|
|
|
|
|
Magnate 7508 Point Cutting Roundover Router Bit - 1/16" Radius; 1/4" Shank Diameter; 1/4" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7507 Point Cutting Roundover Router Bit - 1/8" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3910 Plunge Roundover Router Bit - 1/8" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/4" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1251 Plunge Flat Roundover Router Bit - 3/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1220 Corner Rounding ( Round Over )/Beading Router Bit - 1/16" Radius; 5/16" Cutting Length; 1/4" Shank Diameter; 5/8" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7504 Point Cutting Roundover Router Bit - 3/16" Radius; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3911 Plunge Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1240 Corner Rounding ( Round Over )/Beading Router Bit - 1/16" Radius; 5/16" Cutting Length; 1/2" Shank Diameter; 5/8" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1200 Corner Rounding ( Round Over )/Beading Router Bit - 1/8" Radius; 3/8" Cutting Length; 1/4" Shank Diameter; 3/4" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1252 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3917 Plunge Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1242 Corner Rounding ( Round Over )/Beading Router Bit - 1/8" Radius; 3/8" Cutting Length; 1/2" Shank Diameter; 3/4" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1231 Corner Rounding ( Round Over )/Beading Router Bit - 5/32" Radius; 3/8" Cutting Length; 1/4" Shank Diameter; 13/16" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1201 Corner Rounding ( Round Over )/Beading Router Bit - 3/16" Radius; 3/8" Cutting Length; 1/4" Shank Diameter; 7/8" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1236 Corner Rounding ( Round Over )/Beading Router Bit - 5/32" Radius; 3/8" Cutting Length; 1/2" Shank Diameter; 13/16" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1272 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1262 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1202 Corner Rounding ( Round Over )/Beading Router Bit - 1/4" Radius; 7/16" Cutting Length; 1/4" Shank Diameter; 1" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1253 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7503 Point Cutting Roundover Router Bit - 1/4" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1206 Corner Rounding ( Round Over )/Beading Router Bit - 3/16" Radius; 3/8" Cutting Length; 1/2" Shank Diameter; 7/8" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3912 Plunge Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1207 Corner Rounding ( Round Over )/Beading Router Bit - 1/4" Radius; 7/16" Cutting Length; 1/2" Shank Diameter; 1" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1282 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1203 Corner Rounding ( Round Over )/Beading Router Bit - 5/16" Radius; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/8" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1256 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1273 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1254 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1268 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3918 Plunge Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1204 Corner Rounding ( Round Over )/Beading Router Bit - 3/8" Radius; 5/8" Cutting Length; 1/4" Shank Diameter; 1-1/4" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3913 Plunge Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1255 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1274 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7509 Point Cutting Roundover Router Bit - 5/16" Radius; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7513 Point Cutting Roundover Router Bit - 5/16" Radius; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1208 Corner Rounding ( Round Over )/Beading Router Bit - 5/16" Radius; 1/2" Cutting Length; 1/2" Shank Diameter; 1-1/8" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1234 Corner Rounding ( Round Over )/Beading Router Bit - 7/16" Radius; 5/8" Cutting Length; 1/4" Shank Diameter; 1-3/8" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1265 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3919 Plunge Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1209 Corner Rounding ( Round Over )/Beading Router Bit - 3/8" Radius; 5/8" Cutting Length; 1/2" Shank Diameter; 1-1/4" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1205 Corner Rounding ( Round Over )/Beading Router Bit - 1/2" Radius; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Diameter; 1-1/4" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7506 Point Cutting Roundover Router Bit - 3/8" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1257 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7502 Point Cutting Roundover Router Bit - 3/8" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1284 