|
|
|
|
|
MAGNATE 408 7.5 Degree Dovetail Router Bit - 1/4" Cutting Diameter; 5/16" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; Compatible with Leigh Dovetail. ; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.21 Our Price: $10.19 Savings: $1.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 409 8 Degree Dovetail Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.32 Our Price: $10.29 Savings: $1.03
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 411 9 Degree Dovetail Router Bit - 5/16" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; Compatible for Incra, JoinTech dovetail.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.61 Our Price: $10.55 Savings: $1.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 458 7.5 Degree Dovetail Router Bit - 1/4" Cutting Diameter; 5/16" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.91 Our Price: $10.83 Savings: $1.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 401 9 Degree Dovetail Router Bit - 3/8" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; Compatible for Incra, JoinTech dovetail.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $11.96 Our Price: $10.87 Savings: $1.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 410 8 Degree Dovetail Router Bit - 5/16" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.35 Our Price: $11.23 Savings: $1.12
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 461 9 Degree Dovetail Router Bit - 5/16" Cutting Diameter; 3/8" Cutting Height; 1/2" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.41 Our Price: $11.28 Savings: $1.13
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 413 14-Degree Dovetail Router Bit - 3/8" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $12.98 Our Price: $11.80 Savings: $1.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 412 8 Degree Dovetail Router Bit - 3/8" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-3/8" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.10 Our Price: $11.91 Savings: $1.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 427 7 Degree Dovetail Router Bit - 17/32" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; Compatible with Porter-Cable Jig 4210 & 4212; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.12 Our Price: $11.93 Savings: $1.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 415 10 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 2-1/2" Overall Length; Compatible for Leigh Dovetail; Compatible for Incra, JoinTech Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.20 Our Price: $12.00 Savings: $1.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 451 9 Degree Dovetail Router Bit - 3/8" Cutting Diameter; 3/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.42 Our Price: $12.20 Savings: $1.22
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 440 8 Degree Dovetail Router Bit - 5/16" Cutting Diameter; 3/8" Cutting Height; 8mm Shank Diameter; 2-1/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.51 Our Price: $12.28 Savings: $1.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 423 8 Degree Dovetail Router Bit - 7/16" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 2-3/8" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.57 Our Price: $12.34 Savings: $1.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 462 8 Degree Dovetail Router Bit - 3/8" Cutting Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-3/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.61 Our Price: $12.37 Savings: $1.24
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 402 14-Degree Dovetail Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2-3/8" Overall Length; Compatible with Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.66 Our Price: $12.42 Savings: $1.24
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 442 8 Degree Dovetail Router Bit - 3/8" Cutting Diameter; 1/2" Cutting Height; 8mm Shank Diameter; 2-3/8" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.83 Our Price: $12.57 Savings: $1.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 465 10 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; Compatible for Incra, JoinTech Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.90 Our Price: $12.64 Savings: $1.26
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 414 8 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 13/16" Cutting Height; 1/4" Shank Diameter; 2-3/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.94 Our Price: $12.67 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 464 8 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 13/16" Cutting Height; 1/2" Shank Diameter; 2-3/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $13.97 Our Price: $12.70 Savings: $1.27
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 454 8 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 13/16" Cutting Height; 8mm Shank Diameter; 2-3/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.19 Our Price: $12.90 Savings: $1.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 407 14-Degree Dovetail Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; Compatible with Incra, JoinTech Dovetail; Compatible with OmniJig
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.38 Our Price: $13.07 Savings: $1.31
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 417 7 Degree Dovetail Router Bit - 5/8" Cutting Diameter; 7/8" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.38 Our Price: $13.07 Savings: $1.31
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 426 14-Degree Dovetail Router Bit - 17/32" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.49 Our Price: $13.17 Savings: $1.32
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 416 18 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.62 Our Price: $13.29 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 467 7 Degree Dovetail Router Bit - 5/8" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; Compatible with Incra and JoinTech dovetail machines; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.63 Our Price: $13.30 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 496 7 Degree Left Rotation Dovetail Router Bit - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.66 Our Price: $13.33 Savings: $1.33
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 453 8 Degree Dovetail Router Bit - 7/16" Cutting Diameter; 5/8" Cutting Height; 8mm Shank Diameter; 2-3/8" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.74 Our Price: $13.40 Savings: $1.34
