www.magnate.net

Shop Online

Home > Bandsaw Blades > Carbon Steel Blades - Wood or Metal Cutting > Carbon Steel Bandsaw Blade, 107" Long

We found 45 results matching your criteria.

Sort By:

Page of 1

Magnate M107C14H4 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14H4 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14H4 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14H6 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14H6 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14H6 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14R10 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R10 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R10 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14R14 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R14 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R14 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14R18 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R18 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R18 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14W32 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14W32 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14W32 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.26

Our Price: $14.78

Savings: $1.48

Qty

Add

Magnate M107C14R24 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R24 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C14R24 Carbon Steel Bandsaw Blade, 107" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $16.58

Our Price: $15.07

Savings: $1.51

Qty

Add

Magnate M107C38R24 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R24 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R24 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.00

Our Price: $15.45

Savings: $1.55

Qty

Add

Magnate M107C38H3 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H3 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H3 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38H4 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H4 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H4 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38H6 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H6 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38H6 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38R10 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R10 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R10 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38R14 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R14 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R14 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38R18 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R18 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R18 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C38R8 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R8 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C38R8 Carbon Steel Bandsaw Blade, 107" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $17.91

Our Price: $16.28

Savings: $1.63

Qty

Add

Magnate M107C316R10 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R10 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R10 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C316R14 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R14 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R14 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C316R18 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R18 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R18 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C316R24 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R24 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316R24 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C316S4 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316S4 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316S4 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C316H6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316H6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316H6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.09

Our Price: $17.35

Savings: $1.74

Qty

Add

Magnate M107C12H3 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H3 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H3 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12H4 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H4 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H4 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12H6 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H6 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12H6 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12R10 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R10 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R10 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12R14 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R14 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R14 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12R18 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R18 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R18 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12R24 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R24 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12R24 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C316S6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316S6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C316S6 Carbon Steel Bandsaw Blade, 107" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C12W32 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12W32 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C12W32 Carbon Steel Bandsaw Blade, 107" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $19.39

Our Price: $17.63

Savings: $1.76

Qty

Add

Magnate M107C58H4 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58H4 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58H4 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.19

Our Price: $20.17

Savings: $2.02

Qty

Add

Magnate M107C58R10 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58R10 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58R10 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.19

Our Price: $20.17

Savings: $2.02

Qty

Add

Magnate M107C34H2 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H2 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H2 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34H3 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H3 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H3 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34H4 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H4 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H4 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34H6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34H6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34R10 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R10 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R10 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34R14 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R14 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R14 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34R18 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R18 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R18 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34R6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R6 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C34R8 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R8 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C34R8 Carbon Steel Bandsaw Blade, 107" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C58H3 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58H3 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58H3 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C58R14 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58R14 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C58R14 Carbon Steel Bandsaw Blade, 107" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $22.69

Our Price: $20.63

Savings: $2.06

Qty

Add

Magnate M107C18R14 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C18R14 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C18R14 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $23.63

Our Price: $21.48

Savings: $2.15

Qty

Add

Magnate M107C18R18 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C18R18 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Magnate M107C18R18 Carbon Steel Bandsaw Blade, 107" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 8' 11" (8 feet 11 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 107-inch (8 ft. 11 in.; 8' 11"; 8 pies 11 pulgadas; 107 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: - Grizzly G0778 (105-3/4” to 107-1/4”) - Grizzly G0457 (105-3/4” to 107-1/4”) - Grizzly G1011 - Grizzly 8145Z (105-1/4” to 109-1/4”) - Dayton 5Z023 - Wilton 8014 (Metal 106” to 110-1/2") - Emerson 10-1700 - Emerson 10-1701 - Jet HVBS-712 - Rigid 970

List Price: $23.63

Our Price: $21.48

Savings: $2.15

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm.

However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 24 raker to cut 1/16" to 1/4" thick material,
* 18 raker to cut 1/8" to 3/8" thick material,
* 14 raker to cut 3/16" to 7/16" thick material,
* 10 raker to cut 1/4" to 5/8" thick material,
* 6 Hook to cut 3/8" to 2" thick material,
* 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material.

The following bandsaw models use 107 inch ( 8 ft. 11 inch, 8' 11" ) bandsaw blades.

Grizzly G1011, 8145Z (105-1/4” to 109-1/4”); Dayton 5Z023; Emerson 10-1700, 10-1701; Jet HVBS-712; Rigid 970

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service