www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 167" Long > Bi-metal Bandsaw Blade, 167" Long

We found 46 results matching your criteria.

Sort By:

Page of 1

Magnate M167M12H4 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H4 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H4 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12H6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12V10 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V10 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V10 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12V14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12V6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V6 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12V8 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V8 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12V8 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M38V10 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38V10 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38V10 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M38V14 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38V14 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38V14 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12R14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R14 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M12R18 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R18 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R18 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $78.22

Our Price: $71.11

Savings: $7.11

Qty

Add

Magnate M167M14H6 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14H6 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14H6 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $81.31

Our Price: $73.92

Savings: $7.39

Qty

Add

Magnate M167M14V10 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14V10 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14V10 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $81.31

Our Price: $73.92

Savings: $7.39

Qty

Add

Magnate M167M14V14 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14V14 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M14V14 Bimetal Bandsaw Blade, 167" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $81.31

Our Price: $73.92

Savings: $7.39

Qty

Add

Magnate M167M38H4 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38H4 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M38H4 Bimetal Bandsaw Blade, 167" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $84.54

Our Price: $76.85

Savings: $7.69

Qty

Add

Magnate M167M34H3 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34H3 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34H3 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34V10 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V10 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V10 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34V4 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V4 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V4 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34V5 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V5 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V5 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34V6 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V6 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V6 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34V8 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V8 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34V8 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34W14 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34W14 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34W14 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M34W18 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34W18 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M34W18 Bimetal Bandsaw Blade, 167" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $87.00

Our Price: $79.09

Savings: $7.91

Qty

Add

Magnate M167M12R24 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R24 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12R24 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $88.62

Our Price: $80.56

Savings: $8.06

Qty

Add

Magnate M167M12H3 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H3 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M12H3 Bimetal Bandsaw Blade, 167" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $90.26

Our Price: $82.05

Savings: $8.21

Qty

Add

Magnate M167M58V10 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M58V10 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M58V10 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $94.82

Our Price: $86.20

Savings: $8.62

Qty

Add

Magnate M167M58V6 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M58V6 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M58V6 Bimetal Bandsaw Blade, 167" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $98.89

Our Price: $89.90

Savings: $8.99

Qty

Add

Magnate M167M1V10 Bimetal Bandsaw Blade, 167" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V10 Bimetal Bandsaw Blade, 167" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V10 Bimetal Bandsaw Blade, 167" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V2 Bimetal Bandsaw Blade, 167" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V2 Bimetal Bandsaw Blade, 167" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V2 Bimetal Bandsaw Blade, 167" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V4 Bimetal Bandsaw Blade, 167" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V4 Bimetal Bandsaw Blade, 167" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V4 Bimetal Bandsaw Blade, 167" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V5 Bimetal Bandsaw Blade, 167" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V5 Bimetal Bandsaw Blade, 167" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V5 Bimetal Bandsaw Blade, 167" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V6 Bimetal Bandsaw Blade, 167" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V6 Bimetal Bandsaw Blade, 167" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V6 Bimetal Bandsaw Blade, 167" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1V8 Bimetal Bandsaw Blade, 167" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V8 Bimetal Bandsaw Blade, 167" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1V8 Bimetal Bandsaw Blade, 167" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1W18 Bimetal Bandsaw Blade, 167" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1W18 Bimetal Bandsaw Blade, 167" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1W18 Bimetal Bandsaw Blade, 167" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $100.12

Our Price: $91.02

Savings: $9.10

Qty

Add

Magnate M167M1H3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1H3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M1H3 Bimetal Bandsaw Blade, 167" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $116.90

Our Price: $106.27

Savings: $10.63

Qty

Add

Magnate M167M114V2 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V2 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V2 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114V3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114V4 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V4 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V4 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114V5 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V5 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V5 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114V6 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V6 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V6 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114V8 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V8 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114V8 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $118.35

Our Price: $107.59

Savings: $10.76

Qty

Add

Magnate M167M114H3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114H3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M114H3 Bimetal Bandsaw Blade, 167" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $137.31

Our Price: $124.83

Savings: $12.48

Qty

Add

Magnate M167M112V2 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 2-3 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V2 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 2-3 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V2 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 2-3 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $143.29

Our Price: $130.26

Savings: $13.03

Qty

Add

Magnate M167M112V3 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 3-4 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V3 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 3-4 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V3 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 3-4 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $143.29

Our Price: $130.26

Savings: $13.03

Qty

Add

Magnate M167M112V4 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 4-6 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V4 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 4-6 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V4 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 4-6 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $143.29

Our Price: $130.26

Savings: $13.03

Qty

Add

Magnate M167M112V5 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 5-8 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V5 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 5-8 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Magnate M167M112V5 Bimetal Bandsaw Blade, 167" Long - 1-1/2" Width; 5-8 Variable Tooth; 0.050" Thickness; 13' 11" (13 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 167 inch (13 ft. 11 in.; 13' 11"; 13 pies 11 pulgadas; 167 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); Norwood HD36; Norwood HD36V2; Norwood HD38; Norwood MX34 (old); Norwood LM34; Frontier OS35; Hud-Son H360; Hud-Son HFE 30; Hud-Son HFE 36; Hud-Son Oscar 330; Hud-Son Oscar 336; Hud-Son Farmboss; Grizzly G0701X (166" to 168"); Kalamazoo 1220-D; Kalamazoo 1220-W; Kalamazoo 1220-WC; Kalamazoo 13-A; Kalamazoo 13-AW; Kalamazoo 13-AWSA; Kalamazoo H-12-B; Kalamazoo H-13-AD; Parkanson PK-380-A; Parkanson PK-380-SA; Peerless DCM-9

List Price: $143.29

Our Price: $130.26

Savings: $13.03

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 167 inch ( 13 ft. 11 inch, 13' 11" ) bandsaw blades.

Norwood Lumbermate Pro MX34 (old); Norwood LumberPro HD36; Grizzly® G0701X (166" -168")

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service