|
|
|
|
|
MAGNATE 101 Straight 1-Flute Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.03 Our Price: $8.21 Savings: $0.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 102 Straight 1-Flute Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.09 Our Price: $8.26 Savings: $0.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 103 Straight 1-Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.12 Our Price: $8.29 Savings: $0.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 104 Straight 1-Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.21 Our Price: $8.37 Savings: $0.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 201U Straight 1/4" Shank Diameter Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.79 Our Price: $8.90 Savings: $0.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 123 Straight 1-Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $9.80 Our Price: $8.91 Savings: $0.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 201R Straight 1/4" Shank Diameter Router Bit - 15/64" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.13 Our Price: $9.21 Savings: $0.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 201 Straight 1/4" Shank Diameter Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.21 Our Price: $9.28 Savings: $0.93
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 124 Straight 1-Flute Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.21 Our Price: $9.28 Savings: $0.93
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 201L Straight 1/4" Shank Diameter Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.25 Our Price: $9.32 Savings: $0.93
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 201D Straight 1/4" Shank Diameter Router Bit - 9/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.30 Our Price: $9.36 Savings: $0.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 202 Straight 1/4" Shank Diameter Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.34 Our Price: $9.40 Savings: $0.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 203 Straight 1/4" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.41 Our Price: $9.46 Savings: $0.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 204 Straight 1/4" Shank Diameter Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.44 Our Price: $9.49 Savings: $0.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 231U Straight 1/2" Shank Diameter Router Bit - 7/32" Cutting Diameter; 1/2" Cutting Length; 1-1/2" Shank Length; 2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.51 Our Price: $9.55 Savings: $0.96
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 205U Straight 1/4" Shank Diameter Router Bit - 31/64" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.54 Our Price: $9.58 Savings: $0.96
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 231 Straight 1/2" Shank Diameter Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1-1/2" Shank Length; 2-1/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.57 Our Price: $9.61 Savings: $0.96
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 205 Straight 1/4" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.59 Our Price: $9.63 Savings: $0.96
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 205D Straight 1/4" Shank Diameter Router Bit - 17/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.66 Our Price: $9.69 Savings: $0.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 206 Straight 1/4" Shank Diameter Router Bit - 9/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.74 Our Price: $9.76 Savings: $0.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 125 Straight 1-Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.88 Our Price: $9.89 Savings: $0.99
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 223 Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Length; 1-3/4" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.90 Our Price: $9.91 Savings: $0.99
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 212 Straight Metric Shank Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 8mm Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $10.98 Our Price: $9.98 Savings: $1.00
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 232 Straight 1/2" Shank Diameter Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.35 Our Price: $10.32 Savings: $1.03
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 234A Straight 1/2" Shank Diameter Router Bit - 7/16" Cutting Diameter; 3/4" Cutting Length; 1-1/2" Shank Length; 2-1/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.36 Our Price: $10.33 Savings: $1.03
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 233 Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.41 Our Price: $10.37 Savings: $1.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 234 Straight 1/2" Shank Diameter Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.41 Our Price: $10.37 Savings: $1.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 261 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.46 Our Price: $10.42 Savings: $1.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 208R Straight 1/4" Shank Diameter Router Bit - 11/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.46 Our Price: $10.42 Savings: $1.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 207 Straight 1/4" Shank Diameter Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.54 Our Price: $10.49 Savings: $1.05
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 262 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.57 Our Price: $10.52 Savings: $1.05
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 126 Straight 1-Flute Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.59 Our Price: $10.54 Savings: $1.05
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 253 Straight Plunge Left-Hand Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 234D Straight 1/2" Shank Diameter Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.07 Our Price: $10.97 Savings: $1.10
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 263 Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.33 Our Price: $11.21 Savings: $1.12
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 281 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.36 Our Price: $11.24 Savings: $1.12
