www.magnate.net

Shop Online

Home > Bandsaw Blades > Carbon Steel Blades - Wood or Metal Cutting > Carbon Steel Bandsaw Blade, 70" Long

We found 33 results matching your criteria.

Sort By:

Page of 1

Magnate M70C14H4 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14H4 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14H4 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14H6 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14H6 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14H6 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14R10 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R10 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R10 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14R14 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R14 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R14 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14R18 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R18 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R18 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14W32 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14W32 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14W32 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M70C14R24 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R24 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C14R24 Carbon Steel Bandsaw Blade, 70" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.66

Our Price: $12.42

Savings: $1.24

Qty

Add

Magnate M70C38R24 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R24 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R24 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.83

Our Price: $12.57

Savings: $1.26

Qty

Add

Magnate M70C38H3 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H3 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H3 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38H4 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H4 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H4 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38H6 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H6 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38H6 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38R10 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R10 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R10 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38R14 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R14 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R14 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38R18 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R18 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R18 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C38R8 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R8 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C38R8 Carbon Steel Bandsaw Blade, 70" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M70C12H3 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H3 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H3 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12H4 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H4 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H4 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12H6 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H6 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12H6 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12R10 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R10 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R10 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12R14 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R14 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R14 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12R18 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R18 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R18 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12R24 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R24 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12R24 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C316S6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316S6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316S6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C12W32 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12W32 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C12W32 Carbon Steel Bandsaw Blade, 70" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M70C316R10 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R10 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R10 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C316R14 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R14 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R14 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C316R18 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R18 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R18 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C316R24 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R24 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316R24 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C316S4 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316S4 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316S4 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C316H6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316H6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C316H6 Carbon Steel Bandsaw Blade, 70" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M70C18R14 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C18R14 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C18R14 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $18.34

Our Price: $16.67

Savings: $1.67

Qty

Add

Magnate M70C18R18 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C18R18 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Magnate M70C18R18 Carbon Steel Bandsaw Blade, 70" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 10" (5 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 70 inch (5 ft. 10 in.; 5' 10"; 5 pies 10 pulgadas; 70 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET DBS-14 3 Wheel; American Machine AMT-3 Wheel; Delta 10” 30 years old (69-1/4” to 70-1/2”); Enco 199-9030 3 Wheel; Jet DBS-14 3 Wheel; Shopcraft T7060 3 Wheel; TRADESMAN 16" 3-wheel; TRADESMAN 10" 3-wheel; United BS375 3 Wheel; Valuecraft 8170 3 Wheel; Valuecraft 8170A 3 Wheel; BUFFALO 3WBS-14 3-WHEEl; Wilton 3230; Wilton 5 x 8; Record Power-Select RSBS10; Clark CBS355; Sealy SM1214

List Price: $18.34

Our Price: $16.67

Savings: $1.67

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm.

However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 24 raker to cut 1/16" to 1/4" thick material,
* 18 raker to cut 1/8" to 3/8" thick material,
* 14 raker to cut 3/16" to 7/16" thick material,
* 10 raker to cut 1/4" to 5/8" thick material,
* 6 Hook to cut 3/8" to 2" thick material,
* 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material.

The following bandsaw models use 70 inch ( 5 ft. 10 inch, 5' 10" ) long bandsaw blades.

United BS375; Jet DBS-14; Valuecraft 8170; Shopcraft T7060; Buffalo 3WBS-14; American Machine Co. AMT; Enco 199-9030. (Three Wheeler ); Record Power-Select RSBS10, Clark-CBS355; Sealy SM1214

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service