Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Solid Carbide
We found 82 results matching your criteria.
Z Flute Straight 1 Flute Router Bit Solid Carbide, For Plastic or Solid Woods Z-Flute Straight, Flat Bottom Veining Router Bit 2 Flute, Solid Carbide For Plastic or Solid Woods Z Flute Straight 2 Flute Router Bit Solid Carbide, For Plastic or Solid Woods

Solid Carbide, For Plastic or Solid Woods more info

2 Flute, Solid Carbide For Plastic or Solid Woods more info

Solid Carbide, For Plastic or Solid Woods more info
V-Grooving Solid Carbide Router Bit 1/4" Shank Diameter Leining/Liner Bit For Carving Machine 1/4" Shank Diameter, 1-Flute Solid Carbide Round Bottom Veining 1 Flute Router Bit 1/4" Shank Diameter Solid Carbide

1/4" Shank Diameter more info

1/4" Shank Diameter, 1-Flute Solid Carbide more info

1/4" Shank Diameter Solid Carbide more info
Round Bottom Veining, 2 Flute Router Bit 1/4" Shank Solid Carbide Flush Trim Solid Carbide Router Bit 2 Flute Flush Trim Double Ended Router Bit 2-Flute Micrfograin Solid Carbide

1/4" Shank Solid Carbide more info

2 Flute more info

2-Flute Micrfograin Solid Carbide more info
Hole & Flush Trim Router Bit Solid Carbide, 2 Flute 7 Degree Bevel Trim Router Bit 2 Flute Micrograin Solid Carbide 7 Degree Bevel Trim Left Rotation Router Bit 2 Flute Solid Carbide

Solid Carbide, 2 Flute more info

2 Flute Micrograin Solid Carbide more info

2 Flute Solid Carbide more info
7 Degree Bevel Trim Router Bit Micrograin Solid Carbide, 2 Flute Double Ended 7 Degree Bevel Trim Router Bit, Small Pilot for Shallow Dado 2 Flute Solid Carbide Flush & 7 Degree Bevel Trim Router Bit 2-Flute Solid Carbide

Micrograin Solid Carbide, 2 Flute Double Ended more info

2 Flute Solid Carbide more info

2-Flute Solid Carbide more info
7.5 Degree Dovetail Router Bit For Incra/Omni Jig 2-Flute Micrograin Solid Carbide End Mill Fiberglass Router Bit Solid Carbide V-Point Plunge Fiberglass Router Bit Solid Carbide

