Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Cove
We found 46 results matching your criteria.
Bead & Cove Router Bit 1/2" Shank Diameter, 2-Flute Carbide Tipped Classic Cove Router Bit 2-Flute Carbide Tipped Classic Spiral Router Bit 1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped

1/2" Shank Diameter, 2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info

1/2" Shank Diameter, 2" Shank length, 2-Flute Carbide Tipped more info
Cove & Bead 1/2" Shank Diameter Router Bit 1-1/2" Shank Length, 2-Flute Carbide Tipped Cove & Bead 1/4" Shank Diameter Router Bit 1-1/4" Shank Length, 2-Flute Carbide Tipped Cove & Bead Plunge Router Bit 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped

1-1/2" Shank Length, 2-Flute Carbide Tipped more info

1-1/4" Shank Length, 2-Flute Carbide Tipped more info

1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped more info
Cove Carbide Tipped Router Bit 2-Flute Carbide Tipped Deep Classic Point Router Bit 2-Flute Carbide Tipped Large Cove Classic Plunge Router Bit 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info

1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped more info
Matching Corner Round/Cove Router Bit 2-Flute Carbide Tipped Shallow Classic Point Router Bit 2-Flute Carbide Tipped Special Cove Carbide Tipped Router Bit 2-Flute Carbide Tipped

