Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Stile & Rail
We found 58 results matching your criteria.
Reversible Stile & Rail Router Bit 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped Reversible Stile & Rail Router Bit 1/4" Shank Diameter, 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped Stile or Rail Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped

1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped more info

1/4" Shank Diameter, 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped more info

1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped more info
Stile / Rail Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped One Piece Stile and Rail Router Bit, For 3/4" to 7/8" Material 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped Window Sash Router Bit 2-Flute Carbide Tipped, 1/8" Radius

1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped more info

1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped more info

2-Flute Carbide Tipped, 1/8" Radius more info
Slot Cutter For Reversible Stile and Rail Router Bit 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 9000 Slot Cutter For Stile and Rail Router Bits - 5/16" Bore; 1/4" Cutting Height; Cutting Depth; 1-5/8" Overall Diameter; 2-Flute Carbide Tipped
MAGNATE 9000 Slot Cutter For Stile and Rail Router Bits - 5/16" Bore; 1/4" Cutting Height; Cutting Depth; 1-5/8" Overall Diameter; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $15.00
Our Price: $13.64
Savings: $1.36
Qty Add
MAGNATE 6205 Window Sash Router Bit, For 1-1/8" to 1-5/8" Material - 5/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 1-3/8" Overall Diameter; 1/8" Radius, 2-Flute Carbide Tipped
MAGNATE 6205 Window Sash Router Bit, For 1-1/8" to 1-5/8" Material - 5/8" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length; 1-3/8" Overall Diameter; 1/8" Radius, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $27.31
Our Price: $24.83
Savings: $2.48
Qty Add
MAGNATE 9005R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Groove Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9005R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Groove Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $42.92
Our Price: $39.02
Savings: $3.90
Qty Add
MAGNATE 9005 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Tongue & Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9005 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Tongue & Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $46.19
Our Price: $41.99
Savings: $4.20
Qty Add
MAGNATE S9005 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Tongue & Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9005 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Tongue & Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $46.41
Our Price: $42.19
Savings: $4.22
Qty Add
MAGNATE 9005S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Tongue Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9005S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Tongue Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $46.43
Our Price: $42.21
Savings: $4.22
Qty Add
MAGNATE 9010R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 15 degree Shaker Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9010R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 15 degree Shaker Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.24
Our Price: $45.67
Savings: $4.57
Qty Add
MAGNATE 9010S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 15 degree Shaker Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9010S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 15 degree Shaker Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.24
Our Price: $45.67
Savings: $4.57
Qty Add
MAGNATE 9004 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Bevel Profile; 7/8" Cutting Height; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
MAGNATE 9004 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Bevel Profile; 7/8" Cutting Height; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.78
Our Price: $46.16
Savings: $4.62
Qty Add
MAGNATE 9025R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Tongue Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9025R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Tongue Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.88
Our Price: $46.25
Savings: $4.63
Qty Add
MAGNATE 9004S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 14 degree Bevel Profile; Stile Cut; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
MAGNATE 9004S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 14 degree Bevel Profile; Stile Cut; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.89
Our Price: $46.26
Savings: $4.63
Qty Add
MAGNATE S9004 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Bevel Profile; 7/8" Cutting Height; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
MAGNATE S9004 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Bevel Profile; 7/8" Cutting Height; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.89
Our Price: $46.26
Savings: $4.63
Qty Add
MAGNATE 9004R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 14 degree Bevel Profile; Rail Cut; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
MAGNATE 9004R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - 14 degree Bevel Profile; Rail Cut; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $50.94
Our Price: $46.31
Savings: $4.63
Qty Add
MAGNATE 9001 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9001 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.03
Our Price: $46.39
Savings: $4.64
Qty Add
MAGNATE S9001 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9001 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.06
Our Price: $46.42
Savings: $4.64
Qty Add
MAGNATE 9003 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Classic Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9003 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Classic Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.08
