www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 80" Long

We found 88 results matching your criteria.

Three Wheeler Bandsaw Blade, 80" Long For 2 and 3 Wheel Tabletop Band Saws

Carbon Steel Bandsaw Blade, 80" Long

Bi-metal Bandsaw Blade, 80" Long

For 2 and 3 Wheel Tabletop Band Saws

Carbide Tipped Bandsaw Blade, 80" Long

Hawc Pro Resaw Bandsaw Blade, 80" Long 0.045" kerf, High Silcon Content For Woodcutting

Carbide Impregnated Bandsaw Blade, 80" Long 0.030" kerf, For Woodcutting

0.045" kerf, High Silcon Content For Woodcutting

0.030" kerf, For Woodcutting

WoodSaver Plus Resaw Bandsaw Blade, 80" Long 0.030" kerf, Carbide Impregnated For Woodcutting

WoodSaver Resaw Bandsaw Blade, 80" Long 0.035" kerf, Carbide Impregnated For Woodcutting

Carbide Grit Gulleted Bandsaw Blade, 80" Long Med-Coarse, Cuts 1/4-in (6.4mm) or Thicker Abrasives and Hardened Material, NOT for Wood

0.030" kerf, Carbide Impregnated For Woodcutting

0.035" kerf, Carbide Impregnated For Woodcutting

Med-Coarse, Cuts 1/4-in (6.4mm) or Thicker Abrasives and Hardened Material, NOT for Wood

Carbide Grit Continuous Bandsaw Blade, 80" Long Med-Coarse, It Cuts 1/4-in (6.4mm) or Thinner Abrasives and Hardened Material, NOT for Wood

Med-Coarse, It Cuts 1/4-in (6.4mm) or Thinner Abrasives and Hardened Material, NOT for Wood

Sort By:

Page of 1

Magnate M80C14H4 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14H4 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14H4 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14H6 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14H6 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14H6 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14R10 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R10 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R10 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14R14 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R14 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R14 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14R18 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R18 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R18 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14W32 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14W32 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14W32 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

List Price: $13.95

Our Price: $12.68

Savings: $1.27

Qty

Add

Magnate M80C14R24 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R24 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C14R24 Carbon Steel Bandsaw Blade, 80" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $14.61

Our Price: $13.28

Savings: $1.33

Qty

Add

Magnate M80C38R24 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R24 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R24 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $14.96

Our Price: $13.60

Savings: $1.36

Qty

Add

Magnate M80C38H3 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H3 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H3 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38H4 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H4 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H4 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38H6 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H6 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38H6 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38R10 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R10 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R10 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38R14 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R14 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R14 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38R18 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R18 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R18 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

Magnate M80C38R8 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R8 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C38R8 Carbon Steel Bandsaw Blade, 80" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $15.24

Our Price: $13.85

Savings: $1.39

Qty

Add

SuperCut B80W14H6 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W14H6 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

When using a 2- or 3-wheel tabletop bandsaw, blade breakage and poor performance are common issues caused by the extreme flexing of the blade due to the small wheel size and the typically high operating speeds. This blade is made from special carbon tool steel with precision, heat-treated teeth, and a thinner (.014") design that allows it to endure sharp flexing and high-speed operation.

List Price: $15.97

Our Price: $14.52

Savings: $1.45

Qty

Add

SuperCut B80W14R14 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 14 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W14R14 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 14 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $15.97

Our Price: $14.52

Savings: $1.45

Qty

Add

SuperCut B80W14R24 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 24 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W14R24 Three Wheeler Bandsaw Blade, 80" Long - 1/4" Width; 24 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $15.97

Our Price: $14.52

Savings: $1.45

Qty

Add

Magnate M80C12H3 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H3 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H3 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12H4 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H4 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H4 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12H6 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H6 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12H6 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12R10 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R10 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R10 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12R14 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R14 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R14 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12R18 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R18 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R18 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12R24 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R24 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12R24 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C316S6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316S6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316S6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C12W32 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12W32 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C12W32 Carbon Steel Bandsaw Blade, 80" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.39

Our Price: $14.90

Savings: $1.49

Qty

Add

Magnate M80C316R10 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R10 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R10 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

Magnate M80C316R14 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R14 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R14 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

Magnate M80C316R18 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R18 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R18 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

Magnate M80C316R24 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R24 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316R24 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

Magnate M80C316S4 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316S4 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316S4 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

Magnate M80C316H6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316H6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C316H6 Carbon Steel Bandsaw Blade, 80" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $16.61

Our Price: $15.10

Savings: $1.51

Qty

Add

SuperCut B80W38H6 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 6 Hook Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W38H6 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 6 Hook Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $17.49

Our Price: $15.90

Savings: $1.59

Qty

Add

SuperCut B80W38R14 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 14 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W38R14 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 14 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $17.49

