Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Panel Pilot
We found 15 results matching your criteria.
Panel Pilot Router Bit with 2 Pilots & Drill Point 2-Flute Carbide Tipped Panel Pilot Router Bit, 1 Flute Carbide Tipped Panel Pilot Router Bit, 2 Flute Carbide Tipped

2-Flute Carbide Tipped more info

Carbide Tipped more info

Carbide Tipped more info
Stagger Tooth Panel With Center Pilot Router Bit 2-Flute, 1/2" Shank Carbide Tipped Stagger Tooth Pilot Panel Router Bit 2-Flute Carbide Tipped

2-Flute, 1/2" Shank Carbide Tipped more info

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 501 Panel Pilot Router Bit, 1 Flute - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-15/32" Overall Length; Carbide Tipped
MAGNATE 501 Panel Pilot Router Bit, 1 Flute - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-15/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $11.17
Our Price: $10.15
Savings: $1.02
Qty Add
MAGNATE 502 Panel Pilot Router Bit, 1 Flute - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-7/8" Overall Length; Carbide Tipped
MAGNATE 502 Panel Pilot Router Bit, 1 Flute - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-7/8" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $12.21
Our Price: $11.10
Savings: $1.11
Qty Add
MAGNATE 503 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-13/32" Overall Length; Carbide Tipped
MAGNATE 503 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-13/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $12.33
Our Price: $11.21
Savings: $1.12
Qty Add
MAGNATE 521 Panel Pilot Router Bit, 2 Flute - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-15/32" Overall Length; Carbide Tipped
MAGNATE 521 Panel Pilot Router Bit, 2 Flute - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length; 2-15/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $12.71
Our Price: $11.55
Savings: $1.16
Qty Add
MAGNATE 505 Panel Pilot Router Bit, 2 Flute - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 1-1/2" Shank Length; 2-19/32" Overall Length; Carbide Tipped
MAGNATE 505 Panel Pilot Router Bit, 2 Flute - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 1-1/2" Shank Length; 2-19/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $13.89
Our Price: $12.63
Savings: $1.26
Qty Add
MAGNATE 504 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1-3/16" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-17/32" Overall Length; Carbide Tipped
MAGNATE 504 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1-3/16" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-17/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.08
Our Price: $12.80
Savings: $1.28
Qty Add
MAGNATE 500 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-27/32" Shank Length; 4" Overall Length; Carbide Tipped
MAGNATE 500 Panel Pilot Router Bit, 1 Flute - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-27/32" Shank Length; 4" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.59
Our Price: $13.26
Savings: $1.33
Qty Add
MAGNATE 506 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-19/32" Overall Length; Carbide Tipped
MAGNATE 506 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-19/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.88
Our Price: $13.53
Savings: $1.35
Qty Add
MAGNATE 543 Stagger Tooth Pilot Panel Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 543 Stagger Tooth Pilot Panel Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.28
Our Price: $14.80
Savings: $1.48
Qty Add
MAGNATE 507 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1-3/16" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-17/32" Overall Length; Carbide Tipped
MAGNATE 507 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1-3/16" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 3-17/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.65
Our Price: $15.14
Savings: $1.51
Qty Add
MAGNATE 509 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-27/32" Shank Length; 4" Overall Length; Carbide Tipped
MAGNATE 509 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-27/32" Shank Length; 4" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $18.08
Our Price: $16.44
Savings: $1.64
Qty Add
MAGNATE 508 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 4-13/32" Overall Length; Carbide Tipped
MAGNATE 508 Panel Pilot Router Bit, 2 Flute - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 4-13/32" Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $18.95
Our Price: $17.23
Savings: $1.72
Qty Add
MAGNATE 547 Stagger Tooth Pilot Panel Router Bit - 5/8" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 547 Stagger Tooth Pilot Panel Router Bit - 5/8" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.53
Our Price: $17.75
Savings: $1.78
Qty Add
MAGNATE 536 Panel Pilot Router Bit with 2 Pilots & Drill Point - 3/8" Cutting Diameter; 1-25/32" Cutting Height; 3/8" Shank Diameter; 3-5/8" Overall Length; 2-Flute Carbide Tipped
MAGNATE 536 Panel Pilot Router Bit with 2 Pilots & Drill Point - 3/8" Cutting Diameter; 1-25/32" Cutting Height; 3/8" Shank Diameter; 3-5/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.56
Our Price: $17.78
Savings: $1.78
Qty Add
MAGNATE 564 Stagger Tooth Panel With Center Pilot Router Bit - 1/2" Cutting Diameter; 1-1/8" & 1-1/8" Flute Height; 2-3/4" Cutting Length; 4-1/4" Overall Length; 2-Flute, 1/2" Shank Carbide Tipped
MAGNATE 564 Stagger Tooth Panel With Center Pilot Router Bit - 1/2" Cutting Diameter; 1-1/8" & 1-1/8" Flute Height; 2-3/4" Cutting Length; 4-1/4" Overall Length; 2-Flute, 1/2" Shank Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.68
Our Price: $17.89
Savings: $1.79
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>