallow Flute Extended Shank Router Bit - 1" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1" Overall Diameter; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $66.86 Our Price: $60.78 Savings: $6.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 6058 Fluting Extended Shank Router Bit - 3/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 3/8" Radius; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $71.35 Our Price: $64.86 Savings: $6.49
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
|
|