2-Flute Micrograin Solid Carbide more info

Solid Carbide more info

Solid Carbide more info
Ripping & Slotting Router Bit Micrograin Solid Carbide

Micrograin Solid Carbide more info
Sort By:
Page of 1
Magnate 5211 Flush & 7 Degree Bevel Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2-Flute Solid Carbide
Magnate 5211 Flush & 7 Degree Bevel Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.00
Our Price: $11.20
Savings: $2.80
Qty Add
Magnate 5146 Flat Bottom Veining Router Bits - 1/8" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length
Magnate 5146 Flat Bottom Veining Router Bits - 1/8" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length
more info
Our Price: $11.58
Qty Add
Magnate 1936 Z Flute Straight 2 Flute Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1936 Z Flute Straight 2 Flute Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.88
Our Price: $11.90
Savings: $2.98
Qty Add
Magnate 5101 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute
Magnate 5101 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $17.58
Our Price: $14.07
Savings: $3.51
Qty Add
Magnate 5181 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; AKA DADO Trim Bit, comes with Small Pilot for Shallow Dado; 2 Flute
Magnate 5181 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; AKA DADO Trim Bit, comes with Small Pilot for Shallow Dado; 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $18.13
Our Price: $14.50
Savings: $3.63
Qty Add
Magnate 768 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 2" Overall Length; 1/4" Shank Diameter
Magnate 768 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 2" Overall Length; 1/4" Shank Diameter
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $6.55
Our Price: $15.31
Qty Add
Magnate 5143 Flat Bottom Veining Router Bits - 3/32" Cutting Diameter; 3/16" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length
Magnate 5143 Flat Bottom Veining Router Bits - 3/32" Cutting Diameter; 3/16" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length
more info
Our Price: $15.42
Qty Add
Magnate 1989 Z Flute Straight 1 Flute Router Bit - 5/32" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length
Magnate 1989 Z Flute Straight 1 Flute Router Bit - 5/32" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length
Designed for solid woods, wood composites, acrylics, plastics, and solid surface. This bit is to provide fast, free cutting and long edge life. more info
Our Price: $15.81
Qty Add
Magnate 765 V-Grooving Solid Carbide Router Bit - 3 Flute; 90 Degree; 1/4" Cutting Diameter; 1/8" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Magnate 765 V-Grooving Solid Carbide Router Bit - 3 Flute; 90 Degree; 1/4" Cutting Diameter; 1/8" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $6.60
Our Price: $15.82
Qty Add
Magnate 5103 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute
Magnate 5103 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.02
Our Price: $16.02
Savings: $4.00
Qty Add
Magnate 5201 7 Degree Bevel Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Micrograin Solid Carbide
Magnate 5201 7 Degree Bevel Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Micrograin Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.02
Our Price: $16.02
Savings: $4.00
Qty Add
Magnate 5231 7 Degree Bevel Trim Left Rotation Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Solid Carbide
Magnate 5231 7 Degree Bevel Trim Left Rotation Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.65
Our Price: $16.52
Savings: $4.13
Qty Add
Magnate 5102 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; 2 Flute
Magnate 5102 Flush Trim Solid Carbide Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $20.69
Our Price: $16.55
Savings: $4.14
Qty Add
Magnate 5241 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 5/16" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, 2 Flute
Magnate 5241 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 5/16" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $21.06
Our Price: $16.85
Savings: $4.21
Qty Add
Magnate 1935 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1935 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $21.73
Our Price: $17.38
Savings: $4.35
Qty Add
Magnate 1931 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1931 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $21.87
Our Price: $17.50
Savings: $4.37
Qty Add
Magnate 5156 Ripping & Slotting Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Micrograin Solid Carbide
Magnate 5156 Ripping & Slotting Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Micrograin Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.38
Our Price: $17.90
Savings: $4.48
Qty Add
Magnate 1949 Z-Flute Straight, Flat Bottom Veining Router Bit - 3/32" Cutting Diameter; 3/16" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods
Magnate 1949 Z-Flute Straight, Flat Bottom Veining Router Bit - 3/32" Cutting Diameter; 3/16" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods
Magnate 1949 Z-Flute Straight, Flat Bottom Veining Router Bit - 3/32" Cutting Diameter; 3/16" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods

This bit provides fast, free cutting and long edge life in harder materials like solid woods, wood composites, acrylics, plastics and solid surface.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $20.55
Our Price: $18.50
Savings: $2.05
Qty Add
Magnate 5242 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, 2 Flute
Magnate 5242 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $23.33
Our Price: $18.67
Savings: $4.66
Qty Add
Magnate 1948 Z-Flute Straight, Flat Bottom Veining Router Bit - 1/8" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods
Magnate 1948 Z-Flute Straight, Flat Bottom Veining Router Bit - 1/8" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods
Magnate 1948 Z-Flute Straight, Flat Bottom Veining Router Bit - 1/8" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; 2 Flute, Solid Carbide For Plastic or Solid Woods

