www.magnate.net

Shop Online

Home > Bandsaw Blades > List By Bandsaw Blade Length - Non-Food Processing > Bandsaw Blade, 44-7/8" Long

We found 46 results matching your criteria.

Carbon Steel Bandsaw Blade, 44-7/8" Long

Bi-metal Bandsaw Blade, 44-7/8" Long

Sort By:

Page of 1

Magnate M44.875C14H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C14H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C14R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C14R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C14R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C14W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

List Price: $11.64

Our Price: $10.58

Savings: $1.06

Qty

Add

Magnate M44.875C38H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38R8 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R8 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R8 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.56

Our Price: $11.42

Savings: $1.14

Qty

Add

Magnate M44.875C38R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C38R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.79

Our Price: $11.63

Savings: $1.16

Qty

Add

Magnate M44.875C14R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C14R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $12.89

Our Price: $11.72

Savings: $1.17

Qty

Add

Magnate M44.875C12H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H3 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C316S6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316S6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316S6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C12W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C12W32 Carbon Steel Bandsaw Blade, 44-7/8" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $13.39

Our Price: $12.17

Savings: $1.22

Qty

Add

Magnate M44.875C316R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R10 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875C316R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R14 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875C316S4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316S4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316S4 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875C316R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R18 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875C316R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316R24 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875C316H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875C316H6 Carbon Steel Bandsaw Blade, 44-7/8" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $14.11

Our Price: $12.83

Savings: $1.28

Qty

Add

Magnate M44.875M38H4 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38H4 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38H4 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $34.96

Our Price: $31.78

Savings: $3.18

Qty

Add

Magnate M44.875M12H4 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H4 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H4 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12V6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12V8 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V8 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V8 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M38V10 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38V10 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38V10 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M38V14 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38V14 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M38V14 Bimetal Bandsaw Blade, 44-7/8" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12V12 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 12-16 Variable Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V12 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 12-16 Variable Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12V12 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 12-16 Variable Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $35.33

Our Price: $32.12

Savings: $3.21

Qty

Add

Magnate M44.875M12H3 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H3 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12H3 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $36.64

Our Price: $33.31

Savings: $3.33

Qty

Add

Magnate M44.875M12R24 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12R24 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M12R24 Bimetal Bandsaw Blade, 44-7/8" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $36.64

Our Price: $33.31

Savings: $3.33

Qty

Add

Magnate M44.875M14H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14H6 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $36.73

Our Price: $33.39

Savings: $3.34

Qty

Add

Magnate M44.875M14V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14V10 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $36.73

Our Price: $33.39

Savings: $3.34

Qty

Add

Magnate M44.875M14V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Magnate M44.875M14V14 Bimetal Bandsaw Blade, 44-7/8" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 3' 8-7/8" (3 feet 8-7/8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 44-7/8 inch (3 ft. 8-7/8 in.; 3' 8-7/8"; 3 pies 8-7/8 pulgadas; 44-7/8 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Milwaukee 6223; Milwaukee 6226; Milwaukee 6232; Milwaukee Model 2729-20; Black & Decker 3120; Black & Decker 3121; Black & Decker 3122; Black & Decker 3123; Black & Decker 3127K; Black & Decker 3125K; Grizzly G8692; Rockwell 725; Rockwell 726; Rockwell 524; Rigid 941; Rigid 942; Rigid 943; Greenlee 530; Skil 1010; Porter Cable 9725; Delta 524; Makita 2107FK; Northern Industrial Portable

List Price: $36.73

Our Price: $33.39

Savings: $3.34

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service