Plunge Flat Roundover Router Bit - 1/4" Radius; 7/16" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1285 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1239 Corner Rounding ( Round Over )/Beading Router Bit - 7/16" Radius; 11/16" Cutting Length; 1/2" Shank Diameter; 1-3/8" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1275 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3914 Plunge Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7505 Point Cutting Roundover Router Bit - 1/2" Radius; 1/4" Shank Diameter; 3/4" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1269 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3451 Classic Double Round Over Router Bit - 5/32" Radius; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/8" Overall Diameter; 1-1/4" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3920 Plunge Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7514 Point Cutting Roundover Router Bit - 7/16" Radius; 1/2" Shank Diameter; 11/16" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1210 Corner Rounding ( Round Over )/Beading Router Bit - 1/2" Radius; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3456 Classic Double Round Over Router Bit - 5/32" Radius; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1276 Plunge Flat Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1287 Matching Corner Round/Cove Router Bit - 1/4" Radius; 1/4" Shank Diameter; 17/32" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length
This bit is used to create both corner round and cove profiles which match each other. To create either profile, simply shift the bit to corresponding profile knife.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3452 Classic Double Round Over Router Bit - 7/32" Radius; 5/8" Cutting Length; 1/4" Shank Diameter; 1-3/8" Overall Diameter; 1-1/4" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7501 Point Cutting Roundover Router Bit - 1/2" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1244 Corner Rounding ( Round Over )/Beading Router Bit - 9/16" Radius; 13/16" Cutting Length; 1/2" Shank Diameter; 1-5/8" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3915 Plunge Roundover Router Bit - 1/2" Radius; 3/8" Small Diameter; 1/4" Shank Diameter; 3/4" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3457 Classic Double Round Over Router Bit - 7/32" Radius; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3921 Plunge Roundover Router Bit - 1/2" Radius; 3/8" Small Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1278 Plunge Flat Roundover Router Bit - 1/2" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3916 Plunge Roundover Router Bit - 1/2" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 7/8" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1211 Corner Rounding ( Round Over )/Beading Router Bit - 5/8" Radius; 7/8" Cutting Length; 1/2" Shank Diameter; 1-3/4" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1288 Matching Corner Round/Cove Router Bit - 5/16" Radius; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Overall Diameter; 1-1/2" Shank Length
This bit is used to create both corner round and cove profiles which match each other. To create either profile, simply shift the bit to corresponding profile knife.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3453 Classic Double Round Over Router Bit - 1/4" Radius; 11/16" Cutting Length;1/4" Shank Diameter; 1-1/2" Overall Diameter; 1-1/4" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7515 Point Cutting Roundover Router Bit - 9/16" Radius; 1/2" Shank Diameter; 13/16" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1294 Shear Under Roundover Router Bit - 3/8" Radius; 5/8" Cutting Length; 1-3/4" Shank Length; 2-1/8" Overall Diameter; BR-27 Bearing
Without turning over the heavy material, these bits create a round edge under the solid surface countertop.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3458 Classic Double Round Over Router Bit - 1/4" Radius; 11/16" Cutting Length; 1-1/2" Overall Diameter; 1-1/2" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3924 Plunge Roundover Router Bit - 9/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 15/16" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3471 Classic Triple Round Over Router Bit - 3/16" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 1-3/4" Overall Diameter; 1-1/2" Shank Length
Comes with a Magnate BR-03 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7516 Point Cutting Roundover Router Bit - 5/8" Radius; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3459 Classic Double Round Over Router Bit - 3/8" Radius; 7/8" Cutting Length; 1-1/2" Overall Diameter; 1-1/2" Shank Length; BR-03 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1295 Shear Under Roundover Router Bit - 1/2" Radius; 3/4" Cutting Length; 1-3/4" Shank Length; 2-3/8" Overall Diameter; BR-27 Bearing