This bit provides fast, free cutting and long edge life in harder materials like solid woods, wood composites, acrylics, plastics and solid surface.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $26.10
Our Price: $20.88
Savings: $5.22
Qty Add
Magnate 1933 Z Flute Straight 2 Flute Router Bit - 5/32" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1933 Z Flute Straight 2 Flute Router Bit - 5/32" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.75
Our Price: $21.40
Savings: $5.35
Qty Add
Magnate 5243 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, 2 Flute
Magnate 5243 Hole & Flush Trim Router Bit - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, 2 Flute
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $26.90
Our Price: $21.52
Savings: $5.38
Qty Add
Magnate 1930 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1930 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $27.46
Our Price: $21.97
Savings: $5.49
Qty Add
Magnate 5281 7 Degree Bevel Trim Router Bit, Small Pilot for Shallow Dado - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Solid Carbide
Magnate 5281 7 Degree Bevel Trim Router Bit, Small Pilot for Shallow Dado - 1/4" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; 2 Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.48
Our Price: $23.58
Savings: $5.90
Qty Add
Magnate 1939 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1939 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.50
Our Price: $23.60
Savings: $5.90
Qty Add
Magnate 1934 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1934 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $29.65
Our Price: $23.72
Savings: $5.93
Qty Add
Magnate 5161 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Magnate 5161 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $30.67
Our Price: $24.53
Savings: $6.14
Qty Add
Magnate 5264 7.5 Degree Dovetail Router Bit For Incra/Omni Jig - 7-1/2 Degree; 1/4" Cutting Diameter; 5/16" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Micrograin Solid Carbide
Magnate 5264 7.5 Degree Dovetail Router Bit For Incra/Omni Jig - 7-1/2 Degree; 1/4" Cutting Diameter; 5/16" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2-Flute Micrograin Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $30.90
Our Price: $24.72
Savings: $6.18
Qty Add
Magnate 1932 Z Flute Straight 2 Flute Router Bit - 5/32" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1932 Z Flute Straight 2 Flute Router Bit - 5/32" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.63
Our Price: $25.30
Savings: $6.33
Qty Add
Magnate 1954 Z Flute Straight 1 Flute Router Bit - 3/16" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1954 Z Flute Straight 1 Flute Router Bit - 3/16" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.90
Our Price: $25.52
Savings: $6.38
Qty Add
Magnate 1955 Z Flute Straight 1 Flute Router Bit - 3/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1955 Z Flute Straight 1 Flute Router Bit - 3/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.90
Our Price: $25.52
Savings: $6.38
Qty Add
Magnate 1952 Z Flute Straight 1 Flute Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1952 Z Flute Straight 1 Flute Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.90
Our Price: $25.52
Savings: $6.38
Qty Add
Magnate 1985 Z Flute Straight 1 Flute Router Bit - 3/32" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1985 Z Flute Straight 1 Flute Router Bit - 3/32" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.92
Our Price: $25.53
Savings: $6.39
Qty Add
Magnate 1986 Z Flute Straight 1 Flute Router Bit - 5/32" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1986 Z Flute Straight 1 Flute Router Bit - 5/32" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $31.92
Our Price: $25.53
Savings: $6.39
Qty Add
Magnate 1956 Z Flute Straight 1 Flute Router Bit - 1/16" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1956 Z Flute Straight 1 Flute Router Bit - 1/16" Cutting Diameter; 1/4" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.67
Our Price: $26.06
Qty Add
Magnate 5164 V-Grooving Solid Carbide Router Bit - 2 Flute; 90 Degree; 1/4" Cutting Diameter; 1/8" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Magnate 5164 V-Grooving Solid Carbide Router Bit - 2 Flute; 90 Degree; 1/4" Cutting Diameter; 1/8" Cutting Height; 1-1/2" Overall Length; 1/4" Shank Diameter
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.60
Our Price: $26.08
Savings: $6.52
Qty Add
Magnate 1970 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Magnate 1970 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $32.94
Our Price: $26.35
Savings: $6.59
Qty Add
Magnate 1937 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1937 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.08
Our Price: $26.47
Savings: $6.61
Qty Add
Magnate 1950 Z Flute Straight 1 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1950 Z Flute Straight 1 Flute Router Bit - 1/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 1-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.42
Our Price: $26.73
Savings: $6.69
Qty Add
Magnate 1951 Z Flute Straight 1 Flute Router Bit - 1/4" Cutting Diameter; 7/8" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1951 Z Flute Straight 1 Flute Router Bit - 1/4" Cutting Diameter; 7/8" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.52
Our Price: $26.82
Savings: $6.70
Qty Add
Magnate 1971 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; Left Hand Rotation; 1/4" Shank Diameter, 1-Flute Solid Carbide
Magnate 1971 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; Left Hand Rotation; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.54
