Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Bandsaw Blades > Bi-metal Blades - Wood or Metal Cutting > Bi-metal Bandsaw Blade, 60" Long
We found 16 results matching your criteria.


Sort By:
Page of 1
Magnate M60M38H4 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38H4 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38H4 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $34.96
Our Price: $31.78
Savings: $3.18
Qty Add
Magnate M60M12H4 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H4 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H4 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12H6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12V10 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V10 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V10 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12V14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12V6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V6 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 6-10 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12V8 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V8 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12V8 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 8-12 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/4" to 1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M38V10 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38V10 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38V10 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M38V14 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38V14 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M38V14 Bimetal Bandsaw Blade, 60" Long - 3/8" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12R14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12R14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12R14 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12R18 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12R18 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12R18 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $35.33
Our Price: $32.12
Savings: $3.21
Qty Add
Magnate M60M12H3 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H3 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M12H3 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $36.64
Our Price: $33.31
Savings: $3.33
Qty Add
Magnate M60M12R24 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' (5 feet) Long
Magnate M60M12R24 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' (5 feet) Long
Magnate M60M12R24 Bimetal Bandsaw Blade, 60" Long - 1/2" Width; 24 Raker Tooth; 0.020" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $36.64
Our Price: $33.31
Savings: $3.33
Qty Add
Magnate M60M14H6 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14H6 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14H6 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $36.73
Our Price: $33.39
Savings: $3.34
Qty Add
Magnate M60M14V10 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14V10 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14V10 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 10-14 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $36.73
Our Price: $33.39
Savings: $3.34
Qty Add
Magnate M60M14V14 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14V14 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long
Magnate M60M14V14 Bimetal Bandsaw Blade, 60" Long - 1/4" Width; 14-18 Variable Tooth; 0.025" Thickness; 5' (5 feet) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

Bimetal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods (especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8"" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

This 60 inch (5 ft.; 5'; 5 pies; 60 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly GI 010; Bainbridge 356; Bainbridge 457; Duro 3026; Wellsaw 300; Wellsaw 49; Wellsaw 49-A; Wellsaw JR; Junior Dayton 3Z360; Rigid 945; Emerson 10-1451; Emerson 10-1455; Greenlee 1357 more info
List Price: $36.73
Our Price: $33.39
Savings: $3.34
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc).

To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 20 - 24 variable to cut 1/16" to 1/4" thick material, 
* 14 - 18 variable to cut 1/8" to 3/8" thick material,
* 10 - 14 variable to cut 3/16" to 7/16" thick material,
* 8 - 12 variable to cut 1/4" to 1/2" thick material,
* 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material,
* 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material,
* 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material,
* 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material. 

The following bandsaw models use 60 inch ( 5 ft., 5' ) bandsaw blades.

Sears Craftsman; Atlas Excel; Wells 49, 300, 49A; Junior Dayton 3Z360, Shopmaster; Rigid 945; Emerson 10-1451, 10-1455; Greenlee 1357, Greenley; Grizzly GI 010