Without turning over the heavy material, these bits create a round edge under the solid surface countertop.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1342 Classic Astragal Router Bit - 1" Cutting Length; 1/8" & 1/4" Radius; 1-1/8" Overall Diameter; BR-05 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1289 Matching Corner Round/Cove Router Bit - 3/8" Radius; 1/4" Shank Diameter; 25/32" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length
This bit is used to create both corner round and cove profiles which match each other. To create either profile, simply shift the bit to corresponding profile knife.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3922 Plunge Roundover Router Bit - 5/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1212 Corner Rounding ( Round Over )/Beading Router Bit - 3/4" Radius; 1" Cutting Length; 1/2" Shank Diameter; 2" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1364 Double Round Over Molding Router Bit - 3/16" Radius; 1" Bead Height; 1-1/4" Cutting Length; 1-5/8" Overall Diameter; BR-05 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7517 Point Cutting Roundover Router Bit - 3/4" Radius; 1/2" Shank Diameter; 1" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1343 Classic Astragal Router Bit - 1-3/16" Cutting Length; 5/32" & 5/16" Radius; 1-1/4" Overall Diameter; BR-05 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1246 Corner Rounding ( Round Over )/Beading Router Bit - 7/8" Radius; 1-1/8" Cutting Length; 1/2" Shank Diameter; 2-1/4" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7701 Double Round Over Router Bit - 3/4" Material Thickness; 3/16" Radius; 1-1/8" Cutting Length; 1-1/4" Overall Diameter; BR-06 Bearing
This unique bit enables you to round over the top and bottom corners of wood stock in one pass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7731 Adjustable Double Round Over Router Bit - 1/8" Radius; 1-5/8" Cutting Length; 1" Overall Diameter; 1-1/2" Shank Length; BR-32 Bearing
These cutters allow you to round or bead. Both profile cutters are interchangeable. Each bit includes 2 profile cutters, 1 bearing, 1 1/2"-shank arbor and 1 nut and shims.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3923 Plunge Roundover Router Bit - 3/4" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1-1/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1213 Corner Rounding ( Round Over )/Beading Router Bit - 1" Radius; 1-1/4" Cutting Length; 1/2" Shank Diameter; 2-1/2" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3971 Roundover Undermount Bowl Router Bit - 10 Degree; 1-1/4" Cutting Height; 7/16" Radius; 2-1/4" Overall Diameter; BR-57 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1298 Shear Under Roundover Router Bit - 5/8" Radius; 7/8" Cutting Length; 1-3/4" Shank Length; 2-5/8" Overall Diameter; BR-27 Bearing
Without turning over the heavy material, these bits create a round edge under the solid surface countertop.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7732 Adjustable Double Round Over Router Bit - 3/16" Radius; 1-5/8" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; BR-32 Bearing
These cutters allow you to round or bead. Both profile cutters are interchangeable. Each bit includes 2 profile cutters, 1 bearing, 1 1/2"-shank arbor and 1 nut and shims.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1214 Corner Rounding ( Round Over )/Beading Router Bit - 1-1/8" Radius; 1-3/8" Cutting Length; 1/2" Shank Diameter; 2-3/4" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1344 Classic Astragal Router Bit - 1-1/2" Cutting Length; 3/16" & 1/2" Radius; 1-3/8" Overall Diameter; BR-05 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3976 Roundover Undermount Bowl Router Bit - 18 Degree; 1" Cutting Height; 1/2" Radius; 2-1/8" Overall Diameter; BR-74 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7592 Plunge Roundover with Radius Router Bit - 2" Cutting Diameter; 1" & 1/16" Radius
This bit can be also used for the Legacy Ornamental Mill. Great for milling 2" and 3" diameter balls on posts or large beads on column bases. Can also be used for large diameter rope columns with a very pronounced rope design.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7702 Double Round Over Router Bit - 7/8" Material Thickness; 1/4" Radius; 1-1/4" Cutting Length; 1-5/8" Overall Diameter; BR-07 Bearing
This unique bit enables you to round over the top and bottom corners of wood stock in one pass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3927 Plunge Roundover Router Bit - 1" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1-3/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1215 Corner Rounding ( Round Over )/Beading Router Bit - 1-1/4" Radius; 1-1/2" Cutting Length; 1/2" Shank Diameter; 3" Overall Diameter; 1-1/2" Shank Length
Designed for decorative edge rounding. Good for making drop leaf table joints. It comes with a Magnate BR-03 bearing. By replacing original bearing (Magnate BR-03) by a Magnate BR-02, It creates a round edge with stepped bead.
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
