Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 93-1/2" Long > Bi-metal Bandsaw Blade, 93-1/2" Long
We found 34 results matching your criteria.


Sort By:
Page of 1
Magnate M93.5M12H4 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H4 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H4 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12V6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12V8 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V8 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12V8 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M38V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M38V14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38V14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38V14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12R14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M12R18 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R18 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R18 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $49.63
Our Price: $45.12
Savings: $4.51
Qty Add
Magnate M93.5M38H4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38H4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M38H4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $51.51
Our Price: $46.83
Savings: $4.68
Qty Add
Magnate M93.5M14H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14H6 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $51.59
Our Price: $46.90
Savings: $4.69
Qty Add
Magnate M93.5M14V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14V10 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $51.59
Our Price: $46.90
Savings: $4.69
Qty Add
Magnate M93.5M14V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M14V14 Bimetal Bandsaw Blade, 93-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $51.59
Our Price: $46.90
Savings: $4.69
Qty Add
Magnate M93.5M12H3 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H3 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12H3 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $53.99
Our Price: $49.08
Savings: $4.91
Qty Add
Magnate M93.5M12R24 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R24 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M12R24 Bimetal Bandsaw Blade, 93-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $53.99
Our Price: $49.08
Savings: $4.91
Qty Add
Magnate M93.5M34H3 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34H3 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34H3 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V10 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34V4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V4 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34V5 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V5 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V5 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34V6 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V6 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V6 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34V8 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V8 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34V8 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34W14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34W14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34W14 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M34W18 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34W18 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M34W18 Bimetal Bandsaw Blade, 93-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $55.90
Our Price: $50.82
Savings: $5.08
Qty Add
Magnate M93.5M1H3 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness
Magnate M93.5M1H3 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V10 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V10 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V2 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V2 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V3 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V3 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V4 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V4 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V5 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V5 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V6 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V6 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M1V8 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness
Magnate M93.5M1V8 Bi-metal Bandsaw Blade, 93-1/2" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness
more info
Our Price: $51.23
Qty Add
Magnate M93.5M58V6 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M58V6 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M58V6 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $60.78
Our Price: $55.25
Savings: $5.53
Qty Add
Magnate M93.5M58V10 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M58V10 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long
Magnate M93.5M58V10 Bimetal Bandsaw Blade, 93-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 9-1/2" (7 feet 9-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 93-1/2 inch (7 ft 9-1/2 in.; 7' 9-1/2"; 7 pies 9-1/2 pulgadas; 93-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); BRIDGEWOOD 14"; CENTRAL MACHINERY 00580-OBME; CHICAGO INDUSTRIAL 14"; DELCO 14"; Delta 28-203; Delta 28-243; Delta 28-245; Delta 28-283; Delta 28-303; ELEPHANT 14"; General International 90-125 M1; General International 90-125; Jet JWBS-140-S; Jet JWBS-14DX; Jet JWBS14-MW; Jet JBS-140-S; Jet JBS-14-MW; DELTA 14; Rockwell 28/200; Rockwell 28/203; Rockwell 283-X-0; Rockwell 28/230; Rockwell 28/243; Rockwell 28/283; Rockwell 28/297; Rockwell 28/300; Rockwell 28/303; PORTER CABLE 14"; PowerMatic PWBS-14CS; POWERMATIC 14" rollerquide-ro-top; RELIANT 14"; RIKON 10-320; RIDGID 14" RISER 105; RIKON 12" DELUXE 10-315; RIKON 14" 10-320; CRAFTSMAN 14"; MAKITA 14"; MILWAUKEE DELTA 14"; SHOPFOX 14" W1706; STAR MACHINERY 14"; STEEL CITY 14"; Bainbridge 712; Yates American W-14/14 more info
List Price: $60.92
Our Price: $55.38
Savings: $5.54
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 93-1/2 inch ( 7 ft. 9-1/2 inch, 7' 9-1/2" ) bandsaw blades.

Craftsman Professional 7” x 12”; Delta 28-203, 28-243, 28-245, 28-283, 28-303; Grizzly G1019, G0580X; G0555X (92-1/2" to 93-1/2"); General International 90-125 M1; Jet JWBS-14DX, JWBS-14CS,JWBS-14OS; JBS14-MW, JBS14-14CS, JBS14-140S; Chicago Industrial 14"; Reliant 14"; Central Machinery 00580-OBME; Elephant 14"; Rikon 10-315; PowerMatic PWBS-14CS; Enlon Brigewood; RIKON 10-320;