Our Price: $46.44
Savings: $4.64
Qty Add
MAGNATE 9003S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9003S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.16
Our Price: $46.51
Savings: $4.65
Qty Add
MAGNATE S9003 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Classic Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9003 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Classic Ogee Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.19
Our Price: $46.54
Savings: $4.65
Qty Add
MAGNATE 9003R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9003R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.26
Our Price: $46.60
Savings: $4.66
Qty Add
MAGNATE 9009 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Cove & Bead Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9009 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Cove & Bead Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.26
Our Price: $46.60
Savings: $4.66
Qty Add
MAGNATE 9001S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9001S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.35
Our Price: $46.68
Savings: $4.67
Qty Add
MAGNATE S9009 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Cove & Bead Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9009 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Cove & Bead Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.35
Our Price: $46.68
Savings: $4.67
Qty Add
MAGNATE 9001R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9001R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.45
Our Price: $46.77
Savings: $4.68
Qty Add
MAGNATE 9008S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Bead Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9008S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Bead Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.60
Our Price: $46.91
Savings: $4.69
Qty Add
MAGNATE 9008R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Bead Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9008R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Bead Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.67
Our Price: $46.97
Savings: $4.70
Qty Add
MAGNATE 9002 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Classic Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9002 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - Classic Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.74
Our Price: $47.04
Savings: $4.70
Qty Add
MAGNATE S9002 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Classic Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9002 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - Classic Profile; 7/8" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.82
Our Price: $47.11
Savings: $4.71
Qty Add
MAGNATE 9002S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9002S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $52.03
Our Price: $47.30
Savings: $4.73
Qty Add
MAGNATE 9002R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9002R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Classic Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $52.09
Our Price: $47.35
Savings: $4.74
Qty Add
MAGNATE 9007S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Concave Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9007S Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Concave Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $52.14
Our Price: $47.40
Savings: $4.74
Qty Add
MAGNATE 9007R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Concave Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9007R Stile or Rail (Cope or Stick) Router Bit, 15/16" Cutting Height for 3/4" to 7/8" Material - Concave Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $52.20
Our Price: $47.45
Savings: $4.75
Qty Add
MAGNATE 9006 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - V-Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9006 Stile & Rail (Cope and Stick) Reversible 1/4" Shank Router Bit For 3/4" to 7/8" Material - V-Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/4" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $58.19
Our Price: $52.90
Savings: $5.29
Qty Add
MAGNATE S9006 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - V-Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE S9006 Stile & Rail (Cope and Stick) Reversible 1/2" Shank Router Bit For 3/4" to 7/8" Material - V-Groove Profile; 3/4" Cutting Height; BR-06 Bearing; 1-1/2" Shank Length, 1-5/8" Overall Diameter, 2-Flute Carbide Tipped
Stile Cut : Set up router bit for stile cut (Profile Cutter, Straight Cutter, Bearing, Nut) Rip door sides to desired with. (typically 2"""" to 4"""") Set up router bit for stile cut. (Make sure the nut is secure by tightening in router) Set height of bit and make test cuts for desire pattern. Make all the stile cuts at one time to insure they are all the same. Cut a 6"""" length and save as a set up example. Cut length for desired door width. For Rail Length, it equals Door Height + 3/4"""" - Stile Width * 2 Rail Cut : Set up router bit for rail cut (Straight Cutter, Bearing, Profile Cutter, Nut ) Adjust the height of the bit for the bearing spacing even with the slot on the rail cut. Make final adjustments using test cuts and matching to be flush when placed together with rail. Cut three 6"""" squares of material to be used as guides for rail cuts. Make a rail cut on one side of one square. (rail guide. Fit rail to be cut into the rail guide so the ends are flush. This is done to avoid frayed edges on the rail at the overlap end. Place the second square on the opposite side of the stile cut and flush with the end. Place the third square over the first two squares and the rail and secure with screws to make a Rail Cutting Jig. Save for future use. Cut rails on both ends using Rail cutting Jig to avoid end fray. Panel will be 3/4"""" wider than inside of frame.