Our Price: $15.90

Savings: $1.59

Qty

Add

SuperCut B80W38R24 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 24 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B80W38R24 Three Wheeler Bandsaw Blade, 80" Long - 3/8" Width; 24 Raker Tooth; 0.014" Thickness; 6' 8" (6 feet 8 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $17.49

Our Price: $15.90

Savings: $1.59

Qty

Add

Magnate M80C58H3 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58H3 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58H3 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C58R14 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58R14 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58R14 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34H2 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H2 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H2 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34H3 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H3 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H3 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34H4 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H4 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H4 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34H6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34H6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34R10 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R10 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R10 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34R14 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R14 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R14 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34R18 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R18 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R18 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34R6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R6 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C34R8 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R8 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C34R8 Carbon Steel Bandsaw Blade, 80" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $18.95

Our Price: $17.23

Savings: $1.72

Qty

Add

Magnate M80C58H4 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58H4 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58H4 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $19.15

Our Price: $17.41

Savings: $1.74

Qty

Add

Magnate M80C58R10 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58R10 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C58R10 Carbon Steel Bandsaw Blade, 80" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $19.15

Our Price: $17.41

Savings: $1.74

Qty

Add

Magnate M80C18R14 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C18R14 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C18R14 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $20.52

Our Price: $18.65

Savings: $1.87

Qty

Add

Magnate M80C18R18 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C18R18 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80C18R18 Carbon Steel Bandsaw Blade, 80" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $20.52

Our Price: $18.65

Savings: $1.87

Qty

Add

SuperCut B80G38H4 Carbide Impregnated Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G38H4 Carbide Impregnated Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G38H4 Carbide Impregnated Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1" to 2-1/2" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $32.15

Our Price: $29.23

Savings: $2.92

Qty

Add

SuperCut B80G12H3 Carbide Impregnated Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G12H3 Carbide Impregnated Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G12H3 Carbide Impregnated Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1-1/2" to 3" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $33.33

Our Price: $30.30

Savings: $3.03

Qty

Add

SuperCut B80G14H6 Carbide Impregnated Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G14H6 Carbide Impregnated Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G14H6 Carbide Impregnated Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Cuts solid materials approximately 3/4" to 1-1/2" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $34.16

Our Price: $31.05

Savings: $3.11

Qty

Add

Magnate M80M12H4 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H4 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H4 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12H6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12V10 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V10 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V10 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12V14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12V6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V6 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12V8 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V8 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12V8 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M38V10 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38V10 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38V10 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M38V14 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38V14 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38V14 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12R14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R14 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M12R18 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R18 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R18 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $44.87

Our Price: $40.79

Savings: $4.08

Qty

Add

Magnate M80M38H4 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38H4 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M38H4 Bimetal Bandsaw Blade, 80" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $46.01

Our Price: $41.83

Savings: $4.18

Qty

Add

Magnate M80M14H6 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14H6 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14H6 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $46.64

Our Price: $42.40

Savings: $4.24

Qty

Add

Magnate M80M14V10 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14V10 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14V10 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $46.64

Our Price: $42.40

Savings: $4.24

Qty

Add

Magnate M80M14V14 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14V14 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M14V14 Bimetal Bandsaw Blade, 80" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $46.64

Our Price: $42.40

Savings: $4.24

Qty

Add

Magnate M80M12H3 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H3 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12H3 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $48.26

Our Price: $43.87

Savings: $4.39

Qty

Add

Magnate M80M12R24 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R24 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M12R24 Bimetal Bandsaw Blade, 80" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $48.26

Our Price: $43.87

Savings: $4.39

Qty

Add

SuperCut B80G34H3 Carbide Impregnated Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G34H3 Carbide Impregnated Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80G34H3 Carbide Impregnated Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; .042" Kerf; Premium Gold Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1-1/2" to 3" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.68

Our Price: $46.07

Savings: $4.61

Qty

Add

Magnate M80M34H3 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34H3 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34H3 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34V10 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V10 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V10 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34V4 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V4 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V4 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34V5 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V5 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V5 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34V6 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V6 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V6 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34V8 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V8 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34V8 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34W14 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34W14 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34W14 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M34W18 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34W18 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M34W18 Bimetal Bandsaw Blade, 80" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $50.71

Our Price: $46.10

Savings: $4.61

Qty

Add

Magnate M80M58V6 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M58V6 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M58V6 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $54.40

Our Price: $49.45

Savings: $4.95

Qty

Add

Magnate M80M58V10 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M58V10 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Magnate M80M58V10 Bimetal Bandsaw Blade, 80" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 6' 8" (6 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $55.28

Our Price: $50.25

Savings: $5.03

Qty

Add

SuperCut B80S58T3 Carbide Impregnated Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80S58T3 Carbide Impregnated Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80S58T3 Carbide Impregnated Bandsaw Blade, 80" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $64.38

Our Price: $58.53

Savings: $5.85

Qty

Add

SuperCut B80P58V3 Carbide Impregnated Bandsaw Blade, 80" Long - 5/8" Width; 3-4 Variable Tooth; 0.025" Thickness; .030" Kerf; WoodSaver Plus Resaw Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