Our Price: $26.83
Savings: $6.71
Qty Add
Magnate 5301 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5301 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.60
Our Price: $26.88
Savings: $6.72
Qty Add
Magnate 5302 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5302 Z Flute Straight 2 Flute Router Bit - 3/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.60
Our Price: $26.88
Savings: $6.72
Qty Add
Magnate 5300 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5300 Z Flute Straight 2 Flute Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $33.60
Our Price: $26.88
Savings: $6.72
Qty Add
Magnate 5132 Round Bottom Veining, 2 Flute Router Bit - 1/8" Radius; 1/4" Cutting Diameter; 3/8" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Magnate 5132 Round Bottom Veining, 2 Flute Router Bit - 1/8" Radius; 1/4" Cutting Diameter; 3/8" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.23
Our Price: $28.18
Savings: $7.05
Qty Add
Magnate 5136 Round Bottom Veining, 2 Flute Router Bit - 1/16" Radius; 1/8" Cutting Diameter; 5/16" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Magnate 5136 Round Bottom Veining, 2 Flute Router Bit - 1/16" Radius; 1/8" Cutting Diameter; 5/16" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.23
Our Price: $28.18
Savings: $7.05
Qty Add
Magnate 5192 Round Bottom Veining 1 Flute Router Bit - 1/8" Radius; 1/4" Cutting Diameter; 1/4" Cutting Length; 2" Overall Length; 1/4" Shank Diameter Solid Carbide
Magnate 5192 Round Bottom Veining 1 Flute Router Bit - 1/8" Radius; 1/4" Cutting Diameter; 1/4" Cutting Length; 2" Overall Length; 1/4" Shank Diameter Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.23
Our Price: $28.18
Savings: $7.05
Qty Add
Magnate 5196 Round Bottom Veining 1 Flute Router Bit - 1/16" Radius; 1/8" Cutting Diameter; 1/4" Cutting Length; 1-1/2" Overall Length; 1/4" Shank Diameter Solid Carbide
Magnate 5196 Round Bottom Veining 1 Flute Router Bit - 1/16" Radius; 1/8" Cutting Diameter; 1/4" Cutting Length; 1-1/2" Overall Length; 1/4" Shank Diameter Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.23
Our Price: $28.18
Savings: $7.05
Qty Add
Magnate 5134 Round Bottom Veining, 2 Flute Router Bit - 3/32" Radius; 3/16" Cutting Diameter; 3/8" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Magnate 5134 Round Bottom Veining, 2 Flute Router Bit - 3/32" Radius; 3/16" Cutting Diameter; 3/8" Cutting Length; 2" Overall Length; 1/4" Shank Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.23
Our Price: $28.18
Savings: $7.05
Qty Add
Magnate 1947 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1947 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.29
Our Price: $28.23
Savings: $7.06
Qty Add
Magnate 5303 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 7/8" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5303 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 7/8" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $35.29
Our Price: $28.23
Savings: $7.06
Qty Add
Magnate 1953 Z Flute Straight 1 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1953 Z Flute Straight 1 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $37.35
Our Price: $29.88
Savings: $7.47
Qty Add
Magnate 1938 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1938 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $38.33
Our Price: $30.67
Savings: $7.66
Qty Add
Magnate 5171 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, Medium Burr
Magnate 5171 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $41.52
Our Price: $33.22
Savings: $8.30
Qty Add
Magnate 5304 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1-1/4" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5304 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 1-1/4" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $42.35
Our Price: $33.88
Savings: $8.47
Qty Add
Magnate 5163 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 2-1/2" Overall Length; 1/4" Shank Diameter
Magnate 5163 V-Grooving Solid Carbide Router Bit - 2 Flute; 60 Degree; 1/4" Cutting Diameter; 7/32" Cutting Height; 2-1/2" Overall Length; 1/4" Shank Diameter
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $42.35
Our Price: $33.88
Savings: $8.47
Qty Add
Magnate 5172 V-Point Plunge Fiberglass Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide
Magnate 5172 V-Point Plunge Fiberglass Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 2-1/2" Overall Length; Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $43.79
Our Price: $35.03
Savings: $8.76
Qty Add
Magnate 1972 Veining/Liner Bit for Carving Machine - 1/16" Tip; 15 Degree; 1/2" Cutting Height; 2-1/2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Magnate 1972 Veining/Liner Bit for Carving Machine - 1/16" Tip; 15 Degree; 1/2" Cutting Height; 2-1/2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $51.50
Our Price: $41.20
Savings: $10.30
Qty Add
Magnate 1940 Z Flute Straight 2 Flute Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 5/16" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1940 Z Flute Straight 2 Flute Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 5/16" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $58.50
Our Price: $46.80
Savings: $11.70
Qty Add
Magnate 1958 Z Flute Straight 1 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1958 Z Flute Straight 1 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $59.12
Our Price: $47.30
Savings: $11.82
Qty Add
Magnate 1941 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1941 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $61.81
