Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 132" Long > Bi-metal Bandsaw Blade, 132" Long
We found 42 results matching your criteria.


Sort By:
Page of 1
Magnate M132M12H4 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12H4 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12H4 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12H6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12H6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12H6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12V10 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V10 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V10 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12V14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12V6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V6 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12V8 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V8 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12V8 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M38V10 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38V10 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38V10 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M38V14 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38V14 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38V14 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12R14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12R14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12R14 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M12R18 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12R18 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M12R18 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $63.93
Our Price: $58.12
Savings: $5.81
Qty Add
Magnate M132M14H6 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14H6 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14H6 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $66.45
Our Price: $60.41
Savings: $6.04
Qty Add
Magnate M132M14V10 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14V10 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14V10 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $66.45
Our Price: $60.41
Savings: $6.04
Qty Add
Magnate M132M14V14 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14V14 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M14V14 Bimetal Bandsaw Blade, 132" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $66.45
Our Price: $60.41
Savings: $6.04
Qty Add
Magnate M132M38H4 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38H4 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long
Magnate M132M38H4 Bimetal Bandsaw Blade, 132" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $67.96
Our Price: $61.78
Savings: $6.18
Qty Add
Magnate M132M12R24 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 11' (11 feet) Long
Magnate M132M12R24 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 11' (11 feet) Long
Magnate M132M12R24 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.27
Our Price: $64.79
Savings: $6.48
Qty Add
Magnate M132M34H3 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34H3 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34H3 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34V10 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V10 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V10 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34V4 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V4 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V4 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34V5 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V5 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V5 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34V6 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V6 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V6 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34V8 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V8 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34V8 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34W14 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34W14 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34W14 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M34W18 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34W18 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M34W18 Bimetal Bandsaw Blade, 132" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $71.45
Our Price: $64.95
Savings: $6.50
Qty Add
Magnate M132M12H3 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M12H3 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M12H3 Bimetal Bandsaw Blade, 132" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $73.77
Our Price: $67.06
Savings: $6.71
Qty Add
Magnate M132M58V10 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M58V10 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M58V10 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $77.87
Our Price: $70.79
Savings: $7.08
Qty Add
Magnate M132M58V6 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M58V6 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M58V6 Bimetal Bandsaw Blade, 132" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $80.00
Our Price: $72.73
Savings: $7.27
Qty Add
Magnate M132M1V10 Bimetal Bandsaw Blade, 132" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V10 Bimetal Bandsaw Blade, 132" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V10 Bimetal Bandsaw Blade, 132" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V2 Bimetal Bandsaw Blade, 132" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V2 Bimetal Bandsaw Blade, 132" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V2 Bimetal Bandsaw Blade, 132" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V4 Bimetal Bandsaw Blade, 132" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V4 Bimetal Bandsaw Blade, 132" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V4 Bimetal Bandsaw Blade, 132" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V5 Bimetal Bandsaw Blade, 132" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V5 Bimetal Bandsaw Blade, 132" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V5 Bimetal Bandsaw Blade, 132" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V6 Bimetal Bandsaw Blade, 132" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V6 Bimetal Bandsaw Blade, 132" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V6 Bimetal Bandsaw Blade, 132" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1V8 Bimetal Bandsaw Blade, 132" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V8 Bimetal Bandsaw Blade, 132" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1V8 Bimetal Bandsaw Blade, 132" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1W18 Bimetal Bandsaw Blade, 132" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1W18 Bimetal Bandsaw Blade, 132" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1W18 Bimetal Bandsaw Blade, 132" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $81.76
Our Price: $74.33
Savings: $7.43
Qty Add
Magnate M132M1H3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1H3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long
Magnate M132M1H3 Bimetal Bandsaw Blade, 132" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $93.72
Our Price: $85.20
Savings: $8.52
Qty Add
Magnate M132M114V2 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V2 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V2 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114V3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114V4 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V4 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V4 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114V5 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V5 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V5 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114V6 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V6 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V6 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114V8 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V8 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114V8 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $96.29
Our Price: $87.54
Savings: $8.75
Qty Add
Magnate M132M114H3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114H3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 11' (11 feet) Long
Magnate M132M114H3 Bimetal Bandsaw Blade, 132" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 11' (11 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 132 inch (11 ft.; 11'; 11 pie; 132 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly 0592 (Metal-Cutting); GRIZZLY G4006; JET 17"; Jet HBS-10-HD; Jet HBS-916-SVS; Jet HBS-9-M; Jet MBS-10-M; LAGUNA LT16; SHOPFOX W1707; STAR MACHINERY HVBS916; Atlas 916-M; Atlas 9H-A; Clausing C-225-W; Clausing C-250-A; Cosen AH-1010-JAY; Cosen MH-1016-JA; Cosen MH-1016-JAM; Cosen MH-1016-JM; Cosen MH-916-JA; Cosen MH-916-JRP; Cosen SH-1016-JF; Cosen SH-1016-JYM; Cosen SH-916-JA; Cut King M-916; Cut King MH-916-SA; DoAll C-12; DoAll C-4; DoAll C-5-A; Ellis 1800; Fictitios abc; HEM 750; HEM 750-A; HEM H-75; HEM H-75-A; HEM H-75-M; Kalamazoo VS-20; Kalamazoo VS-36; Kasto Diagonal; Laidlaw JM-20; Laidlaw SM-20; Luxo LE-400; Luxo ME-400; Marvel 916-S; Milbrand-Thompson 12; Parkanson 250-CA; Parkanson 250-CSA; Parkanson 250-CM; Parks #2; Parks M-2; Peerless HB-1016; Peerless HB-1016-U; Peerless HB-816-U; Peerless HB-916-U; Pehaka USF-10; Qualters and Smith 6-B Autocut; Qualters and Smith QSB-7; Qualters and Smith QSB-7-A; Rockwell 180-A; Rockwell 20/920; Rockwell 20/950; Rockwell 20/951; Rockwell 7; Rockwell 7A; Sawmaster DY-400; Sawmaster DY-400-S; Sears Roebuck 2377; Startrite H-225-D; Startrite H-225-W; Tannewitz HBS-1010-AVS; Tannewitz HBS-1010-M; Tannewitz HBS-1010-VS more info
List Price: $109.95
Our Price: $99.95
Savings: $10.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 132 inch ( 11 ft., 11' ) bandsaw blades.

Laguna LT16; Grizzly 0592 (Metal-Cutting)