www.magnate.net

Shop Online

Home > Amana® Tool > Amana® Router Bits > Grooving > Bowl & Tray Router Bit 2 Flute Carbide Tipped

We found 4 results matching your criteria.

2 Flute Carbide Tipped

For routing solid wood serving trays, flat dishes, shallow bowls, and similar objects, use this 3 in 1 specialty plunging bit. It cuts flat, smooth bottom surfaces, vertical walls, and a transition radius between them, all in one pass. It can be used in handheld, table-mounted, and CNC routers.

Sort By:

Page of 1

Amana 45981 Bowl & Tray Router Bit - 1/8" Radius; 1/2" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2 Flute Carbide Tipped

Amana 45981 Bowl & Tray Router Bit - 1/8" Radius; 1/2" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-1/8" Overall Length; 2 Flute Carbide Tipped

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".