www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 130" Long

We found 120 results matching your criteria.

Carbon Steel Bandsaw Blade, 130" Long

Bi-metal Bandsaw Blade, 130" Long

Carbide Tipped Bandsaw Blade, 130" Long

Hawc Pro Resaw Bandsaw Blade, 130" Long 0.045" kerf, High Silcon Content For Woodcutting

Carbide Impregnated Bandsaw Blade, 130" Long 0.030" kerf, For Woodcutting

WoodSaver Plus Resaw Bandsaw Blade, 130" Long 0.030" kerf, Carbide Impregnated For Woodcutting

0.045" kerf, High Silcon Content For Woodcutting

0.030" kerf, For Woodcutting

0.030" kerf, Carbide Impregnated For Woodcutting

WoodSaver Resaw Bandsaw Blade, 130" Long 0.035" kerf, Carbide Impregnated For Woodcutting

Carbide Grit Gulleted Bandsaw Blade, 130" Long Med-Coarse, Cuts 1/4-in (6.4mm) or Thicker Abrasives and Hardened Material, NOT for Wood

Carbide Grit Continuous Bandsaw Blade, 130" Long Med-Coarse, It Cuts 1/4-in (6.4mm) or Thinner Abrasives and Hardened Material, NOT for Wood

0.035" kerf, Carbide Impregnated For Woodcutting

Med-Coarse, Cuts 1/4-in (6.4mm) or Thicker Abrasives and Hardened Material, NOT for Wood

Med-Coarse, It Cuts 1/4-in (6.4mm) or Thinner Abrasives and Hardened Material, NOT for Wood

Sort By:

Page of 2

Magnate M130C14R24 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R24 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R24 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.50

Our Price: $16.82

Savings: $1.68

Qty

Add

Magnate M130C14H4 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14H4 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14H4 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C14H6 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14H6 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14H6 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C14R10 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R10 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R10 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C14R14 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R14 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R14 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C14R18 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R18 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14R18 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C14W32 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14W32 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C14W32 Carbon Steel Bandsaw Blade, 130" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M130C38R24 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R24 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R24 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $19.14

Our Price: $17.40

Savings: $1.74

Qty

Add

Carbon Steel Bandsaw Blade, 130" Long , For Wood or Metal Cutting: M130C58H8

Carbon Steel Bandsaw Blade, 130" Long , For Wood or Metal Cutting: M130C58H8

5/8" Width; 8 Raker Tooth; 0.032" Thickness; 0.057" Kerf;

Our Price: $18.18

Qty

Add

Magnate M130C38H3 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H3 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H3 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38H4 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H4 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H4 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38H6 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H6 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38H6 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38R10 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R10 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R10 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38R14 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R14 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R14 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38R18 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R18 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R18 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C38R8 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R8 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C38R8 Carbon Steel Bandsaw Blade, 130" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M130C316R10 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R10 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R10 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C316R14 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R14 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R14 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C316R18 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R18 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R18 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C316R24 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R24 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316R24 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C316S4 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316S4 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316S4 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C316H6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316H6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316H6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M130C12H3 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H3 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H3 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12H4 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H4 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H4 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12H6 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H6 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12H6 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12R10 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R10 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R10 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12R14 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R14 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R14 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12R18 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R18 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R18 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12R24 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R24 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12R24 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C316S6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316S6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C316S6 Carbon Steel Bandsaw Blade, 130" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C12W32 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12W32 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C12W32 Carbon Steel Bandsaw Blade, 130" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M130C58H4 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58H4 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58H4 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $25.26

Our Price: $22.96

Savings: $2.30

Qty

Add

Magnate M130C58R10 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58R10 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58R10 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $25.26