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 208 Straight 1/4" Shank Diameter Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.46 Our Price: $11.33 Savings: $1.13
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235 Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.47 Our Price: $11.34 Savings: $1.13
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 265 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.56 Our Price: $11.42 Savings: $1.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 282 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.56 Our Price: $11.42 Savings: $1.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 208U Straight 1/4" Shank Diameter Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.85 Our Price: $11.68 Savings: $1.17
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 267 Straight Plunge Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.89 Our Price: $11.72 Savings: $1.17
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 245 Straight 1/2" Shank Diameter Router Bit - 13/32" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.91 Our Price: $11.74 Savings: $1.17
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 283 Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.17 Our Price: $11.97 Savings: $1.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235U Straight 1/2" Shank Diameter Router Bit - 31/64" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.20 Our Price: $12.00 Savings: $1.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 236 Straight 1/2" Shank Diameter Router Bit - 9/16" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.74 Our Price: $12.49 Savings: $1.25
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 284 Straight Plunge Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.94 Our Price: $12.67 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 178 Straight 5 Degree Tapered Router Bit - 3/8" Cutting Diameter; 5/16" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Compatible with Castle Pocket Machine, 2-Flute Carbide Tipped, Non-Plunging
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.95 Our Price: $12.68 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 209R Straight 1/4" Shank Diameter Router Bit - 13/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.97 Our Price: $12.70 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 268 Straight Plunge Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.01 Our Price: $12.74 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237K Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.01 Our Price: $12.74 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 127 Straight 1-Flute Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.64 Our Price: $13.31 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235A Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.64 Our Price: $13.31 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 236U Straight 1/2" Shank Diameter Router Bit - 17/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.65 Our Price: $13.32 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 209 Straight 1/4" Shank Diameter Router Bit - 7/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.73 Our Price: $13.39 Savings: $1.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 284D Straight Plunge Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.74 Our Price: $13.40 Savings: $1.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 284A Straight Plunge Router Bit - 12mm Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.76 Our Price: $13.42 Savings: $1.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 285 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.09 Our Price: $13.72 Savings: $1.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 233L Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 2" Shank Length; 3-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.09 Our Price: $13.72 Savings: $1.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 287K Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.16 Our Price: $13.78 Savings: $1.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237U Straight 1/2" Shank Diameter Router Bit - 19/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.38 Our Price: $13.98 Savings: $1.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 210 Straight 1/4" Shank Diameter Router Bit - 1" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.50 Our Price: $14.09 Savings: $1.41
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235L Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1-1/2" Shank Length; 3" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.69 Our Price: $14.26 Savings: $1.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237D Straight 1/2" Shank Diameter Router Bit - 21/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.20 Our Price: $14.73 Savings: $1.47
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237 Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.26 Our Price: $14.78 Savings: $1.48
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 128 Straight 1-Flute Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.56 Our Price: $15.05 Savings: $1.51
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 238R Straight 1/2" Shank Diameter Router Bit - 11/16" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.78 Our Price: $15.25 Savings: $1.53
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 269 Straight Plunge Router Bit - 7/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.85 Our Price: $15.32 Savings: $1.53
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237A Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1-1/2" Cutting Length; 1-1/2" Shank Length; 3" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.06 Our Price: $15.51 Savings: $1.55
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 238U Straight 1/2" Shank Diameter Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.25 Our Price: $15.68 Savings: $1.57
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 285L Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.53 Our Price: $15.94 Savings: $1.59
