www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 71-3/4" Long

We found 61 results matching your criteria.

71-3/4" band saw blades suit for the following models:

Delta® 28-140 10"; Shopsmith® 10"

To dertermine bandsaw blade length:

1 - Check the owner's manual of your bandsaw machine for specifications.
2 - If the owner's manual is unavailable, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most accurate length.

Three Wheeler Bandsaw Blade, 71-3/4" Long For 2 and 3 Wheel Tabletop Band Saws

Carbon Steel Bandsaw Blade, 71-3/4" Long

Bi-metal Bandsaw Blade, 71-3/4" Long

For 2 and 3 Wheel Tabletop Band Saws

Carbide Tipped Bandsaw Blade, 71-3/4" Long

Hawc Pro Resaw Bandsaw Blade, 71-3/4" Long 0.045" kerf, High Silcon Content For Woodcutting

Carbide Impregnated Bandsaw Blade, 71-3/4" Long 0.030" kerf, For Woodcutting

0.045" kerf, High Silcon Content For Woodcutting

0.030" kerf, For Woodcutting

WoodSaver Plus Resaw Bandsaw Blade, 71-3/4" Long 0.030" kerf, Carbide Impregnated For Woodcutting

WoodSaver Resaw Bandsaw Blade, 71-3/4" Long 0.035" kerf, Carbide Impregnated For Woodcutting

0.030" kerf, Carbide Impregnated For Woodcutting

0.035" kerf, Carbide Impregnated For Woodcutting

Sort By:

Page of 1

Magnate M71.75C14H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M71.75C14R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C14R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.66

Our Price: $12.42

Savings: $1.24

Qty

Add

Magnate M71.75C38R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.83

Our Price: $12.57

Savings: $1.26

Qty

Add

Magnate M71.75C38H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

Magnate M71.75C38R8 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R8 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C38R8 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $13.89

Our Price: $12.63

Savings: $1.26

Qty

Add

SuperCut B71.75W14H6 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W14H6 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

When using a 2- or 3-wheel tabletop bandsaw, blade breakage and poor performance are common issues caused by the extreme flexing of the blade due to the small wheel size and the typically high operating speeds. This blade is made from special carbon tool steel with precision, heat-treated teeth, and a thinner (.014") design that allows it to endure sharp flexing and high-speed operation.

List Price: $14.77

Our Price: $13.43

Savings: $1.34

Qty

Add

SuperCut B71.75W14R14 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W14R14 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $14.77

Our Price: $13.43

Savings: $1.34

Qty

Add

SuperCut B71.75W14R24 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 24 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W14R24 Three Wheeler Bandsaw Blade, 71-3/4" Long - 1/4" Width; 24 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $14.77

Our Price: $13.43

Savings: $1.34

Qty

Add

Magnate M71.75C12H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H3 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C316S6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316S6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316S6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C12W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C12W32 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $14.88

Our Price: $13.53

Savings: $1.35

Qty

Add

Magnate M71.75C316R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R10 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M71.75C316R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M71.75C316R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M71.75C316R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316R24 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M71.75C316S4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316S4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316S4 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

Magnate M71.75C316H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C316H6 Carbon Steel Bandsaw Blade, 71-3/4" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $15.40

Our Price: $14.00

Savings: $1.40

Qty

Add

SuperCut B71.75W38H6 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 6 Hook Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W38H6 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 6 Hook Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $16.19

Our Price: $14.72

Savings: $1.47

Qty

Add

SuperCut B71.75W38R14 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W38R14 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $16.19

Our Price: $14.72

Savings: $1.47

Qty

Add

SuperCut B71.75W38R24 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 24 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

SuperCut B71.75W38R24 Three Wheeler Bandsaw Blade, 71-3/4" Long - 3/8" Width; 24 Raker Tooth; 0.014" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For 2 and 3 Wheel Tabletop Band Saws

List Price: $16.19

Our Price: $14.72

Savings: $1.47

Qty

Add

Magnate M71.75C18R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C18R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C18R14 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $18.34

Our Price: $16.67

Savings: $1.67

Qty

Add

Magnate M71.75C18R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C18R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75C18R18 Carbon Steel Bandsaw Blade, 71-3/4" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $18.34

Our Price: $16.67

Savings: $1.67

Qty

Add

SuperCut B71.75G38H4 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

SuperCut B71.75G38H4 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; .032" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

The Premium Gold Blade is a high-performance cutting tool designed for superior precision and durability. It features razor-sharp, precision-ground teeth, polished sides, and a rounded back for smooth feeding. With an aggressive hook and set, this blade delivers exceptional cutting efficiency. Most importantly, it undergoes SuperCut's exclusive carbide impregnation process, first developed for WoodSaver Carbide Resaw Blades. This process significantly extends blade life, ensuring unmatched durability. The carbide-infused teeth outperform traditional punched or milled blades, while the polished sides and rounded back minimize heat buildup and chatter for a flawless cutting experience.