SuperCut B80P58V3 Carbide Impregnated Bandsaw Blade, 80" Long - 5/8" Width; 3-4 Variable Tooth; 0.025" Thickness; .030" Kerf; WoodSaver Plus Resaw Blade; 6' 8" (6 feet 8 inch) Long, For Woodcutting Only

Cuts solid materials approximately 1" to 2-1/2" thick

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This blade features precision-ground teeth infused with carbide particles, delivering exceptional durability and long-lasting sharpness even when resawing the hardest, toughest woods. The carbide impregnated teeth outperform traditional punched or milled blades, while the polished sides and rounded back reduce heat buildup and vibration, ensuring a smooth, chatter-free cutting experience

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $75.35

Our Price: $68.50

Savings: $6.85

Qty

Add

Magnate M80E12T3 Carbide Tipped Bandsaw Blade, 80" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 6' 8" (6 feet 8 inch) Long

Magnate M80E12T3 Carbide Tipped Bandsaw Blade, 80" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 6' 8" (6 feet 8 inch) Long

This carbide-tipped bandsaw blade is designed with precision triple-chip ground teeth for smooth cuts and an excellent finish. Its high-performance steel back provides exceptional fatigue life. A carbide-tipped blade lasts significantly longer than carbon steel and bimetal blades when cutting abrasive non-ferrous materials and wood, especially tropical hardwoods like ebony, koa, and cocobolo. However, avoid using this blade to cut round logs unless you have a sawmill specifically designed for this purpose. For use with a metal-cutting bandsaw, it is ideal for cutting ferrous metals such as alloy steel, tool steel, bearing steel, carbon steel, stainless steel, and mold steel. Magnate Carbide Tipped Bandsaw Blades Application Notes: 1) 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4": Use 1/2" x 3 TPI, 3/4" x 3 TPI, or 1" x 3 TPI blades. 2) 1.3 TPI For cutting wood only from 3" to 12" (taller if fed slowly): Use 1" x 1.3 TPI blades. 3) 2 TPI For cutting wood only from 2" to 6" (taller if fed slowly): Use 1" x 2 TPI blades. 4) 2-3V For cutting wood from 1" to 6" (taller if fed slowly) or steel from 3" to 11": Use 1" x 2-3V, 1-1/4" x 2-3V or 1-1/2" x 2-3V blades. 5) 3-4V For cutting wood from 1" to 4" (taller if fed slowly) or steel from 1" to 6": Use 1-1/4" x 3-4V or 1-1/2" x 3-4V blades.

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 80 inch (6 ft. 8 in.; 6' 8"; 6 pies 8 pulgadas; 80 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Sears Roebuck 2428; Sears Craftsman 9HT2433N; Sears Craftsman 9HT2331N; CRAFTSMAN 12" TILTING TABLE 137.224320; Craftsman: 24331N; Craftsman 12" 22432; CRAFTSMAN 12" Pre-1991; General International 90-060 M1 (woodworking); HITACHI 12"

List Price: $184.38

Our Price: $167.62

Savings: $16.76

Qty

Add

Magnate M80G38MG Carbide Grit Bandsaw Blade, 80" Long - 3/8" Width; 0.025" Thickness; Gulleted Teeth for 1/4" or Thicker Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

Magnate M80G38MG Carbide Grit Bandsaw Blade, 80" Long - 3/8" Width; 0.025" Thickness; Gulleted Teeth for 1/4" or Thicker Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

This blade is not designed for woodcutting but must be used with a wood-cutting band saw. Do not use it with a metal-cutting band saw. It is ideal for cutting abrasive and hardened materials such as wire-reinforced rubber, steel-belted radial tires, ceramics, fiberglass, composites, hardened steel, cast iron (grey with voids), graphite, and case-hardened materials.

List Price: $217.43

Our Price: $197.66

Savings: $19.77

Qty

Add

Magnate M80G12MC Carbide Grit Bandsaw Blade, 80" Long - 1/2" Width; 0.025" Thickness; Continuous Teeth for 1/4" or Thinner Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

Magnate M80G12MC Carbide Grit Bandsaw Blade, 80" Long - 1/2" Width; 0.025" Thickness; Continuous Teeth for 1/4" or Thinner Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

List Price: $224.90

Our Price: $204.45

Savings: $20.45

Qty

Add

Magnate M80G12MG Carbide Grit Bandsaw Blade, 80" Long - 1/2" Width; 0.025" Thickness; Gulleted Teeth for 1/4" or Thicker Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

Magnate M80G12MG Carbide Grit Bandsaw Blade, 80" Long - 1/2" Width; 0.025" Thickness; Gulleted Teeth for 1/4" or Thicker Material; 6' 8" (6 feet 8 inch) Long, Med-Coarse, Cuts Abrasives & Hardened Material

List Price: $224.90

Our Price: $204.45

Savings: $20.45

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service