www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 154" Long > Carbon Steel Bandsaw Blade, 154" Long

We found 57 results matching your criteria.

Sort By:

Page of 1

Magnate M154C14R24 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R24 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R24 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.55

Our Price: $18.68

Savings: $1.87

Qty

Add

Magnate M154C14H4 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14H4 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14H4 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C14H6 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14H6 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14H6 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C14R10 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R10 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R10 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C14R14 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R14 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R14 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C14R18 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R18 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14R18 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C14W32 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14W32 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C14W32 Carbon Steel Bandsaw Blade, 154" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

List Price: $20.88

Our Price: $18.98

Savings: $1.90

Qty

Add

Magnate M154C38R24 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R24 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R24 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $21.25

Our Price: $19.32

Savings: $1.93

Qty

Add

Magnate M154C38H3 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H3 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H3 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38H4 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H4 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H4 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38H6 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H6 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38H6 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38R10 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R10 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R10 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38R14 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R14 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R14 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38R18 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R18 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R18 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C38R8 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R8 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C38R8 Carbon Steel Bandsaw Blade, 154" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.27

Our Price: $21.15

Savings: $2.12

Qty

Add

Magnate M154C316R10 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R10 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R10 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C316R14 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R14 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R14 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C316R18 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R18 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R18 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C316R24 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R24 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316R24 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C316S4 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316S4 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316S4 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C316H6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316H6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316H6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $23.93

Our Price: $21.75

Savings: $2.18

Qty

Add

Magnate M154C12H3 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H3 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H3 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12H4 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H4 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H4 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12H6 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H6 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12H6 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12R10 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R10 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R10 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12R14 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R14 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R14 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12R18 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R18 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R18 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12R24 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R24 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12R24 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C316S6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316S6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C316S6 Carbon Steel Bandsaw Blade, 154" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C12W32 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12W32 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C12W32 Carbon Steel Bandsaw Blade, 154" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $25.41

Our Price: $23.10

Savings: $2.31

Qty

Add

Magnate M154C58H4 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58H4 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58H4 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $28.24

Our Price: $25.67

Savings: $2.57

Qty

Add

Magnate M154C58R10 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58R10 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58R10 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $28.24

Our Price: $25.67

Savings: $2.57

Qty

Add

Magnate M154C18R14 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C18R14 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C18R14 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $29.98

Our Price: $27.25

Savings: $2.73

Qty

Add

Magnate M154C18R18 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C18R18 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C18R18 Carbon Steel Bandsaw Blade, 154" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $29.98

Our Price: $27.25

Savings: $2.73

Qty

Add

Magnate M154C34H2 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H2 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H2 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34H3 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H3 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H3 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34H4 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H4 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H4 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34H6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34H6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34R10 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R10 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R10 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34R14 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R14 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R14 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34R18 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R18 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R18 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34R6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R6 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C34R8 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R8 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C34R8 Carbon Steel Bandsaw Blade, 154" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C58H3 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58H3 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58H3 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C58R14 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58R14 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C58R14 Carbon Steel Bandsaw Blade, 154" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $30.17

Our Price: $27.43

Savings: $2.74

Qty

Add

Magnate M154C1R8 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

Magnate M154C1R8 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

12' 10" (12 feet 10 inch) Long, Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

List Price: $35.17

Our Price: $31.97

Savings: $3.20

Qty

Add

Magnate M154C1H6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $36.74

Our Price: $33.40

Savings: $3.34

Qty

Add

Magnate M154C1H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1H2 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H2 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H2 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1H3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H3 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1H4 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H4 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1H4 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1R10 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R10 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R10 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1R14 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R14 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R14 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C1R6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C1R6 Carbon Steel Bandsaw Blade, 154" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $37.51

Our Price: $34.10

Savings: $3.41

Qty

Add

Magnate M154C114H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C114H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C114H1.3 Carbon Steel Bandsaw Blade, 154" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $49.83

Our Price: $45.30

Savings: $4.53

Qty

Add

Magnate M154C112H1.15 Carbon Steel Bandsaw Blade, 154" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C112H1.15 Carbon Steel Bandsaw Blade, 154" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Magnate M154C112H1.15 Carbon Steel Bandsaw Blade, 154" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 12' 10" (12 feet 10 inch) Long

Cuts solid materials approximately 4" to 16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 154 inch (12 ft. 10 in.; 12' 10"; 12 pies 10 pulgadas; 154 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Wilton 8020FW-2 (Metal 150-1/2 to 156-1/2”); Wilton 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”); DoAll 2011; DoAll 2012 series; Doall 2013 series; DoAll 2613-H; DoAll C-912-A; DoAll C-912-M; DoAll C-10; Enco 1999110; HEM 1000; HEM 1000/1; HEM 1000-A; HEM 1000-AH; HEM H-100; HEM H-100-A; HEM H-100-M; HEM H-110; HEM H-110-A; HEM H-90-A; Wellsaw 54-G; MINIMAX MM16 16" 3.6-4.8 HP; Dake - Johnson V-20

List Price: $55.46

Our Price: $50.42

Savings: $5.04

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm.

However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 24 raker to cut 1/16" to 1/4" thick material,
* 18 raker to cut 1/8" to 3/8" thick material,
* 14 raker to cut 3/16" to 7/16" thick material,
* 10 raker to cut 1/4" to 5/8" thick material,
* 6 Hook to cut 3/8" to 2" thick material,
* 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material.

The following bandsaw models use 154 inch ( 12 ft. 10 inch, 12' 10" ) bandsaw blades.

Wilton® 20" 8020FW-2, 8020FW-4; JET VBS-2012 (150-1/2" to 156-1/2”). Doall 2013-V

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service