www.magnate.net

Shop Online

Home > Bandsaw Blades > Bi-metal Blades - Wood or Metal Cutting > Bi-metal Bandsaw Blade, 120" Long

We found 42 results matching your criteria.

Sort By:

Page of 1

Magnate M120M12H4 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12H4 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12H4 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12H6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12H6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12H6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12V10 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V10 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V10 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12V14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12V6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V6 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12V8 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V8 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12V8 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M38V10 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38V10 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38V10 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M38V14 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38V14 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38V14 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12R14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12R14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12R14 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M12R18 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12R18 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M12R18 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $59.17

Our Price: $53.79

Savings: $5.38

Qty

Add

Magnate M120M14H6 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14H6 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14H6 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $61.50

Our Price: $55.91

Savings: $5.59

Qty

Add

Magnate M120M14V10 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14V10 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14V10 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $61.50

Our Price: $55.91

Savings: $5.59

Qty

Add

Magnate M120M14V14 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14V14 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M14V14 Bimetal Bandsaw Blade, 120" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $61.50

Our Price: $55.91

Savings: $5.59

Qty

Add

Magnate M120M38H4 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38H4 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Magnate M120M38H4 Bimetal Bandsaw Blade, 120" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $62.56

Our Price: $56.87

Savings: $5.69

Qty

Add

Magnate M120M12H3 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M12H3 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M12H3 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $65.58

Our Price: $59.62

Savings: $5.96

Qty

Add

Magnate M120M12R24 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' (10 feet) Long

Magnate M120M12R24 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' (10 feet) Long

Magnate M120M12R24 Bimetal Bandsaw Blade, 120" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $65.58

Our Price: $59.62

Savings: $5.96

Qty

Add

Magnate M120M34H3 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34H3 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34H3 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34V10 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V10 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V10 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34V4 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V4 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V4 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34V5 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V5 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V5 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34V6 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V6 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V6 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34V8 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V8 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34V8 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34W14 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34W14 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34W14 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 14 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M34W18 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34W18 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M34W18 Bimetal Bandsaw Blade, 120" Long - 3/4" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $66.26

Our Price: $60.24

Savings: $6.02

Qty

Add

Magnate M120M58V10 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M58V10 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M58V10 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $72.23

Our Price: $65.66

Savings: $6.57

Qty

Add

Magnate M120M58V6 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M58V6 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M58V6 Bimetal Bandsaw Blade, 120" Long - 5/8" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $73.59

Our Price: $66.90

Savings: $6.69

Qty

Add

Magnate M120M1V10 Bimetal Bandsaw Blade, 120" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V10 Bimetal Bandsaw Blade, 120" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V10 Bimetal Bandsaw Blade, 120" Long - 1" Width; 10-14 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V2 Bimetal Bandsaw Blade, 120" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V2 Bimetal Bandsaw Blade, 120" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V2 Bimetal Bandsaw Blade, 120" Long - 1" Width; 2-3 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3-4 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V4 Bimetal Bandsaw Blade, 120" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V4 Bimetal Bandsaw Blade, 120" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V4 Bimetal Bandsaw Blade, 120" Long - 1" Width; 4-6 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V5 Bimetal Bandsaw Blade, 120" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V5 Bimetal Bandsaw Blade, 120" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V5 Bimetal Bandsaw Blade, 120" Long - 1" Width; 5-8 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V6 Bimetal Bandsaw Blade, 120" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V6 Bimetal Bandsaw Blade, 120" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V6 Bimetal Bandsaw Blade, 120" Long - 1" Width; 6-10 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1V8 Bimetal Bandsaw Blade, 120" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V8 Bimetal Bandsaw Blade, 120" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1V8 Bimetal Bandsaw Blade, 120" Long - 1" Width; 8-12 Variable Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1W18 Bimetal Bandsaw Blade, 120" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1W18 Bimetal Bandsaw Blade, 120" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1W18 Bimetal Bandsaw Blade, 120" Long - 1" Width; 18 Wavy Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $75.65

Our Price: $68.77

Savings: $6.88

Qty

Add

Magnate M120M1H3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1H3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Magnate M120M1H3 Bimetal Bandsaw Blade, 120" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $86.11

Our Price: $78.28

Savings: $7.83

Qty

Add

Magnate M120M114V2 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V2 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V2 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 2-3 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114V3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3-4 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114V4 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V4 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V4 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 4-6 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114V5 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V5 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V5 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 5-8 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114V6 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V6 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V6 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 6-10 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114V8 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V8 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114V8 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 8-12 Variable Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $88.95

Our Price: $80.86

Savings: $8.09

Qty

Add

Magnate M120M114H3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114H3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 10' (10 feet) Long

Magnate M120M114H3 Bimetal Bandsaw Blade, 120" Long - 1-1/4" Width; 3 Hook Tooth; 0.042" Thickness; 10' (10 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 120 inch (10 ft.; 10'; 10 pies; 120 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: CRAFTSMAN 15" 21431 INDUSTRIAL METAL CUTTING; DAKE 14-10;Dake SXC;DOAL; GENERAL INTERNATIONAL 90-840MI; Grizzly G0817; GRIZZLY G0659 9"x14" Vertical meat cutting; JET VSF-14-1; JET VSF-14-3;Luxo L-400X; Baxter Vericut 115-B; Carolina LCD-14 (CONTROL ON); DoAll 162; DoAll 16-2-A; DoAll 163; DOAll C-16; DoAll-HS; DoAll-HSV; DoAll-LHV; DOAll ML; DoAll-P-16; DoAll SFP; DoAll U-16; DoAll V-16; DoAll V-36; DoAll Z-16; DoAll V-16A; Ellis 1600; Milclark 10; Ramco SMD-814; Rapid SSF-801; Roll In EF-1459

List Price: $100.84

Our Price: $91.67

Savings: $9.17

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 120 inch ( 10 ft., 10' ) bandsaw blades.

Grizzley G0659 9"x 14" Vertical (Metalcutting); Dake 14-10; Dake SXC; General International 90-840 M1; JET VSF-14-1, VSF-14-3

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service