|
|
|
|
|
Amana 57122 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" & 3/4" Countertop Thickness; 1/2" Shank Diameter; 15/16" Cutting Height; 11.5 Degree; 3" Overall Length; 1-1/4" Large Diameter; 47726 Bearing
Amana 57122 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" & 3/4" Countertop Thickness; 1/2" Shank Diameter; 15/16" Cutting Height; 11.5 Degree; 3" Overall Length; 1-1/4" Large Diameter; 47726 Bearing
Compatible with Corian sink & bowls: 802S, 804S, 805S, 809S, 810S and 871S. ; 2 Flute, Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $145.95 Our Price: $104.26 Savings: $41.69
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57168 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" & 3/4" Countertop Thickness; 1/2" Shank Diameter; 1" Cutting Height; 11.5 Degree; 3" Overall Length; 1-1/4" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl #874-S
Amana 57168 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" & 3/4" Countertop Thickness; 1/2" Shank Diameter; 1" Cutting Height; 11.5 Degree; 3" Overall Length; 1-1/4" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl #874-S
2 Flute, Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $166.55 Our Price: $118.97 Savings: $47.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57165 4 Wing Cut Out Solid Surface Router Bit - 1/4" Cutting Height; 7/8", 1" Cutting Depth; 3" Large Diameter; 1/2" Shank Diameter; 3-9/32" Overall Length; 47745 Bearing; 47739 Collet; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $179.40 Our Price: $128.14 Savings: $51.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57128 Roundover Undermount Bowl Router Bit - 3/4" Countertop Thickness; 18 Degree; 1" Cutting Height; 1/2" Radius; 3" Overall Length; 2-1/8" Large Diameter; 47726 Bearing
Amana 57128 Roundover Undermount Bowl Router Bit - 3/4" Countertop Thickness; 18 Degree; 1" Cutting Height; 1/2" Radius; 3" Overall Length; 2-1/8" Large Diameter; 47726 Bearing
Compatible with Corian sink & bowl#'s: 802S, 804S, 805S, 809S, 810S and 871S; 1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $183.90 Our Price: $131.36 Savings: $52.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57160 Roundover Undermount Bowl Router Bit - 25/32" Countertop Thickness; 17 Degree; 1" Cutting Height; 1/2" Radius; 2-7/8" Overall Length; 2-1/8" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
Amana 57160 Roundover Undermount Bowl Router Bit - 25/32" Countertop Thickness; 17 Degree; 1" Cutting Height; 1/2" Radius; 2-7/8" Overall Length; 2-1/8" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $192.15 Our Price: $137.26 Savings: $54.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57161 Roundover Undermount Bowl Router Bit - 11/16" Countertop Thickness; 12 Degree; 7/8" Cutting Height; 9/16" Radius; 2-11/16" Overall Length; 2-3/8" Large Diameter; 47733 Bearing; Compatible with Wilsonart, SSV Bowl
Amana 57161 Roundover Undermount Bowl Router Bit - 11/16" Countertop Thickness; 12 Degree; 7/8" Cutting Height; 9/16" Radius; 2-11/16" Overall Length; 2-3/8" Large Diameter; 47733 Bearing; Compatible with Wilsonart, SSV Bowl
1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $192.15 Our Price: $137.26 Savings: $54.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57166 4 Wing Cut Out Solid Surface Router Bit - 3/16" Cutting Height; 1" Cutting Depth; 3" Large Diameter; 1/2" Shank Diameter; 3-5/32" Overall Length; 47745, 47747 Bearing; 47739 Collet; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $192.15 Our Price: $137.26 Savings: $54.89
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57130 Roundover Undermount Bowl Router Bit - 1" Countertop Thickness; 18 Degree; 1-1/4" Cutting Height; 9/16" Radius; 3-1/4" Overall Length; 2-1/4" Large Diameter; 47726 Bearing
Amana 57130 Roundover Undermount Bowl Router Bit - 1" Countertop Thickness; 18 Degree; 1-1/4" Cutting Height; 9/16" Radius; 3-1/4" Overall Length; 2-1/4" Large Diameter; 47726 Bearing
Compatible with Corian sink & bowl#'s: 802S, 804S, 805S, 809S, 810S and 871S; 1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $204.40 Our Price: $146.00 Savings: $58.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57129 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" - 1-1/4" Countertop Thickness; 1/2" Shank Diameter; 1-1/4" Cutting Height; 12 Degree; 3-1/16" Overall Length; 1-1/2" Large Diameter; 47732 Bearing
Amana 57129 Bevel Undermount Bowl Solid Surface Router Bit - 1/2" - 1-1/4" Countertop Thickness; 1/2" Shank Diameter; 1-1/4" Cutting Height; 12 Degree; 3-1/16" Overall Length; 1-1/2" Large Diameter; 47732 Bearing
Compatible with Wilsonart, SSV bowls; 2 Flute, Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $205.00 Our Price: $146.43 Savings: $58.57
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57158 Roundover Undermount Bowl Router Bit - 17/32" Countertop Thickness; 14 Degree; 11/16" Cutting Height; 1/2" Radius; 2-1/2" Overall Length; 2" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
Amana 57158 Roundover Undermount Bowl Router Bit - 17/32" Countertop Thickness; 14 Degree; 11/16" Cutting Height; 1/2" Radius; 2-1/2" Overall Length; 2" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $217.80 Our Price: $155.57 Savings: $62.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Amana 57156 Roundover Undermount Bowl Router Bit - 17/32" Countertop Thickness; 17 Degree; 11/16" Cutting Height; 3/8" Radius; 2-1/2" Overall Length; 1-25/32" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
Amana 57156 Roundover Undermount Bowl Router Bit - 17/32" Countertop Thickness; 17 Degree; 11/16" Cutting Height; 3/8" Radius; 2-1/2" Overall Length; 1-25/32" Large Diameter; 47731 Bearing; Compatible with Corian sink & bowl#'s 874#
1/2" Shank Diameter, 2 Flute Carbide Tipped.
Designed for decorative finished edges on undermount bowls. Note: Corian is a registered trademark of DuPont. Wilsonart and SSV are registered trademarks of Wilsonart LLC.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $236.45 Our Price: $168.90 Savings: $67.55
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