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 418 7 Degree Dovetail Router Bit - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; Compatible with Incra and JoinTech dovetail machines; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $14.83 Our Price: $13.48 Savings: $1.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 403 14-Degree Dovetail Router Bit - 5/8" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 2-7/8" Overall Length; Compatible with Legacy Mill for 90- or 120-degree indexed dovetail slots in 3-legged pedestals; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.16 Our Price: $13.78 Savings: $1.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 455 10 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 5/8" Cutting Height; 8mm Shank Diameter; 2-1/2" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.17 Our Price: $13.79 Savings: $1.38
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 446 18 Degree Dovetail Router Bit - 1/2" Cutting Diameter; 3/8" Cutting Height; 8mm Shank Diameter; 2-1/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.36 Our Price: $13.96 Savings: $1.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 432 14-Degree Dovetail Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Height; 8mm Shank Diameter; 2-3/8" Overall Length; Compatible with Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.38 Our Price: $13.98 Savings: $1.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 468 7 Degree Dovetail Router Bit - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; Compatible with Incra and JoinTech dovetail machines; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.52 Our Price: $14.11 Savings: $1.41
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 497 7 Degree Left Rotation Dovetail Router Bit - 7/8" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $15.72 Our Price: $14.29 Savings: $1.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 404 14-Degree Dovetail Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; Compatible with OmniJig; Compatible with Legacy Mill for 90- or 120-degree indexed dovetail slots in 3-legged pedestals
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.06 Our Price: $14.60 Savings: $1.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 428 7 Degree Dovetail Router Bit - 7/8" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.08 Our Price: $14.62 Savings: $1.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 470 8 Degree Dovetail Router Bit - 11/16" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.09 Our Price: $14.63 Savings: $1.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 429 7 Degree Dovetail Router Bit - 1" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.47 Our Price: $14.97 Savings: $1.50
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 419 14-Degree Dovetail Router Bit - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.70 Our Price: $15.18 Savings: $1.52
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 469 14-Degree Dovetail Router Bit - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; Compatible with Legacy Mill for 90- or 120-degree indexed dovetail slots in 3-legged pedestals; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.90 Our Price: $15.36 Savings: $1.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 498 7 Degree Left Rotation Dovetail Router Bit - 1" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 2-1/2" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $16.93 Our Price: $15.39 Savings: $1.54
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 405 14-Degree Dovetail Router Bit - 7/8" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; Compatible with Legacy Mill for 90- or 120-degree indexed dovetail slots in 3-legged pedestals; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.04 Our Price: $15.49 Savings: $1.55
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 406 14-Degree Dovetail Router Bit - 1" Cutting Diameter; 7/8" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; Compatible with Legacy Mill for 90- or 120-degree indexed dovetail slots in 3-legged pedestals; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.41 Our Price: $15.83 Savings: $1.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 483 7 Degree Dovetail Router Bit With Top Bearing - 5/8" Cutting Diameter; 1" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; BR-05 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.57 Our Price: $15.97 Savings: $1.60
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 471 8 Degree Dovetail Router Bit - 13/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3-1/4" Overall Length; Compatible for Leigh Dovetail; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.77 Our Price: $16.15 Savings: $1.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 484 7 Degree Dovetail Router Bit With Top Bearing - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; BR-08 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.90 Our Price: $16.27 Savings: $1.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 479 25 Degree Half Blind Dovetail Router Bit - 1/8" Radius; 3/8" Cutting Diameter; 3/8" Profile Height; 1/2" Cutting Height; 2-1/2" Overall Length; 1/2" Shank 2 Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $17.97 Our Price: $16.34 Savings: $1.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 475 10 Degree 1-Flute Dovetail Router Bit, For Continuous Dovetail Machine - 14mm Cutting Diameter; 18mm Cutting Height; 12mm Shank Diameter; 60mm Overall Length; Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $19.81 Our Price: $18.01 Savings: $1.80
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 486 14 Degree Dovetail Router Bit With Top Bearing - 3/4" Cutting Diameter; 7/8" Cutting Height; 1/4" Shank Diameter; 2-5/8" Overall Length; BR-08 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $20.53 Our Price: $18.66 Savings: $1.87
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 5401 14 Degree Butterfly Spline Router Bit - 3/4" Cutting Diameter; 1-1/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $26.27 Our Price: $23.88 Savings: $2.39
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 489 14 Degree Dovetail Router Bit With Top Bearing - 1-1/8" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 3" Overall Length; BR-07 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $32.74 Our Price: $29.76 Savings: $2.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
MAGNATE 5402 14 Degree Butterfly Spline Router Bit - 1-1/4" Cutting Diameter; 2" Cutting Height; 1/2" Shank Diameter; 3-3/8" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $35.89 Our Price: $32.63 Savings: $3.26
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
|
|