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 238 Straight 1/2" Shank Diameter Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.73 Our Price: $16.12 Savings: $1.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 270 Straight Plunge Router Bit - 1" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.89 Our Price: $16.26 Savings: $1.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 288U Straight Plunge Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $18.98 Our Price: $17.25 Savings: $1.73
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 238D Straight 1/2" Shank Diameter Router Bit - 25/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.04 Our Price: $17.31 Savings: $1.73
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235B Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 2" Shank Length; 4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.37 Our Price: $17.61 Savings: $1.76
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 239R Straight 1/2" Shank Diameter Router Bit - 13/16" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.60 Our Price: $17.82 Savings: $1.78
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 288 Straight Plunge Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.65 Our Price: $17.86 Savings: $1.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 285B Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.67 Our Price: $17.88 Savings: $1.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2700 Surface Planing (Bottom Cleaning) Router Bit - 3/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.98 Our Price: $18.16 Savings: $1.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 239A Straight 1/2" Shank Diameter Router Bit - 27/32" Cutting Diameter; 1" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.00 Our Price: $18.18 Savings: $1.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 239B Straight 1/2" Shank Diameter Router Bit - 27/32" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.06 Our Price: $18.24 Savings: $1.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 237L Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 2" Cutting Length; 1-1/2" Shank Length; 3-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.10 Our Price: $18.27 Savings: $1.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 239 Straight 1/2" Shank Diameter Router Bit - 7/8" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.37 Our Price: $18.52 Savings: $1.85
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2701 Surface Planing (Bottom Cleaning) Router Bit - 3/4" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.42 Our Price: $18.56 Savings: $1.86
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 238B Straight 1/2" Shank Diameter Router Bit - 3/4" Cutting Diameter; 2" Cutting Length; 1-1/2" Shank Length; 3-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.78 Our Price: $18.89 Savings: $1.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 240 Straight 1/2" Shank Diameter Router Bit - 1" Cutting Diameter; 1-1/4" Cutting Length; 1-1/2" Shank Length; 2-3/4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.91 Our Price: $19.92 Savings: $1.99
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 289 Straight Plunge Router Bit - 7/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.91 Our Price: $19.92 Savings: $1.99
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 151 Straight 3/4" Shank Diameter Router Bit - Right Rotation; 3/4" Cutting Diameter; 1-1/4" Cutting Length; 3-1/4" Overall Length; 3/4" Shank Diameter; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $21.96 Our Price: $19.96 Savings: $2.00
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 235C Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 2-1/2" Cutting Length; 2" Shank Length; 4-1/2" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.06 Our Price: $20.05 Savings: $2.01
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2712 Surface Planing (Bottom Cleaning) Router Bit - 7/8" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.74 Our Price: $20.67 Savings: $2.07
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2702 Surface Planing (Bottom Cleaning) Router Bit - 7/8" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $22.90 Our Price: $20.82 Savings: $2.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 295 Straight Plunge Router Bit - 5/8" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $23.29 Our Price: $21.17 Savings: $2.12
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 290 Straight Plunge Router Bit - 1" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $23.44 Our Price: $21.31 Savings: $2.13
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 241 Straight 1/2" Shank Diameter Router Bit - 1" Cutting Diameter; 2" Cutting Length; 2" Shank Length; 4" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $24.88 Our Price: $22.62 Savings: $2.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
MAGNATE 242 Straight 1/2" Shank Diameter Router Bit - 1-1/4" Cutting Diameter; 1-1/2" Cutting Length; 1-1/2" Shank Length; 3" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $25.63 Our Price: $23.30 Savings: $2.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2713 Surface Planing (Bottom Cleaning) Router Bit - 1" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $25.99 Our Price: $23.63 Savings: $2.36
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 244 Straight 1/2" Shank Diameter Router Bit - 1-1/8" Cutting Diameter; 1-1/2" Cutting Length; 1-1/2" Shank Length; 3" Overall Length; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $26.04 Our Price: $23.67 Savings: $2.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 2703 Surface Planing (Bottom Cleaning) Router Bit - 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $26.20 Our Price: $23.82 Savings: $2.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 152 Straight 3/4" Shank Diameter Router Bit - Right Rotation; 3/4" Cutting Diameter; 2" Cutting Length; 4" Overall Length; 3/4" Shank Diameter; 2-Flute Carbide Tipped, Non-Plunging
Straight router bits are among the most widely used tools in woodworking, ideal for tasks like edge planing and cutting rabbets, dadoes, grooves, or slots.
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $27.41 Our Price: $24.92 Savings: $2.49
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
|
|
