www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 64-1/2" Long

We found 48 results matching your criteria.

Carbon Steel Bandsaw Blade, 64-1/2" Long

Bi-metal Bandsaw Blade, 64-1/2" Long

Carbide Tipped Bandsaw Blade, 64-1/2" Long

Sort By:

Page of 1

Magnate M64.5C14H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C14H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C14R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C14R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C14R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C14W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

List Price: $12.22

Our Price: $11.11

Savings: $1.11

Qty

Add

Magnate M64.5C38H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C38R8 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R8 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R8 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.23

Our Price: $12.03

Savings: $1.20

Qty

Add

Magnate M64.5C14R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C14R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.28

Our Price: $12.07

Savings: $1.21

Qty

Add

Magnate M64.5C38R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C38R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $13.31

Our Price: $12.10

Savings: $1.21

Qty

Add

Magnate M64.5C12H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H3 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C316S6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316S6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316S6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C12W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C12W32 Carbon Steel Bandsaw Blade, 64-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.14

Our Price: $12.85

Savings: $1.29

Qty

Add

Magnate M64.5C316R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R10 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5C316R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R14 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5C316R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R18 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5C316R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316R24 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5C316S4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316S4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316S4 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5C316H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5C316H6 Carbon Steel Bandsaw Blade, 64-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $14.76

Our Price: $13.42

Savings: $1.34

Qty

Add

Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H4 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12V8 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38V10 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38V14 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R18 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.72

Our Price: $34.29

Savings: $3.43

Qty

Add

Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M38H4 Bimetal Bandsaw Blade, 64-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $37.73

Our Price: $34.30

Savings: $3.43

Qty

Add

Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14H6 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $39.22

Our Price: $35.65

Savings: $3.57

Qty

Add

Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14V10 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $39.22

Our Price: $35.65

Savings: $3.57

Qty

Add

Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M14V14 Bimetal Bandsaw Blade, 64-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $39.22

Our Price: $35.65

Savings: $3.57

Qty

Add

Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12H3 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $39.41

Our Price: $35.83

Savings: $3.58

Qty

Add

Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5M12R24 Bimetal Bandsaw Blade, 64-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $39.41

Our Price: $35.83

Savings: $3.58

Qty

Add

Magnate M64.5E12T3 Carbide Tipped Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 5' 4-1/2" (5 feet 4-1/2 inch) Long

Magnate M64.5E12T3 Carbide Tipped Bandsaw Blade, 64-1/2" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 5' 4-1/2" (5 feet 4-1/2 inch) Long

This carbide-tipped bandsaw blade is designed with precision triple-chip ground teeth for smooth cuts and an excellent finish. Its high-performance steel back provides exceptional fatigue life. A carbide-tipped blade lasts significantly longer than carbon steel and bimetal blades when cutting abrasive non-ferrous materials and wood, especially tropical hardwoods like ebony, koa, and cocobolo. However, avoid using this blade to cut round logs unless you have a sawmill specifically designed for this purpose. For use with a metal-cutting bandsaw, it is ideal for cutting ferrous metals such as alloy steel, tool steel, bearing steel, carbon steel, stainless steel, and mold steel. Magnate Carbide Tipped Bandsaw Blades Application Notes: 1) 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4": Use 1/2" x 3 TPI, 3/4" x 3 TPI, or 1" x 3 TPI blades. 2) 1.3 TPI For cutting wood only from 3" to 12" (taller if fed slowly): Use 1" x 1.3 TPI blades. 3) 2 TPI For cutting wood only from 2" to 6" (taller if fed slowly): Use 1" x 2 TPI blades. 4) 2-3V For cutting wood from 1" to 6" (taller if fed slowly) or steel from 3" to 11": Use 1" x 2-3V, 1-1/4" x 2-3V or 1-1/2" x 2-3V blades. 5) 3-4V For cutting wood from 1" to 4" (taller if fed slowly) or steel from 1" to 6": Use 1-1/4" x 3-4V or 1-1/2" x 3-4V blades.

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 64-1/2 inch (5 ft. 4-1/2 in.; 5' 4-1/2"; 5 pies 4-1/2 pulgadas; 64-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 20-330; Delta 4 x 6; Grizzly G1010; Grizzly G9742; Grizzly G0622; Shopcraft: T7070; Shopmaster Emerson 10-1455; Shopmaster Emerson 10-1451; Rigid 945; Ohio Forge 510-505; Wells 57; Springer BS-45; Jet HVBS-56M; Jet JHVB-46; Jet HVBS-460; Jet HVBS-461; Jet HVBS-462; Jet HVBS-463; Star Machinery HVBS46; Continental 6-19604545-M; Continental 6-96045; Emerson 101451; Emerson 101455; Emerson 101465; Emerson 101466; Emerson 4.5; Emerson/Lynn 1465; Emerson/Lynn 1466; Emerson/Lynn 4500; Emerson/Lynn 4525-A; Grizzly 4" x 6""; Lynn Splrunger BS-45; Rigid 945; Rigid 946; Rong Fu 4.5; Rong Fu RF-115; Shopmaster 5-B-1400; Shopmaster MC-100; Skilsaw 1040; Skilsaw 1042; Taiwan Machinery Luxsaw-5U

List Price: $147.97

Our Price: $134.52

Savings: $13.45

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service