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 1022 Cove Carbide Tipped Router Bit - 1/8" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 5/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1022 Cove Carbide Tipped Router Bit - 1/8" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 5/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $15.05
Our Price: $13.68
Savings: $1.37
Qty Add
MAGNATE 1023 Cove Carbide Tipped Router Bit - 3/16" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 3/4" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1023 Cove Carbide Tipped Router Bit - 3/16" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 3/4" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.87
Our Price: $15.34
Savings: $1.53
Qty Add
MAGNATE 1001 Cove Carbide Tipped Router Bit - 1/4" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 7/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1001 Cove Carbide Tipped Router Bit - 1/4" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 7/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.01
Our Price: $18.19
Savings: $1.82
Qty Add
MAGNATE 1004 Cove Carbide Tipped Router Bit - 1/4" Radius; 1/2" Shank Diameter; 3/8" Cutting Length; 7/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1004 Cove Carbide Tipped Router Bit - 1/4" Radius; 1/2" Shank Diameter; 3/8" Cutting Length; 7/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.12
Our Price: $18.29
Savings: $1.83
Qty Add
MAGNATE 1021 Cove Carbide Tipped Router Bit - 5/16" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1021 Cove Carbide Tipped Router Bit - 5/16" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.54
Our Price: $20.49
Savings: $2.05
Qty Add
MAGNATE 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.69
Our Price: $21.54
Savings: $2.15
Qty Add
MAGNATE 3605 Cove & Bead 1/4" Shank Diameter Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3605 Cove & Bead 1/4" Shank Diameter Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.86
Our Price: $21.69
Savings: $2.17
Qty Add
MAGNATE 1002 Cove Carbide Tipped Router Bit - 3/8" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1002 Cove Carbide Tipped Router Bit - 3/8" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.02
Our Price: $21.84
Savings: $2.18
Qty Add
MAGNATE 1005 Cove Carbide Tipped Router Bit - 3/8" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1005 Cove Carbide Tipped Router Bit - 3/8" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.81
Our Price: $22.55
Savings: $2.26
Qty Add
MAGNATE 4701 Classic Cove Router Bit - 5/32" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4701 Classic Cove Router Bit - 5/32" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.29
Our Price: $22.99
Savings: $2.30
Qty Add
MAGNATE 3603 Cove & Bead 1/4" Shank Diameter Router Bit - 5/32", 5/32" Radius (Bead, Cove); 1/2" Cutting Height; 1-1/8" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3603 Cove & Bead 1/4" Shank Diameter Router Bit - 5/32", 5/32" Radius (Bead, Cove); 1/2" Cutting Height; 1-1/8" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $25.88
Our Price: $23.53
Savings: $2.35
Qty Add
MAGNATE S4701 Classic Cove Router Bit - 5/32" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE S4701 Classic Cove Router Bit - 5/32" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.13
Our Price: $23.75
Savings: $2.38
Qty Add
MAGNATE 1003 Cove Carbide Tipped Router Bit - 1/2" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1003 Cove Carbide Tipped Router Bit - 1/2" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/4" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.38
Our Price: $23.98
Savings: $2.40
Qty Add
MAGNATE 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter; 1/4" Shank Diameter, 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.42
Our Price: $24.02
Savings: $2.40
Qty Add
MAGNATE 4761 Special Cove Carbide Tipped Router Bit - 3/16" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4761 Special Cove Carbide Tipped Router Bit - 3/16" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.76
Our Price: $24.33
Savings: $2.43
Qty Add
MAGNATE 3606 Cove & Bead 1/4" Shank Diameter Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3606 Cove & Bead 1/4" Shank Diameter Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.02
Our Price: $25.47
Savings: $2.55
Qty Add
MAGNATE 4766 Special Cove Carbide Tipped Router Bit - 3/16" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-3/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4766 Special Cove Carbide Tipped Router Bit - 3/16" Radius; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/8" Overall Diameter; 1-3/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.28
Our Price: $25.71
Savings: $2.57
Qty Add
MAGNATE 1006 Cove Carbide Tipped Router Bit - 1/2" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1006 Cove Carbide Tipped Router Bit - 1/2" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $28.69
Our Price: $26.08
Savings: $2.61
Qty Add
MAGNATE 4702 Classic Cove Router Bit - 1/4" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4702 Classic Cove Router Bit - 1/4" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $30.86
Our Price: $28.05
Savings: $2.81
Qty Add
MAGNATE 1287 Matching Corner Round/Cove Router Bit - 1/4" Radius; 1/4" Shank Diameter; 17/32" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1287 Matching Corner Round/Cove Router Bit - 1/4" Radius; 1/4" Shank Diameter; 17/32" Cutting Length; 1-1/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.21
Our Price: $28.37
Savings: $2.84
Qty Add
MAGNATE 4763 Special Cove Carbide Tipped Router Bit - 5/16" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4763 Special Cove Carbide Tipped Router Bit - 5/16" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.25
Our Price: $28.41
Savings: $2.84
Qty Add
MAGNATE S4702 Classic Cove Router Bit - 1/4" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE S4702 Classic Cove Router Bit - 1/4" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.67
Our Price: $28.79
Savings: $2.88
Qty Add
MAGNATE 3601 Cove & Bead 1/4" Shank Diameter Router Bit - 3/16", 1/4" Radius (Bead, Cove); 5/8" Cutting Height; 1-5/16" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3601 Cove & Bead 1/4" Shank Diameter Router Bit - 3/16", 1/4" Radius (Bead, Cove); 5/8" Cutting Height; 1-5/16" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.80
Our Price: $28.91
Savings: $2.89
Qty Add
MAGNATE 4703 Classic Cove Router Bit - 5/16" Radius; 1/4" Shank Diameter; 11/16" Cutting Length; 1-1/2" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4703 Classic Cove Router Bit - 5/16" Radius; 1/4" Shank Diameter; 11/16" Cutting Length; 1-1/2" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.10
Our Price: $29.18
Savings: $2.92
Qty Add
MAGNATE S4703 Classic Cove Router Bit - 5/16" Radius; 1/2" Shank Diameter; 11/16" Cutting Length; 1-1/2" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE S4703 Classic Cove Router Bit - 5/16" Radius; 1/2" Shank Diameter; 11/16" Cutting Length; 1-1/2" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.64
Our Price: $29.67
Savings: $2.97
Qty Add
