www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 92-1/2" Long > Bi-metal Bandsaw Blade, 92-1/2" Long

We found 26 results matching your criteria.

Sort By:

Page of 1

Magnate M92.5M12H4 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H4 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H4 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12V6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12V8 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V8 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12V8 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M38V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M38V14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38V14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38V14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12R14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M12R18 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R18 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R18 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $49.63

Our Price: $45.12

Savings: $4.51

Qty

Add

Magnate M92.5M38H4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38H4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M38H4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $51.51

Our Price: $46.83

Savings: $4.68

Qty

Add

Magnate M92.5M14H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14H6 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $51.59

Our Price: $46.90

Savings: $4.69

Qty

Add

Magnate M92.5M14V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14V10 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $51.59

Our Price: $46.90

Savings: $4.69

Qty

Add

Magnate M92.5M14V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M14V14 Bimetal Bandsaw Blade, 92-1/2" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $51.59

Our Price: $46.90

Savings: $4.69

Qty

Add

Magnate M92.5M12H3 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H3 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12H3 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $53.99

Our Price: $49.08

Savings: $4.91

Qty

Add

Magnate M92.5M12R24 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R24 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M12R24 Bimetal Bandsaw Blade, 92-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $53.99

Our Price: $49.08

Savings: $4.91

Qty

Add

Magnate M92.5M34H3 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34H3 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34H3 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V10 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34V4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V4 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34V5 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V5 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V5 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34V6 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V6 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V6 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34V8 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V8 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34V8 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34W14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34W14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34W14 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M34W18 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34W18 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M34W18 Bimetal Bandsaw Blade, 92-1/2" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $55.90

Our Price: $50.82

Savings: $5.08

Qty

Add

Magnate M92.5M58V6 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M58V6 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M58V6 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $60.78

Our Price: $55.25

Savings: $5.53

Qty

Add

Magnate M92.5M58V10 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M58V10 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Magnate M92.5M58V10 Bimetal Bandsaw Blade, 92-1/2" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 7' 8-1/2" (7 feet 8-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 92-1/2 inch (7 ft 8-1/2 in.; 7' 8-1/2"; 7 pies 8-1/2 pulgadas; 92-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Jet J-8203K; American Industrial AMT 4113; Buffalo 14"; Central Machinery 32206-OCEA; Central Machinery 32208-OCEA; Central Machinery 5687-OCEA; Central Machinery 2146-3BMF; Central Machinery 00580-OCEA; Dayton 3Z981; Duracraft 14"; Enco 199-9013; Enco 199-9011; Enco 199-9001; FOREMOST 14"; GRIZZLY 14 1/2" G-5965; GRIZZLY 14" G1019 (91-1/2” to 93-1/2”); Grizzly G0580X (92-1/2” to 93-1/2”); Grizzly G0555 (92-1/2” to 93-1/2”); Grizzly G0555X (92-1/2” to 93-1/2”); Grizzly G0555X Ultimate (92-1/2” to 93-1/2”); MARK 1 14"; MIT 5125; Nu-Mark 14"; OHIO FORGE 14"; POWERLINE 14"; SHOPCRAFT 28-283F; SPRUNGER 14"; TOTAL SHOP 14"; UNITED 14"; TRADESMAN 14" 8157; Wilton 8201; Wilton 8203; Wilton 8201VS; Wilton 8203VS

List Price: $60.92

Our Price: $55.38

Savings: $5.54

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 92-1/2 inch ( 7 ft. 8-1/2 inch, 7' 8-1/2" ) long bandsaw blades.

Jet J-8203K; Powerline Mark 1; Shopcraft 28-283F; MIT 5125; American Industrial AMT 4113; Enco 505-1372 (models 8201, 8203, 8201VS and 8203VS), 199-9013, 199-9011, 199-9001; Dayton 3Z981; Central Machinery 32206-OCEA, 32208-OCEA, 5687-OCEA, 2146-3BMF, 00580-OCEA; Nu-Mark 14"; Wilton Tradesman 8201, 8203, 8201VS, 8203VS; Grizzly G0580X; G0555X (92-1/2" to 93-1/2"); 14" Ohio Forge; Builders Square; Delco 14"; Duracraft 14"; Buffalo 14";

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service