Our Price: $22.96

Savings: $2.30

Qty

Add

Magnate M130C34H2 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H2 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H2 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34H3 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H3 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H3 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34H4 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H4 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H4 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34H6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34H6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34R10 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R10 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R10 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34R14 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R14 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R14 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34R18 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R18 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R18 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34R6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R6 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C34R8 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R8 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C34R8 Carbon Steel Bandsaw Blade, 130" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C58H3 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58H3 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58H3 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C58R14 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58R14 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C58R14 Carbon Steel Bandsaw Blade, 130" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M130C18R14 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C18R14 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C18R14 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.76

Our Price: $24.33

Savings: $2.43

Qty

Add

Magnate M130C18R18 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C18R18 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C18R18 Carbon Steel Bandsaw Blade, 130" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $26.76

Our Price: $24.33

Savings: $2.43

Qty

Add

Magnate M130C1R8 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

Magnate M130C1R8 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

10' 10" (10 feet 10 inch) Long, Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

List Price: $30.72

Our Price: $27.93

Savings: $2.79

Qty

Add

Magnate M130C1H6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.09

Our Price: $29.17

Savings: $2.92

Qty

Add

Magnate M130C1H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1H2 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H2 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H2 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1H3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H3 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1H4 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H4 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1H4 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1R10 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R10 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R10 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1R14 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R14 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R14 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M130C1R6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C1R6 Carbon Steel Bandsaw Blade, 130" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

SuperCut B130G38H4 Carbide Impregnated Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G38H4 Carbide Impregnated Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G38H4 Carbide Impregnated Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1" to 2-1/2" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $41.23

Our Price: $37.48

Savings: $3.75

Qty

Add

SuperCut B130G12H3 Carbide Impregnated Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G12H3 Carbide Impregnated Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G12H3 Carbide Impregnated Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1-1/2" to 3" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $43.20

Our Price: $39.27

Savings: $3.93

Qty

Add

SuperCut B130G14H6 Carbide Impregnated Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G14H6 Carbide Impregnated Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G14H6 Carbide Impregnated Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

Cuts solid materials approximately 3/4" to 1-1/2" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $43.26

Our Price: $39.33

Savings: $3.93

Qty

Add

Magnate M130C114H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C114H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C114H1.3 Carbon Steel Bandsaw Blade, 130" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $43.37

Our Price: $39.43

Savings: $3.94

Qty

Add

Magnate M130C112H1.15 Carbon Steel Bandsaw Blade, 130" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C112H1.15 Carbon Steel Bandsaw Blade, 130" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130C112H1.15 Carbon Steel Bandsaw Blade, 130" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 4" to 16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $48.31

Our Price: $43.92

Savings: $4.39

Qty

Add

Magnate M130M12H4 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H4 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H4 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12H6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12V10 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V10 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V10 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12V14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12V6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V6 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12V8 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V8 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12V8 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M38V10 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38V10 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38V10 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M38V14 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38V14 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38V14 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12R14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R14 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M12R18 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R18 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R18 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $63.93

Our Price: $58.12

Savings: $5.81

Qty

Add

Magnate M130M14H6 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14H6 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14H6 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $66.45

Our Price: $60.41

Savings: $6.04

Qty

Add

Magnate M130M14V10 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14V10 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14V10 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $66.45

Our Price: $60.41

Savings: $6.04

Qty

Add

Magnate M130M14V14 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14V14 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M14V14 Bimetal Bandsaw Blade, 130" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $66.45

Our Price: $60.41

Savings: $6.04

Qty

Add

Magnate M130M38H4 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38H4 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M38H4 Bimetal Bandsaw Blade, 130" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $67.96

Our Price: $61.78

Savings: $6.18

Qty

Add

SuperCut B130G34H3 Carbide Impregnated Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G34H3 Carbide Impregnated Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130G34H3 Carbide Impregnated Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1-1/2" to 3" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $69.32

Our Price: $63.02

Savings: $6.30

Qty

Add

Magnate M130M12R24 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R24 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12R24 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.27

Our Price: $64.79

Savings: $6.48

Qty

Add

Magnate M130M34H3 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34H3 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34H3 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34V10 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V10 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V10 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34V4 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V4 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V4 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34V5 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V5 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V5 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34V6 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V6 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V6 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34V8 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V8 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34V8 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34W14 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34W14 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34W14 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M34W18 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34W18 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M34W18 Bimetal Bandsaw Blade, 130" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $71.45