MAGNATE 3602 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/16", 1/4" Radius (Bead, Cove); 5/8" Cutting Height; 1-5/16" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3602 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/16", 1/4" Radius (Bead, Cove); 5/8" Cutting Height; 1-5/16" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.70
Our Price: $29.73
Savings: $2.97
Qty Add
MAGNATE 4768 Special Cove Carbide Tipped Router Bit - 5/16" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-3/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4768 Special Cove Carbide Tipped Router Bit - 5/16" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 1-3/8" Overall Diameter; 1-3/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.07
Our Price: $30.06
Savings: $3.01
Qty Add
MAGNATE 4823 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1" Cutting Height; 3/8", 3/8" Radius (Bead, Cove); 1" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
MAGNATE 4823 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1" Cutting Height; 3/8", 3/8" Radius (Bead, Cove); 1" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.09
Our Price: $30.08
Savings: $3.01
Qty Add
MAGNATE 1007 Cove Carbide Tipped Router Bit - 5/8" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
MAGNATE 1007 Cove Carbide Tipped Router Bit - 5/8" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-02 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $34.78
Our Price: $31.62
Savings: $3.16
Qty Add
MAGNATE 4704 Classic Cove Router Bit - 3/8" Radius; 1/4" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 4704 Classic Cove Router Bit - 3/8" Radius; 1/4" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.21
Our Price: $32.01
Savings: $3.20
Qty Add
MAGNATE 1288 Matching Corner Round/Cove Router Bit - 5/16" Radius; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1288 Matching Corner Round/Cove Router Bit - 5/16" Radius; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.57
Our Price: $32.34
Savings: $3.23
Qty Add
MAGNATE S4704 Classic Cove Router Bit - 3/8" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE S4704 Classic Cove Router Bit - 3/8" Radius; 1/2" Shank Diameter; 3/4" Cutting Length; 1-5/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.99
Our Price: $32.72
Savings: $3.27
Qty Add
MAGNATE 4824 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1" Cutting Height; 9/64", 5/8" Radius (Bead, Cove); 1" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
MAGNATE 4824 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1" Cutting Height; 9/64", 5/8" Radius (Bead, Cove); 1" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $36.28
Our Price: $32.98
Savings: $3.30
Qty Add
MAGNATE 3607 Cove & Bead 1/4" Shank Diameter Router Bit - 1/4", 1/4" Radius (Bead, Cove); 11/16" Cutting Height; 1-1/2" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3607 Cove & Bead 1/4" Shank Diameter Router Bit - 1/4", 1/4" Radius (Bead, Cove); 11/16" Cutting Height; 1-1/2" Overall Diameter; BR-03 Bearing; 1-1/4" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $36.31
Our Price: $33.01
Savings: $3.30
Qty Add
MAGNATE 3608 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 1/4", 1/4" Radius (Bead, Cove); 11/16" Cutting Height; 1-1/2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3608 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 1/4", 1/4" Radius (Bead, Cove); 11/16" Cutting Height; 1-1/2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $36.31
Our Price: $33.01
Savings: $3.30
Qty Add
MAGNATE 3604 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/16", 5/16" Radius (Bead, Cove); 3/4" Cutting Height; 1-1/2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3604 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/16", 5/16" Radius (Bead, Cove); 3/4" Cutting Height; 1-1/2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $38.53
Our Price: $35.03
Savings: $3.50
Qty Add
MAGNATE S4705 Classic Cove Router Bit - 1/2" Radius; 1/2" Shank Diameter; 7/8" Cutting Length; 1-3/4" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE S4705 Classic Cove Router Bit - 1/2" Radius; 1/2" Shank Diameter; 7/8" Cutting Length; 1-3/4" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $40.95
Our Price: $37.23
Savings: $3.72
Qty Add
MAGNATE 1289 Matching Corner Round/Cove Router Bit - 3/8" Radius; 1/4" Shank Diameter; 25/32" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 1289 Matching Corner Round/Cove Router Bit - 3/8" Radius; 1/4" Shank Diameter; 25/32" Cutting Length; 1-3/8" Overall Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $41.66
Our Price: $37.87
Savings: $3.79
Qty Add
MAGNATE 1008 Cove Carbide Tipped Router Bit - 3/4" Radius; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
MAGNATE 1008 Cove Carbide Tipped Router Bit - 3/4" Radius; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $42.66
Our Price: $38.78
Savings: $3.88
Qty Add
MAGNATE 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.07
Our Price: $40.06
Savings: $4.01
Qty Add
MAGNATE 3609 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/8", 3/8" Radius (Bead, Cove); 1" Cutting Height; 2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3609 Cove & Bead 1/2" Shank Diameter Router Bit With Magnate BR-03 bearing - 3/8", 3/8" Radius (Bead, Cove); 1" Cutting Height; 2" Overall Diameter; 1-1/2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $44.59
Our Price: $40.54
Savings: $4.05
Qty Add
MAGNATE 4828 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1-7/16" Cutting Height; 3/8", 3/8" Radius (Bead, Cove); 1-1/4" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
MAGNATE 4828 Bead & Cove 1/2" Shank Router Bit, 1-1/2" Shank Length - 1-7/16" Cutting Height; 3/8", 3/8" Radius (Bead, Cove); 1-1/4" Overall Diameter; BR-03 Bearing; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $46.63
Our Price: $42.39
Savings: $4.24
Qty Add
MAGNATE 1024 Cove Carbide Tipped Router Bit - 7/8" Radius; 1/2" Shank Diameter; 1" Cutting Length; 2-1/4" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
MAGNATE 1024 Cove Carbide Tipped Router Bit - 7/8" Radius; 1/2" Shank Diameter; 1" Cutting Length; 2-1/4" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $49.15
Our Price: $44.68
Savings: $4.47
Qty Add
MAGNATE 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $54.27
Our Price: $49.34
Savings: $4.93
Qty Add
MAGNATE 1009 Cove Carbide Tipped Router Bit - 1" Radius; 1/2" Shank Diameter; 1-1/8" Cutting Length; 2-1/2" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
MAGNATE 1009 Cove Carbide Tipped Router Bit - 1" Radius; 1/2" Shank Diameter; 1-1/8" Cutting Length; 2-1/2" Overall Diameter; 1-1/2" Shank Length; Comes with a Magnate BR-03 bearing.; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $56.16
Our Price: $51.05
Savings: $5.11
Qty Add
MAGNATE 3942 Large Cove Classic Plunge Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/4", 1" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
MAGNATE 3942 Large Cove Classic Plunge Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/4", 1" Radius (Bead, Cove); 1/2" Shank Diameter, 2" Shank Length, 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $63.60
Our Price: $57.82
Savings: $5.78
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>