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $58.29
Our Price: $52.99
Savings: $5.30
Qty Add
MAGNATE 9026R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - V-Groove Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9026R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - V-Groove Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $58.58
Our Price: $53.25
Savings: $5.33
Qty Add
MAGNATE 9025S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Groove Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9025S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Groove Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $59.02
Our Price: $53.65
Savings: $5.37
Qty Add
Magnate 9029S Stile / Rail Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Cove & Bead Profile; Stile Cut; BR-06 Bearing
Magnate 9029S Stile / Rail Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Cove & Bead Profile; Stile Cut; BR-06 Bearing
To create precision stile and rail joints without having to disassemble and reassemble the parts as you do with the reversible design. By using two bits, both stile and rail cuts can be made at the same time. The groove created is 1/4" wide x 7/16" depth. more info
List Price: $59.04
Our Price: $53.67
Savings: $5.37
Qty Add
Magnate 9029R Stile / Rail Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Cove & Bead Profile; Rail Cut; BR-06 Bearing
Magnate 9029R Stile / Rail Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Cove & Bead Profile; Rail Cut; BR-06 Bearing
To create precision stile and rail joints without having to disassemble and reassemble the parts as you do with the reversible design. By using two bits, both stile and rail cuts can be made at the same time. The groove created is 1/4" wide x 7/16" depth. more info
List Price: $59.08
Our Price: $53.71
Savings: $5.37
Qty Add
MAGNATE 9026S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - V-Groove Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9026S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - V-Groove Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $63.04
Our Price: $57.31
Savings: $5.73
Qty Add
MAGNATE 6201 Window Sash Router Bit, For 1-1/8" to 1-5/8" Material - 1-3/4" Cutting Height; 1/2" Shank Diameter; 3-3/4" Overall Length; 1-3/8" Overall Diameter; Reversible, comes with a BR-06 bearing; 1/8" Radius, 2-Flute Carbide Tipped
MAGNATE 6201 Window Sash Router Bit, For 1-1/8" to 1-5/8" Material - 1-3/4" Cutting Height; 1/2" Shank Diameter; 3-3/4" Overall Length; 1-3/8" Overall Diameter; Reversible, comes with a BR-06 bearing; 1/8" Radius, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $66.53
Our Price: $60.48
Savings: $6.05
Qty Add
MAGNATE 9009B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Cove & Bead Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9009B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Cove & Bead Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $68.95
Our Price: $62.68
Savings: $6.27
Qty Add
MAGNATE 9027S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Concave Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9027S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Concave Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $68.97
Our Price: $62.70
Savings: $6.27
Qty Add
MAGNATE 9028S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bead Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9028S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bead Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $68.97
Our Price: $62.70
Savings: $6.27
Qty Add
MAGNATE 9027R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Concave Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9027R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Concave Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.01
Our Price: $62.74
Savings: $6.27
Qty Add
MAGNATE 9028R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bead Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9028R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bead Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.01
Our Price: $62.74
Savings: $6.27
Qty Add
MAGNATE 9024S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bevel Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9024S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bevel Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.11
Our Price: $62.83
Savings: $6.28
Qty Add
MAGNATE 9004B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Bevel Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
MAGNATE 9004B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Bevel Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; The angle that forms the inside edge next to the center is 14 degree
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.12
Our Price: $62.84
Savings: $6.28
Qty Add
MAGNATE 9024R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bevel Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9024R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Bevel Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.16
Our Price: $62.87
Savings: $6.29
Qty Add
MAGNATE 9023S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Traditional Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9023S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Traditional Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.25
Our Price: $62.95
Savings: $6.30
Qty Add
MAGNATE 9023R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Traditional Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9023R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Traditional Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.29
Our Price: $62.99
Savings: $6.30
Qty Add
MAGNATE 9021S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9021S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Ogee Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.32
Our Price: $63.02
Savings: $6.30
Qty Add
MAGNATE 9021R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9021R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Ogee Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.37
Our Price: $63.06
Savings: $6.31
Qty Add
MAGNATE 9002B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Classic Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9002B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Classic Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.39
Our Price: $63.08
Savings: $6.31
Qty Add
MAGNATE 9008B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Bead Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9008B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Bead Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.48
Our Price: $63.16
Savings: $6.32
Qty Add
MAGNATE 9007B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Concave Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9007B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Concave Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.50
Our Price: $63.18
Savings: $6.32
Qty Add
MAGNATE 9003B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Classic Ogee Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9003B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Classic Ogee Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $69.55
Our Price: $63.23
Savings: $6.32
Qty Add
MAGNATE 9001B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Ogee Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
MAGNATE 9001B One Piece Stile & Rail (Cope & Stick) Router Bit, For 3/4" to 7/8" Material - Ogee Profile; 1-5/8" Overall Diameter; 1-1/2" Shank Length; BR-06 Bearing; 1/2" Shank Diameter, 1-1/8" Cutting Height, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $70.17
Our Price: $63.79
Savings: $6.38
Qty Add
MAGNATE 9022S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Classic Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9022S Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Classic Profile; Stile Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $70.26
Our Price: $63.87
Savings: $6.39
Qty Add
MAGNATE 9022R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Classic Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
MAGNATE 9022R Stile or Rail (Cope or Stick) Router Bit, 1-3/8" Cutting Height for 1" to 1-3/8" Material - Classic Profile; Rail Cut; BR-06 Bearing; 1/2" Shank Diameter, 3-1/8" Overall Length, 1-3/4" Overall Diameter, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $70.30
Our Price: $63.91
Savings: $6.39
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>