Our Price: $49.45
Savings: $12.36
Qty Add
Magnate 5305 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5305 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $62.75
Our Price: $50.20
Savings: $12.55
Qty Add
Magnate 1942 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1942 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Length; 3/8" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $65.13
Our Price: $52.10
Savings: $13.03
Qty Add
Magnate 5170 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, Medium Burr
Magnate 5170 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 3" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $68.29
Our Price: $54.63
Savings: $13.66
Qty Add
Magnate 5309 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-1/8" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5309 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-1/8" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $82.79
Our Price: $66.23
Savings: $16.56
Qty Add
Magnate 1959 Z Flute Straight 1 Flute Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1959 Z Flute Straight 1 Flute Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $87.65
Our Price: $70.12
Savings: $17.53
Qty Add
Magnate 5177 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 2" Cutting Length; 1/4" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Magnate 5177 Fiberglass with End-Mill Point Router Bit - 1/4" Cutting Diameter; 2" Cutting Length; 1/4" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $90.81
Our Price: $72.65
Savings: $18.16
Qty Add
Magnate 1943 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1943 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $92.27
Our Price: $73.82
Savings: $18.45
Qty Add
Magnate 1944 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1944 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $94.04
Our Price: $75.23
Savings: $18.81
Qty Add
Magnate 5173 Fiberglass with End-Mill Point Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, Medium Burr
Magnate 5173 Fiberglass with End-Mill Point Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $97.31
Our Price: $77.85
Savings: $19.46
Qty Add
Magnate 5174 V-Point Plunge Fiberglass Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide
Magnate 5174 V-Point Plunge Fiberglass Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length; Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $98.52
Our Price: $78.82
Savings: $19.70
Qty Add
Magnate 5306 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5306 Z Flute Straight 2 Flute Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $108.87
Our Price: $87.10
Savings: $21.77
Qty Add
Magnate 5307 Z Flute Straight 2 Flute Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5307 Z Flute Straight 2 Flute Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $108.87
Our Price: $87.10
Savings: $21.77
Qty Add
Magnate 1945 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-5/8" Cutting Length; 1/2" Shank Diameter; 3-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1945 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-5/8" Cutting Length; 1/2" Shank Diameter; 3-1/2" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $111.69
Our Price: $89.35
Savings: $22.34
Qty Add
Magnate 5310 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-3/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5310 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 1-3/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $117.60
Our Price: $94.08
Savings: $23.52
Qty Add
Magnate 1957 Z Flute Straight 1 Flute Router Bit - 1/2" Cutting Diameter; 1-3/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1957 Z Flute Straight 1 Flute Router Bit - 1/2" Cutting Diameter; 1-3/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $120.46
Our Price: $96.37
Savings: $24.09
Qty Add
Magnate 5308 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 5308 Z Flute Straight 2 Flute Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $121.04
Our Price: $96.83
Savings: $24.21
Qty Add
Magnate 5175 Fiberglass with End-Mill Point Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, Medium Burr
Magnate 5175 Fiberglass with End-Mill Point Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $122.29
Our Price: $97.83
Savings: $24.46
Qty Add
Magnate 1946 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Magnate 1946 Z Flute Straight 2 Flute Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, For Plastic or Solid Woods
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $130.79
Our Price: $104.63
Savings: $26.16
Qty Add
Magnate 5176 V-Point Plunge Fiberglass Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide
Magnate 5176 V-Point Plunge Fiberglass Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $131.21
Our Price: $104.97
Savings: $26.24
Qty Add
Magnate 5178 Fiberglass with End-Mill Point Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 3/8" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Magnate 5178 Fiberglass with End-Mill Point Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 3/8" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $147.50
Our Price: $118.00
Savings: $29.50
Qty Add
Magnate 5179 Fiberglass with End-Mill Point Router Bit - 1/2" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Magnate 5179 Fiberglass with End-Mill Point Router Bit - 1/2" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Solid Carbide, Medium Burr
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $242.46
Our Price: $193.97
Savings: $48.49
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>