Magnate 2351 PCD 1+1 Compression Router Bit - 3/4" Cutting Diameter; 1-5/8" Cutting Height; 3/4" Shank Diameter; 4" Overall Length; 1-Flute Up-Down, Right Rotation
Two Flute Up-Down Diamond Spiral Bit;RH Compression Bit
Please note: Product images are for illustrative purposes and may vary from the actual item.
PCD (Polycrystalline Diamond) tooling provides exceptional wear resistance when cutting abrasive materials. It is not recommended for hand-operated tools but performs exceptionally well in CNC woodworking applications, including cutting plastics and non-ferrous metals. When used properly, end users can expect 30 times the tool life when compared to carbide. Not only does it wear evenly and increase tool life, PCD use cuts down on the end user's tool change and setup time which saves money and increases productivity Compression-style flutes help minimize chipping and delamination for cleaner, more precise cuts.
When manufacturer RPM specifications are not available, the following RPM ranges may be used as general starting guidelines for CNC woodworking applications 1) 1/4” to 3/8” diameter bits: 18,000 to 24,000 RPM 2) 1/2” to 5/8” diameter bits: 16,000 to 22,000 RPM 3) 3/4” to 1” diameter bits: 12,000 to 18,000 RPM 4) 1-1/4” to 1-1/2” diameter bits: 9,000 to 16,000 RPM 5) 2” to 2-1/2” diameter bits: 6,000 to 12,000 RPM 6) 3” diameter bits: 5,000 to 8,000 RPM RPM should be adjusted according to cutter diameter to maintain the appropriate surface (cutting) speed, while actual RPM and feed rate may vary depending on material, tool geometry, chip load, and application. Always follow the manufacturer's recommended and maximum RPM specifications.
Cancer and Reproductive Harm WARNING: Cancer: Avoid Inhaling Wood Dust/Cobalt-metal-Powder ADVERTENCIA: Cancer - Evite inhalar polvo de madera/polvo metalico de cobalto Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. More Safety Information www.p65warnings.ca.gov www.p65warnings.ca.gov/chemicals/cobalt-metal-powder www.p65warnings.ca.gov/products/wood-dust
|