Our Price: $64.95

Savings: $6.50

Qty

Add

Magnate M130M12H3 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H3 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M12H3 Bimetal Bandsaw Blade, 130" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $73.77

Our Price: $67.06

Savings: $6.71

Qty

Add

SuperCut B130S58T3 Carbide Impregnated Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130S58T3 Carbide Impregnated Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

SuperCut B130S58T3 Carbide Impregnated Bandsaw Blade, 130" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 10' 10" (10 feet 10 inch) Long, For Woodcutting Only

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $76.43

Our Price: $69.48

Savings: $6.95

Qty

Add

Magnate M130M58V10 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M58V10 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M58V10 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $77.87

Our Price: $70.79

Savings: $7.08

Qty

Add

Magnate M130M58V6 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M58V6 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M58V6 Bimetal Bandsaw Blade, 130" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $80.00

Our Price: $72.73

Savings: $7.27

Qty

Add

Magnate M130M1V10 Bimetal Bandsaw Blade, 130" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V10 Bimetal Bandsaw Blade, 130" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V10 Bimetal Bandsaw Blade, 130" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V2 Bimetal Bandsaw Blade, 130" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V2 Bimetal Bandsaw Blade, 130" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V2 Bimetal Bandsaw Blade, 130" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V4 Bimetal Bandsaw Blade, 130" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V4 Bimetal Bandsaw Blade, 130" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V4 Bimetal Bandsaw Blade, 130" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V5 Bimetal Bandsaw Blade, 130" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V5 Bimetal Bandsaw Blade, 130" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V5 Bimetal Bandsaw Blade, 130" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V6 Bimetal Bandsaw Blade, 130" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V6 Bimetal Bandsaw Blade, 130" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V6 Bimetal Bandsaw Blade, 130" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1V8 Bimetal Bandsaw Blade, 130" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V8 Bimetal Bandsaw Blade, 130" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1V8 Bimetal Bandsaw Blade, 130" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1W18 Bimetal Bandsaw Blade, 130" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1W18 Bimetal Bandsaw Blade, 130" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1W18 Bimetal Bandsaw Blade, 130" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $81.76

Our Price: $74.33

Savings: $7.43

Qty

Add

Magnate M130M1H3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1H3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M1H3 Bimetal Bandsaw Blade, 130" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $93.72

Our Price: $85.20

Savings: $8.52

Qty

Add

Magnate M130M114V2 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M114V2 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M114V2 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $96.29

Our Price: $87.54

Savings: $8.75

Qty

Add

Magnate M130M114V3 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M114V3 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Magnate M130M114V3 Bimetal Bandsaw Blade, 130" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' 10" (10 feet 10 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 130 inch (10 ft. 10 in.; 10' 10"; 10 pies 10 pulgadas; 130 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: JET MBS-1014W-1 (Metalcutting); JET MBS-1014W-3; JET VBS-16; FISCH 16" (128” to 130”); GENERAL 18" 90-260M1; GENERAL INTERNATIONAL 18" 90-260; GRIZZLY 18" Professional G4186Z; LAGUNA LT16 SEC 1999 (MEBER); LOBO 18" SQ HEAD 0181; MINIMAX 16" S-16; YORK 20"; Clarke Junior; Clarke Special; Cresent JR Light 20; Heska EL-40; Heska ESL-40; Kalamazoo 20-R; Kalamazoo 20-R-10; Kalamazoo 20-RF; Kalamazoo 20-RW; Kalamazoo 20-S-T; Muller SBS 410; Muller SBS 420; Muller SBS 430; Muller SBS 440; Muller SBS 450; Rapid SSF-420; Startrite 20-RF; Startrite 20-RWF; Startrite 20-RWH; Startrite 20-RWS; Startrite 20-V

List Price: $96.29

Our Price: $87.54

Savings: $8.75

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service