Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 64-1/2" Long > Bi-metal Bandsaw Blade, 64-1/2" Long
We found 16 results matching your criteria.


Sort By:
Page of 1
Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.72
Our Price: $34.29
Savings: $3.43
Qty Add
Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $37.73
Our Price: $34.30
Savings: $3.43
Qty Add
Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $39.22
Our Price: $35.65
Savings: $3.57
Qty Add
Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $39.22
Our Price: $35.65
Savings: $3.57
Qty Add
Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $39.22
Our Price: $35.65
Savings: $3.57
Qty Add
Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $39.41
Our Price: $35.83
Savings: $3.58
Qty Add
Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long
Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U more info
List Price: $39.41
Our Price: $35.83
Savings: $3.58
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 64-1/2 inch ( 5 ft. 4-1/2 inch, 5' 4-1/2" ) long bandsaw blades.

Grizzly G9742; G1010, G0622; Northern Industrial H/V 4-1/2” Metal; ENCO 137-3150; ENCO 505-6840 (Model RF-128DR, RF-128HDR, RF-128DR-1, RF-128HDR-1); Jet HVBS-56M, HBS-565 5x6, HVBS-461, HVBS-462, HVBS-463, 3-Speed Horizontal/Vertical; Ohio Forge 510-505; Enco 137-3150, 137-3151, 505-6840; Central Machinery 591-3CEA; MIT 5120; Shopcraft T7070; Turn Pro; Delta 20-330; Dayton 3Z360;  Rigid 945; Greenlee 1357; Springer BS-45;  Speeder SBS-115;  Powercraft; Nu-Mark®; Wilton Import; Shopmaster Emerson: 10-1455, 10-1451; Wells 57; Greenley; Powerline; American Industrial;