List Price: $29.79

Our Price: $27.08

Savings: $2.71

Qty

Add

SuperCut B71.75G12H3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

SuperCut B71.75G12H3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

List Price: $30.86

Our Price: $28.05

Savings: $2.81

Qty

Add

SuperCut B71.75G14H6 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

SuperCut B71.75G14H6 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; .030" Kerf; Premium Gold Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

List Price: $31.87

Our Price: $28.97

Savings: $2.90

Qty

Add

Magnate M71.75M12H4 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H4 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H4 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12V6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12V8 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V8 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12V8 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M38V10 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38V10 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38V10 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M38V14 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38V14 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38V14 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12R14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M12R18 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R18 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R18 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.11

Our Price: $36.46

Savings: $3.65

Qty

Add

Magnate M71.75M38H4 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38H4 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M38H4 Bimetal Bandsaw Blade, 71-3/4" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $40.49

Our Price: $36.81

Savings: $3.68

Qty

Add

Magnate M71.75M14H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14H6 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $41.69

Our Price: $37.90

Savings: $3.79

Qty

Add

Magnate M71.75M14V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14V10 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $41.69

Our Price: $37.90

Savings: $3.79

Qty

Add

Magnate M71.75M14V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M14V14 Bimetal Bandsaw Blade, 71-3/4" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $41.69

Our Price: $37.90

Savings: $3.79

Qty

Add

Magnate M71.75M12H3 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H3 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12H3 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $42.35

Our Price: $38.50

Savings: $3.85

Qty

Add

Magnate M71.75M12R24 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R24 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75M12R24 Bimetal Bandsaw Blade, 71-3/4" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $42.35

Our Price: $38.50

Savings: $3.85

Qty

Add

SuperCut B71.75S58T3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

SuperCut B71.75S58T3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 5/8" Width; 3 Hook Tooth; 0.025" Thickness; .035" Kerf; WoodSaver Resaw Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

List Price: $56.78

Our Price: $51.62

Savings: $5.16

Qty

Add

SuperCut B71.75P58V3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 5/8" Width; 3-4 Variable Tooth; 0.025" Thickness; .030" Kerf; WoodSaver Plus Resaw Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

SuperCut B71.75P58V3 Carbide Impregnated Bandsaw Blade, 71-3/4" Long - 5/8" Width; 3-4 Variable Tooth; 0.025" Thickness; .030" Kerf; WoodSaver Plus Resaw Blade; 5' 11-3/4" (5 feet 11-3/4 inch) Long, For Woodcutting Only

List Price: $66.46

Our Price: $60.42

Savings: $6.04

Qty

Add

Magnate M71.75E12T3 Carbide Tipped Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 5' 11-3/4" (5 feet 11-3/4 inch) Long

Magnate M71.75E12T3 Carbide Tipped Bandsaw Blade, 71-3/4" Long - 1/2" Width; 3 Tooth; 0.025" Thickness; 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4" ; 5' 11-3/4" (5 feet 11-3/4 inch) Long

This carbide-tipped bandsaw blade is designed with precision triple-chip ground teeth for smooth cuts and an excellent finish. Its high-performance steel back provides exceptional fatigue life. A carbide-tipped blade lasts significantly longer than carbon steel and bimetal blades when cutting abrasive non-ferrous materials and wood, especially tropical hardwoods like ebony, koa, and cocobolo. However, avoid using this blade to cut round logs unless you have a sawmill specifically designed for this purpose. For use with a metal-cutting bandsaw, it is ideal for cutting ferrous metals such as alloy steel, tool steel, bearing steel, carbon steel, stainless steel, and mold steel. Magnate Carbide Tipped Bandsaw Blades Application Notes: 1) 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4": Use 1/2" x 3 TPI, 3/4" x 3 TPI, or 1" x 3 TPI blades. 2) 1.3 TPI For cutting wood only from 3" to 12" (taller if fed slowly): Use 1" x 1.3 TPI blades. 3) 2 TPI For cutting wood only from 2" to 6" (taller if fed slowly): Use 1" x 2 TPI blades. 4) 2-3V For cutting wood from 1" to 6" (taller if fed slowly) or steel from 3" to 11": Use 1" x 2-3V, 1-1/4" x 2-3V or 1-1/2" x 2-3V blades. 5) 3-4V For cutting wood from 1" to 4" (taller if fed slowly) or steel from 1" to 6": Use 1-1/4" x 3-4V or 1-1/2" x 3-4V blades.

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 71-3/4 inch (5 ft. 11-3/4 in.; 5' 11-3/4"; 5 pies 11-3/4 pulgadas; 71-3/4 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Delta 28-140; Shopsmith 505641; Shopsmith 10”

List Price: $160.11

Our Price: $145.55

Savings: $14.56

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service